Shanning hood will definitely accumulate a lot of grease and dirt after a long time of use, causing its effectiveness to deteriorate. At this time it needs to be cleaned. But many people do not know how to disassemble and clean. The following is to introduce how to disassemble and clean the hood in Xianning.

One, dismantle the hood

First you need to dismantle the hood. Slowly press down from one side, and then gradually push the hood cover forward. Note: Never pull and tug hard, or it will be easily damaged.

Second, take out the metal mesh plate

Remove the fire plug, and then use flat-nosed pliers to pull out a few screws above the hood, and finally you can remove the metal mesh plate.

Three, the mesh plate cleaning

Cleaning the mesh plate is very simple, first use a brush to gently brush off the dirt, and then use water to rinse it clean.

Four, remove the suction plate

The suction plate will be removed, pay attention to observe the suction plate of the oil, such as more grease, you can put the suction plate into the warm water after soaking and then clean.

Fifth, remove the fan

Remove the fan, clean the fan leaf oil. At this time, it should be noted that the cleaning can not be scraped with hard objects, so as not to harm the blade.

After the cleaning is completed, the suction plate, mesh plate, metal cover and other parts of the reinstallation, through the boot test to see if the hood suction is back to normal.

Overall, the cleaning of the salty hood is very simple, as long as you follow the steps, you can let the hood back to normal use effect. It is important to note that you need to disconnect the electricity when cleaning and follow the instructions strictly to ensure safety.