Find the bottom of the drift method illustrated as follows:

1, heavy lead to find the bottom.

First choose a good fishing position, to determine the approximate casting position, in the lead seat wrapped more lead, so that the weight of the lead is greater than the float's "lead" (recommended that newcomers to the purchase of floats ask the float's lead, and then combined with the weight of the lead, you can quickly adjust the drift), so that the float is completely submerged in the water.

2. Move the float up.

Gradually move the float upward, that is, toward the rod slightly, until the tip of the drift is flush with the water surface, at this time the distance from the lead holder to the tip of the drift is the depth of water at the fishing point, and the double hooks are lying on the bottom.

3. Move the float down.

This time the depth of the water is already known, you need to move the float down again, that is, to the direction of the lead skin to move, move the distance to be greater than the length of the subline (recommended than the subline length of about 20 centimeters).

At this point, the float is again submerged in the water, because to find the bottom is the lead skin to the bottom, the state of the subline is actually lying on the bottom, move the float downward than the subline length of 20 centimeters.

This time, after casting into the fishing point, the float is completely underwater, this time the float state is the same as the first picture, except that this time has been adjusted to the position of the float, that is, to determine the length of the rod tip to the float.

4. Trimming the lead skin.

Then keep trimming the lead so that the float reveals the amount of weight you want, a little at a time, no rush.

If you cut more than one time, you will have to wrap the lead into the lead skin again, firstly, the lead is easy to fall off, and secondly, it is very troublesome....... Every time you trim the lead, you will throw it into the fishing spot to see the floating state, until you reach the desired eye level, for example, adjusting the eye level of 4. At this time the double hook is in a suspended state.

5, hanging bait fine-tuning.

This time the double hook hanging bait fine-tuning, move the float upward (pole slightly direction) to our fishing eyes, for example, fishing 2 eyes, at this time the state of the double hook is a hook touching the bottom, a hook suspended.