To waterproof the kitchen, you should prepare tools such as brushes, rollers, electric mixers, non-woven fabrics or glass fiber nets, and also prepare waterproof coatings. This depends on your choice. Generally, you have to choose two kinds, one is special waterproof coating for the ground and the other is special waterproof coating for the wall.

2, the base surface repair.

Generally, the ground is uneven, so the kitchen base surface should be repaired first and then waterproof, especially in the corner of yin and yang, and the uneven place should be leveled. You can shovel out the protruding cement slag and sundries with a shovel, and repair and smooth the sunken place. If there are cracks or water seepage, it needs to be plugged and repaired.

3. The base surface is clean.

After the ground is repaired, it is also necessary to ensure that the base surface is free of any dust, particles and garbage. Therefore, it can be cleaned with water before construction, as long as the surface is wet and there is no Mingshui.

4, waterproof slurry mixing.

Make the ground waterproof first, so mix the waterproof paint on the ground first. Pour the waterproof paint into a plastic bucket according to a certain proportion, first pour the paint emulsion, then pour the powder, stir it evenly with a blender, stand for three minutes after it is in a particle-free state, and use it after eliminating small bubbles.

5, the ground waterproof slurry coating.

At this time, you can start brushing waterproof slurry. First of all, you should brush some special areas in a small area, especially floor drains, around pipes and corners. Then other areas can be painted for the first time in a large area. After the brush is soaked, the paint sticks to the brush in one direction, and the thickness of the paint film is within 1mm, which is easy to dry and not easy to bubble and crack. After drying, it can be painted in the cross direction for the second time to avoid brush leakage, and the closed water test can be carried out the next day.

6, wall waterproof slurry coating.

The kitchen space should also be waterproof to the wall, and its height is about 180cm, which can prevent the faucet from soaking the water on the wall. Its practice is the same as that of floor waterproofing, the only difference is that the waterproof slurry is different, and the special coating for wall surface should be used.