Consumers who pay attention to the observation of friends will find that the washbasin will be connected to the bottom of a sewer hose, if the choice of installation is not appropriate in the early stage, then the later use of the process of operation will be found in the hose and the washbasin detachment, resulting in leakage of the trouble problem, so we should start from where to avoid this aspect of the failure? The answer is to refer to the installation of washbasin hose similar to the following operating procedures and precautions, combined with the guidance of professionals, the choice of reliable tools and materials to analyze, which can guarantee satisfactory final results.

A, basin sewer hose installation attention

Washing machine has a top drainage, bottom drainage. If the lower drain, in the original drain pipe at the installation of a tee fitting, respectively, connected to the washbasin drain and washing machine drain. If the washing machine for the upper drain: first in the original downpipe at the connection of a tee, and in the tee above the connection of a 60 cm long pipe (used as a washing machine drain), tee another mouth as a washbasin with water.

Second, the basin hose replacement installation

Remove the original damage to the drain, and use a knife to clean the basin drain, to ensure that clean and free of debris. This will ensure that there are no leaks after installation. Split the drain, install the middle part first, remove the lower part of the seal, align the water pipe with the overflow, gently put it in and rotate it to make the seal and the overflow fit tightly. Install the lower part of the seal in the downpipe and basin contact position, counterclockwise screws to make the lower seal and basin close fit, generally good quality seals can be installed manually to ensure the sealing effect, if you can not manually tighten the wrench can be used. Align the upper port of the downpipe with the lower port of the downpipe, and connect the downpipe. If the use of anti-odor type, pay attention to the downpipe and floor drain connecting parts of the close together.

Three, basin sewer hose replacement installation last step

Put into the spring downpipe last part, all installation is complete, press the downpipe seal, unscrew the water pipe poly water, and then again press the downpipe seal to release water, use normal, all pipeline seal intact without leakage. Congratulations, the replacement and repair of the downcomer and downspout has been completed.

Through the examples above, we can learn that in the process of installing the washbasin downspout hose, should pay attention to the place is more, first of all, a variety of tools and spare parts selection, only the right size and corresponding structure of the drain pipe joints and drain pipe material can help to achieve the advantages of the late solid and reliable performance, in addition to this, furthermore, can also be found, in the process of replacing and installing the Washbasin downpipe process should also pay attention to ensure that the sealing effect and connection is not tight, the corresponding order and some details are also more critical, we should refer to the above to understand.

Tubapu online free for everyone to provide "each decoration offer, 1-4 local decoration company, 3 sets of decoration design program", and decoration to avoid pit strategy! Click on this link:/yezhu/zxbj-cszy.php?to8to_from=seo_zhidao_m_jiare&wb, you can get it for free Oh~