1, prepare 5 Malacca first, Malacca has all kinds of colors, depending on personal preference. Malacca is 2440mm times 1200mm. The first step is to saw Malacca with a hand saw. The sawing method is 2440 mm by 550 mm. The rest saw 4 pieces without moving, and saw one 2440mm×80mm, 2440mm×80mm and 2440×50mm. Put it aside when you see it.

2. After sawing, measure the required size, that is, the width and height can't be moved by 2440mm, and then combine them into a wardrobe, which will be used as a self-tapping group and put on the back plate after combination.

3. Finally, install the telescopic rod and wardrobe door. Convergence band.

It should be noted that when installing the clothes rack, it should not be too high, otherwise it will be difficult to hang clothes and take clothes. Just determine the right position according to your height. The installation height of clothes rail should be the owner's height +20cm. The distance from the upper edge of the clothes rail to the top plate of the cabinet is 40-60mm.

Specific methods of self-made wardrobe

If you know a little about carpentry, you can make your own wardrobe. First of all, you have to measure in the room, remember that the specific data should be recorded in length, width and height. Then design the wardrobe according to this size. The wood of the wardrobe can be solid wood or cheap particleboard, and you can choose according to your own economic ability. Of course, the number of doors in the wardrobe should be designed. There are five wardrobes, four wardrobes and three wardrobes.

Then buy wood and cut it. Each board must be measured and then spliced together. All boards should be fixed with wooden nails or screws. Assemble the wardrobe according to the size and put it in the room.