Human beings have been eager to fly since ancient times, the invention of modern airplanes so that flying in the sky has become a reality, but also with reference to the aircraft design of the aircraft model available for people to collect. In addition to directly buy ready-made aircraft model, you can also make their own, the following for you to introduce several aircraft model production steps:
A, ballpoint pen cap handmade helicopter model
Materials and tools:
Ballpoint pen cap, paper clips, blue cardboard, double-sided tape or glue, scissors, paper cutter.
Making steps:
1, take the ballpoint pen cap, make vertical and horizontal cuts at the bottom of the cap, bend the cut part to make two small wings, and bend the tail as the fuselage of the helicopter model.
2, take a piece of blue cardboard, use scissors to cut into two long strips of 5cm long, make a cross, tape or glue together, as the propeller of the model airplane.
3, bend the paper clip to make a landing gear for the helicopter model, tape or glue the propeller to the fuselage, insert the landing gear into the fuselage, the helicopter model made of ballpoint pen caps is finished.
Two, cans homemade airplane model
Materials and tools:
Waste milk cartons, cans, cardboard, colored paper, pencils, pins, spray paint cans, scissors.
Making Steps:
1.Draw the wings, tail and propeller of the airplane on the used milk carton and cut them out with scissors.
2, prepare a taller can, spray paint it outdoors and let it dry.
3.According to the size of the circle sunk in at the bottom, cut a piece of cardboard and glue it on, then drill a hole in the center and insert a pencil.
4.Glue a large wing in the nose position and two rectangular structures under the wing, the same height as the diameter of the can.
5. Glue another wing and insert the tail by cutting horizontally where the mouth of the can is.
6. Cut some yellow pentagrams out of colored paper as decoration and paste them on the wings and tail.
7, use the pegs to install the propeller, and tie a thin rope, a model of the airplane can be hung is ready.
Three, rubber band airplane model how to do
Materials and tools:
Cardboard, straws, ice cream sticks, propellers, rubber bands and paper clips.
Making steps:
1, two ice-cream sticks paste lengthened, and then paste the propeller with a turning tube to one end of the ice-cream stick, the turning tube can be made from pen tubes, quills and so on.
2. Attach a paper clip to the other end of the ice cream stick.
3. Cut out the wings and tail of the airplane on cardboard, and use tape paper to paste the wings onto the standing ice-cream stick.
4: Attach a leather strap, one end of which is hooked to the rotating shaft of the propeller and the other to a paper clip, and attach the tail to the end of the ice-cream stick.
5, with a straw to make the landing gear of the plane, and tape paper to the bottom of the wing, a powered model of the plane is made, rotate the propeller to save power, and then thrown out, you can fly in the air.
Four, clip DIY model airplanes
Materials and tools:
Ice-cream sticks, hot melt glue, clips.
Making steps:
1, three ice-cream sticks cleaned and dried.
2, in the front part of the wooden clip, metal wire around the point of hot melt glue.
3, press one ice-cream stick onto the hot melt glue to fix it as the front wing of the airplane model.
4, on the opposite side of the clip also similarly dotted with hot melt glue, the other ice cream stick fixed on, pay attention to be aligned with the other side of the wing.
5, at the end of the clip, also dot with hot melt glue, a slightly shorter ice cream stick will be pasted on it, cut down both sides of the round end of the ice cream stick, in the ice cream stick round end of the cut area, dot with hot melt glue, paste it to the tail wing.
6, fixed to ensure that the round head firmly, a mini toy airplane model is completed.