Materials/Tools: Plastic pipe (instead of bamboo), saw, rope, plastic bottle cap, wood blade and glue.

1, saw out four small tubes with a length of 2.5cm, and used them as the feet of bamboo people, as shown in the figure.

2. Saw out a small tube with a length of 3.5cm and use it as the body of the bamboo man, as shown in the figure.

3. Saw out four small tubes with a length of 2.5cm and use them as bamboo hands, as shown in the figure.

4. I saw a small tube 3.5cm long and used it as the head of a bamboo man.

5. Drill a hole under the cephalic tubule, as shown in the figure.

6. Put all the small tubes into a human shape, as shown in the figure.

7. Cut off the plastic around the plastic bottle cap, leaving only the bottom disc.

8. After the wafer is cut, drill a hole in the middle, as shown in the figure.

9. Put the disc and the bamboo man's feet on with a rope, as shown in the figure.

10, put on the small tube of the body and head, and then put the rope through the hole on the left side of the small tube of the head, as shown in the figure.

1 1. After the rope passes through the hole on the left, put it on the left hand, as shown in the figure.

12. Prepare another rope, and then put on your right foot and hand in the same way, as shown in the figure.

13. Tie a slipknot on the left and right sides with a rope, as shown in the figure.

14. Put wood blade Jr. on the slipknot and fasten it.

15. Stick a disc on the bamboo head, as shown in the figure.

16. Tighten the rope and the bamboo man will be ready.