Put the pot facing south-east, with the bottom of the pot 5 to 7 centimeters away from the ground. Let a person watch the signal quality on the TV. Turn the pot left and right, and turn the pot when the quality reaches its highest level. Fix it, then loosen the support rod that adjusts up and down, adjust the angle of the cauldron up and down, and have one person turn on the TV. When the signal is good, say stop. Tell the person adjusting it to stop moving, just fix it, and then it's OK. Can watch.

The satellite pot is a metal paraboloid responsible for reflecting satellite signals into the feed and high-frequency head located at the focus of the satellite antenna. The function of the satellite pot is to collect weak signals from satellites and remove as much noise as possible.

Extended information:

Satellite pan system composition

1. The parabolic antenna reflects and concentrates the energy of satellite signals in the starry sky into a focus.

2. The feed source is a speaker that gathers satellite signals at the focus of the parabolic antenna. It is called the feed source, which means the source of feeding energy. It is required to collect all the energy concentrated at the focus. Feedforward satellite receiving antennas basically use large-angle corrugated feeds.

3. The tuner (LNB, also known as downconverter) downconverts and amplifies the satellite signal from the feed source and then transmits it to the satellite receiver. The lower the noise level of the tuner, the better.

4. The satellite receiver demodulates the satellite signal sent from the tuner and demodulates the satellite TV image signal and audio signal.

Reference: Baidu Encyclopedia-Satellite Pot