Red packets to make lantern method tutorials are as follows:

Method one,

1, first of all, we have to prepare some don't want to red packets, and then it's the top of the seal with scissors to cut off, and then with a craftsman knife, the red packets of the three edges of it all apart.

2, a complete red envelope, we can split it into two pieces, then we have to take the back of the red envelope, and then use scissors to cut off part of its edge, about a centimeter or so wide.

3, then we have to take out the red envelope with letters on one side, and prepare a pen and ruler, and then the left and right sides of the red envelope, draw a line one centimeter wide, the interior is 0.5 millimeters for an equal part.

4, according to this method, the red envelope shell to the ready, and then cut the line later, it will become very even and straight.

5, divided into red packets, we also want to use a hand knife, according to the thin line divided into them. After all the red packet, then we have to prepare the right amount of double-sided tape, and the red packet shell left and right sides of a centimeter wide place, are glued with double-sided tape.

6, the red envelope with letters on one side ready, then we have to put it bottom side down, and stick to the surface of the bottom of the red envelope, so that the two sides of the red envelope, mixed into one side.

7, glued after the red envelope, we have to cut off part of his left side, and then the bottom of the double-sided tape, and glue them together, the bottom of the red lantern is completed.

8, ready for the bottom of the lantern, then we also want to prepare a, just cut out the edge of the waste, it will be folded together, and then glued to the top of the red lantern, a complete red lantern, even if completed.

Method two,

1, six of the red envelope folded in half, the top two corners folded outward, the bottom two corners folded inward.

2. Use double-sided tape to stick all the top folded corners together.

3. Take out the remaining six red envelopes and fold them in half, with the top two corners folded inward.

4. Fold the bottom two corners outward and glue the bottom corners together with double-sided tape.

5. Use double-sided tape to stick and hold up the top and bottom parts, and the hexagonal palace lantern is finished.