Cooking rice: all rice cookers have a cooking shortcut.

1, put the rice inside the Nepal rice cooker. Then pour in appropriate water and wash the rice, commonly known as panning.

2, after the rice is cleaned, put in the appropriate water. The amount of water according to the amount of rice to determine the ratio of water and rice for 1:1 is more appropriate, that is, a bowl of rice and a bowl of water, take the bowl that prints the rice to print the water.

3, the Nepalese rice cooker liner around the water wipe clean, put the liner into the Nepalese rice cooker inside, cover the lid. Plug in the power supply. Press the power button to start steaming the rice, and the indicator light of the rice cooker will light up. It will take about half an hour to 40 minutes for the rice to steam.

4, after the rice is steamed, the rice cooker will automatically trip to the heat preservation state, and sound a tone, then the rice is cooked.

Expanded

Rice cooker knowledge

1, cooking rice, stew meat should be guarded to prevent soup and other spillage into the appliance, damage to the electrical components.

2, gently put, do not often bump the rice cooker. Because the inner liner of the rice cooker is easily deformed after being touched, the bottom of the inner liner after deformation and the electric heating plate can't match well, resulting in uneven heat when cooking rice, easy to cook raw rice.

3. When using the rice cooker, pay attention to the bottom of the pot and the heating plate to have good contact between the inner pot and the heating plate, you can turn the inner pot left and right several times.

4, rice cooked, the key switch will automatically pop up, this time should not be immediately open the pot, generally another 10 minutes or so in order to make the rice cooked.

5, in the cleaning process, do not make electrical parts and water contact, in order to prevent short circuit and leakage.

6, before cleaning the liner, you can soak the liner in water for a while, do not use a hard brush to brush the liner. After cleaning, to wipe clean with a cloth, the bottom can not take water into the shell. Shell and heating plate should not be immersed in water, only after cutting off the power supply with a damp cloth to wipe clean.

7, after using the rice cooker, should be immediately unplugged, otherwise, the automatic insulation is still in effect, both waste of electricity, but also easy to burn components.

8, should not cook acid, alkali food, and do not put in a corrosive gas or humid place.

9, when using, should be steamed food into the pot first, cover the lid, and then plug the power plug. The power plug should be unplugged before removing the food to ensure safety.

10, rice cooker pot body materials are ceramic, enamel, aluminum alloy and stainless steel. The inner wall of the inner pot is usually sprayed with a layer of polytetrafluoroethylene anti-scorching coating, so that the cooking is not easy to paste, and easy to clean.

If the pot body material is aluminum alloy, do not brush its surface when cleaning, because the aluminum in the material may enter the rice, long-term use will make the aluminum element damage to human brain cells, which affects the function of brain cells, leading to memory loss and slow thinking ability.

Rice cooker tips

1, rice cooker to make food, put the inner liner into the shell should be turned left and right a few times, so that the inner liner and the hot plate close contact.

2, the inner liner and the surface of the electric heating plate should be kept clean to avoid poor contact.

3, only when cooking rice will automatically trip, if stewing other food, to cook until the water is dry when the power will automatically cut off. So you should master the fire, pull out the power plug at the right time.

4, the inner liner of the rice cooker is aluminum products, should avoid collision deformation. If the inner liner and heating plate contact does not match, may burn the heating plate and thermostat. Deformation of the inner liner replacement, not with ordinary aluminum pot instead of use.

5, do not cook acid, alkali or too salty substances, should not be placed in a damp place to prevent rust. Rice cooker with soup, stew, someone should be present to prevent water spillage into the appliance damage to the electric heating original.

6, to first put the inner liner, and then plug the power plug. Take the liner should also be unplugged first to avoid electric shock.

7, rice cooker liner can be brushed with water, but its shell, hot plate and switch can not be wet washing, can be wiped with a dry cloth.

8, do not plug the rice cooker plug head lamp, lamp socket wire is thin, small current-carrying capacity, while the rice cooker's electric power, the amount of current through the larger, will make the lamp line heat, resulting in electric shock, fire and other accidents. So the rice cooker should have a separate plug, and with the corresponding specifications of the fuse.

9, rice cooker should not be used near other household appliances, and more should not be used together with other household electricity. Because the rice cooker heated, the spray of water vapor will make the television, tape recorders and other electronic components of the insulation decreases, so that the fan grille and other metal parts of the plating guide layer of rust, and will cause a serious short-circuit electrical appliances.

Reference: