1 Q? How to choose cabinets?
Answer: When choosing a custom furniture company, you should listen more, read more and know more, and sign a detailed contract. Drawings should indicate the base material, color and size of furniture; The choice of hardware must be good, such as cupboard door hinge, pull basket and so on. ; It is best to choose stainless steel or natural granite for the countertop. After the furniture is finished, be sure to inspect it to ensure that all materials are used correctly, and leave a balance before payment after inspection to ensure that there is no problem. In case of disputes, rights can be protected through contracts.
2 q? Key points of cabinet inspection?
Answer: See whether it meets the agreed brand, whether it is a regular manufacturer's product, whether it has a pungent smell, whether the surface is smooth, whether it meets the requirements of fire prevention and moisture prevention, whether the surface is scratched, whether the hardware is neat and meets the requirements of the agreed brand, and whether the cupboard door is flat.
3 q? How many times should I brush the polyurethane waterproof material?
Answer: Polyurethane environmentally-friendly waterproof materials are used for waterproofing in kitchens and bathrooms. Generally, it is required to brush three times, and it is advisable to add one or two times to the ground.
4 q? What are the main points of kitchen acceptance?
Answer: All kitchen equipment meets the requirements of the contract, the board surface is straight and clean, without dirt, all kinds of cupboard doors are opened smoothly, the cupboard doors are straight, the hanging cabinets are firm, and the fire boards have no peculiar smell.
Five questions? Construction procedures for manufacturing and installing fixed cabinets?
Answer: The construction procedure for manufacturing and installing fixed cabinets: setting out and positioning →? Install embedded parts →? Frame-making → Sticking plywood → Sticking battens → Assembling bottom plate, top plate and side plate → Installing partition plate →? Install partition →? Fix the wardrobe frame in place → Install the back plate →? Installation of doors →? Installation of drawers and hardware.
6 q? What are the technical points in the manufacture and installation of fixed cabinets?
A: 1. According to the design requirements, base position, floor and ceiling elevation, determine the vertical elevation of furniture components.
2. According to the design requirements, make the frame structure and correct its verticality and levelness, and then make side plates, top plates, partitions, linings, panels, doors and drawers. The assembled mortise should be brushed with woodworking glue.
3. Generally, the assembly of plate structure begins with the connection of horizontal plate and vertical plate, then checks the verticality, then assembles the top plate and bottom plate, and finally installs the back plate.
4. Frame locating pins shall be installed on the clapboards to adjust the spacing of clapboards.
5. Drawers should be connected by dovetail joint, and slideways should be configured during installation.
6. Hardware can be installed in place first, and then removed before painting. Hardware installation should be neat and firm.
7 q? How to connect the waterproof floor with the wall?
Answer: Generally, the wall facade is required to be waterproof for 25-30 cm. For example, the kitchen can be painted 1.8 meters to prevent wall leakage, and the bathroom is connected to the top surface; The facade of the light wall should be waterproof to prevent moisture from seeping out.
Eight questions? Key points of installation technology in gas appliance?
Answer: 1. Gas stove installation: check the appearance quality and accessories of the cooker, determine the installation position, fix the cooker, connect the gas pipeline, check and debug.
2. Installation of gas water heater: check the appearance quality and accessories of water heater, determine the installation position, install embedded parts, fix water heater, install exhaust pipe, connect gas and water pipelines, and check and debug.
9 q? Key points of installation technology of gas water heater?
Answer: 1. The gas water heater must be installed in a dry and ventilated place, and no obvious shaking or tilting is allowed.
2 gas water heater exhaust pipe must be installed to prevent return air device.
3. The installation height of the gas water heater should be 1350- 1600mm, and the gap between the left and right sides should not be less than150 mm. ..
4. The installation height of the gas water heater is about 100mm from the ground, and the surrounding space should not be less than 150? Hmm. (The installation of large-capacity floor-mounted gas water heater should build a platform at the bottom).
5. Ball valves should be installed at the water inlet and gas inlet of the water heater.
6. The installation of gas appliances should refer to the requirements of products and gas supply units. After installation, it has been debugged and operated normally, and there is no leakage in the test.
7. Close the main gas supply valve before handover and put it on the list. Not allowed to use, the product is protected.
8. The personnel who install gas appliances must undergo professional and technical training before construction.
Make clear these nine questions before kitchen decoration and cabinet purchase. I believe you can definitely choose a good cabinet with high quality and practicality. With a good kitchen, my wife can cook with ease, and it is also a good opportunity for the whole family to sit down and enjoy the food! For more questions about kitchen decoration and cabinet selection, please pay more attention to Tuba Rabbit Decoration Channel.