1, alkaline formula: super detergent masterbatch+super saponified emulsifier+wire drawing powder+essence+preservative+salt+water.

2. Neutral formula: super detergent mother+super nano emulsifier+wire drawing powder+essence+preservative+salt+water.

* Compared with conventional detergent raw materials, super detergent masterbatch has six major differences:

1, a pure active ingredient with super degreasing and decontamination, high foaming, high consistency and transparency, and no invalid cost components.

2, the biggest advantage is that the ability to remove edible oil is super strong. It contains a lot of super emulsifier, which is incomparable to other raw materials.

3. It can remove industrial oil, mineral oil and inorganic oil that cannot be removed by conventional detergents.

4. In all the formulas, the same cost has the highest cost performance.

5. The thickening effect is very good, and 0.2 yuan can produce a catty of detergent with low cost.

6, can resist the influence of metal ions on active substances.

Super detergent masterbatch is specially developed by Chengdu Hengfeng Hongye Detergent Factory, which has the following characteristics:

I. Special functions

1, with excellent edible oil removal ability, has excellent emulsifying and cleaning ability for edible oils such as peanut oil, rapeseed oil, salad oil, corn oil, butter, sheep oil, lard, camellia oil, palm oil, vegetable oil and mixed oil.

2, strong decontamination ability, strong emulsification, dispersion, disintegration and separation ability for dirt, sludge, stains and stains.

3. Strong emulsifying ability. It has strong emulsifying ability for compound oil mixed with industrial oil, mineral oil, inorganic oil, organic oil, edible oil, animal oil and vegetable oil.

4, the thickening ability is good, salt can be added for thickening, and other thickening agents are not needed.

5, foaming ability is very good, instant foaming, secondary foaming and foam-increasing and foam-stabilizing effects are very good.

6. Super detergent masterbatch is an active ingredient, and there is no ingredient with invalid cost.

7. Very transparent, neutral, resistant to hard water and the influence of metal ions on active substances.

8. Super-saponified emulsifier has stronger degreasing ability than super-nano emulsifier, and super-nano emulsifier has higher foaming ability than super-saponified emulsifier.

9. For conventional low-priced 0.5 yuan, it is recommended to use an alkaline formula of less than one catty, and for medium and high cost, it is recommended to use a neutral formula.

Second, the production formula ratio reference (50 kg ratio)

1, cost per kilogram of 0.2 yuan: super detergent masterbatch 2.5kg+ wire drawing powder 20g+ essence, preservative, salt content+water 48kg = detergent, consistency can be piled up.

2. Cost per catty of 0.3 yuan: super detergent masterbatch 3.8kg+ wire drawing powder 20g+ essence, preservative, salt content+water 47kg = detergent, with good consistency.

3. The cost per kilogram of 0.4 yuan: super detergent master batch 4.5kg+ super saponified emulsifier (super nano emulsifier) 0.5kg+ wire drawing powder 20g+ essence, preservative, appropriate amount of salt+water 45 kg = detergent, and the consistency is close to bottled.

4. The cost per catty of 0.5 yuan: 5 kg of super detergent masterbatch+1 kg of super saponified emulsifier (super nano emulsifier) +20 g of wire drawing powder+essence, preservative and salt +44 kg of water = detergent, and the consistency is similar to that in bottles.

5. The cost per kg of 0.6 yuan: 5 kg of super detergent master batch +65438 super saponification emulsifier (super nano emulsifier) +0.7 kg +20 g of wire drawing powder+essence, preservative and salt +43 kg of water = detergent, and the consistency is similar to that in bottles.

6. The proportion of other expenses shall be adjusted according to the above data.

Third, the production process

1, production process: add super detergent master batch, super saponification emulsifier (super nano emulsifier), wire drawing powder, essence and preservative into water, stir and dissolve with a blender, and then add salt to thicken.

2. How to adjust the proportion of salt

1), initial salt ratio: First do a small test of one kilogram of product, the method is: pinch a little salt with your fingers (don't use a spoon), put a little less, put it once and stir it to dissolve, then put it again. When the consistency is generated, putting salt three times in a row can't improve the consistency, which shows that the salt ratio is enough. Salt should be measured first, and the proportion of salt used in one kilogram of products should be determined, and then the proportion needed for production should be enlarged.

2) Determine the proportion of salt: If the proportion of salt used in one kilogram of product is enlarged to the proportion required for production, there will be certain measurement error and it needs to be readjusted. Adjustment method: Knock out one kilogram of the prepared washing liquid and adjust the proportion of salt to the thickest state, then you can know the final proportion of salt.

3) Adjusting the proportion of salt: changing the variety of salt (edible salt, industrial salt, brine and raw salt), changing the weight of water, adjusting the formula, adjusting the cost and adjusting the raw materials involves one of these situations. Note: too much salt will turn into water, and the aqueous solution will turn white.

4) Beginners do experiments. First, do a small experiment of one kilogram of products. After all the raw materials are dissolved, divide them into ten parts to adjust the salt, and find a way first.