How to make a plan with word The method of making a plan with word is as follows:
1. First, when drawing a plan with word, click Insert above, then click the Insert button, and then select a rectangle in the pop-up graphic box.
2. Click the mouse to pull out a rectangle, then click the shape below the format to fill it, then click a color to fill the rectangle into a solid shape, and then draw the wall in the house plan.
3. If you want to draw the plan of the window on the wall, you should also use this rectangle, pull out the appropriate size, then copy it, and then click on the rotation to change the direction and use it in other places.
4. Next, draw the door in the floor plan. This is to draw a rectangle first. The length and width can be determined by entering the values in the upper right corner.
5. Then, in order to draw the arc of the door switch position, you can click the insert item, and then click the arc below the shape.
6. Regarding the thickness of this arc, you can click the shape outline below the format, and then click the corresponding thickness to set it.
7. Finally, after drawing other doors in turn (you can copy the marked floor plan of the doors), if necessary, you can add some text descriptions, so that the floor plan is drawn in word and the problem is solved.
Using word to make a plan can refer to the following methods:
1. Open the Word document window and switch to the Ribbon. Click the Shapes button in the Illustrations group, and then choose the New Drawing Canvas command from the menu that opens. Choose the command "New Drawing Canvas". Tip: You can also insert a shape directly into a Word document page without using a canvas.
2. Select the drawing canvas, click the Shape button in the Illustration group of the Insert ribbon, and select the appropriate flowchart to insert the Flowchart type. For example, select Flowchart: Process and Flowchart: Decision, and select Insert Flowchart Shape.
Many people choose to study design for three minutes, so it is best to take a quiz before studying.
→ Click to test whether I am suitable for learning design.
3. Click the "Shape" button in the "Diagram" group of the Word insertion ribbon, select the appropriate connector in the line type, such as the arrow and elbow arrow connector, and then select the connector.
4. Point the mouse pointer to the first flowchart figure (no selection is required), and then four blue connection points will appear around the figure. The mouse pointer points to one of the connection points, then press the left mouse button and drag it to the second flow chart graph, and the blue connection point will also appear on the second flow chart graph. Find one of the connection points and release the left key to complete the connection of the two flowcharts.
5. Repeat steps 3 and 4 to connect other flowcharts, and red dots will be displayed at both ends of the successfully connected connector.
6, according to the actual need to add text in the flow chart graphics, complete the flow chart production.
It is relatively complicated to do the scheme with word, so PS is recommended. To learn PS skills, you can go to Tianhu Education, which is a professional training institution. Tianhu Education offers graphic design course, combining teaching with practice, and playing with graphic design software to make students learn more interesting and master more firmly.
1. First, it is recommended to enable the drawing grid and set equal horizontal and vertical interval values.
Click the ellipse tool on the drawing toolbar, then hold down the Shift key and drag a perfect circle (hereinafter referred to as "left circle") on the canvas, press Ctrl+Shift+ mouse drag to copy a perfect circle (hereinafter referred to as "right circle"), and then press Ctrl+Shift+ mouse drag to copy a perfect circle (hereinafter referred to as "lower circle") and adjust it.
2. Select three circles in the box and press Ctrl+D to copy a set of circles, then set it to "no fill color" and move it to be completely coincident with the original three circles.
3. Select "bottom ring", enter "filling effect", and select the second "pattern" for filling, so as to achieve the effect shown in the following figure.
4. Select all three circles, copy them, paste them selectively → pictures (enhance graphic elements), then use the "cut" tool to cut them to the position shown in the figure below, and then move them to the right.
5. Select "Left Circle" and "Right Circle", enter "Stacking Order" and select "Move Up One Layer" to achieve the effect shown below.
6. Select all three circles, copy them, paste them selectively → pictures (enhanced graphic elements), then use the "cut" tool to cut them from top to bottom to the position shown below, and then move them to the lower right corner.
7. First change the filling color of the lower circle to white, and then change the filling effect of the right circle to the second pattern to achieve the effect shown below.
8. Select all three circles, copy them, paste them selectively → Picture (enhancing graphic elements), and then use the "Cut" tool to cut them from the upper right corner to the lower left corner to the position shown below.
9. Move the cutting pattern to the position shown below and combine it with the previously cut pattern.
10, press Ctrl+D to copy a copy of the same graphic, align it and "flip it horizontally", and then adjust the position to combine with other graphics.
1 1. Select the shadow graphic that was previously cut and placed in the lower right corner, enter Stacking Order and select Place on Top.
12. Select "Left Circle" and "Lower Circle" on the left, enter "Stacking Order", and select "Move Up One Layer".
13. reselect all three circles and then "merge".
14. Right-click the combination diagram to enter the object format dialog box, and set the rotation to 120 under the size tab.
15. Cut the rotated graphic, paste it selectively → Picture (enhanced graphic element), and cut it from top to bottom, as shown in the following figure.
16, the left and right sides can also be further cut as shown in the figure below.
17. After cutting, set its "rotation" to-120 (that is, the angle before recovery), and then move to the right to add other graphics.
18. press Ctrl+D to copy the same drawing, and then flip it horizontally.
19. Adjust the position of the flip graph to combine it with other graphs. That's it!
Right-click anywhere on the toolbar, such as where fonts are displayed, and then click Drawing to open the Drawing toolbar.
There are many optional graphics in the drawing toolbar, which can be classified after opening, such as Arrow Encyclopedia and Basic Graphics. Just draw it directly in the document. You can choose your own position and move when painting. If it is irregular, you can select "Drawing" in the drawing toolbar, which has the alignment option. In addition, it can be adjusted manually. For example, pressing Alt when dragging can achieve fine adjustment, pressing Shift can achieve strict vertical direction and 45-degree direction, and pressing Ctrl+ arrow keys can also achieve fine adjustment at pixel level. These can be done by force. Not as good as professional software, of course.
As for the effect diagram, you can spend a graphic, and then select "3D effect style" in the drawing toolbar to achieve a three-dimensional effect. Similarly, it is not as good as professional software. But what can be done at the moment. It depends on the technology. I want to make a plan of the leisure and entertainment restaurant, 10000 square meters.
What are the softwares specially used for drawing floor plans? 1、AdobePhotoshop
The abbreviation "PS" is an image processing software developed and published by Adobe _ ystems. Photoshop mainly deals with digital images composed of pixels. With its numerous editing and drawing tools, you can edit pictures effectively. Ps has many functions, including pictures, graphics, text, video, publishing and so on.
2. Open the canvas
OpenCanvas (OC) is a Japanese software mainly used for illustration. It has a huge user base in the field of comics and illustrations. It is a colorful painting tool. It is not only suitable for masters who are proficient in advanced techniques and pursue and enjoy painting fun, but also suitable for beginners to get started.
CorelDRAW
CorelDRAWGraphicsSuite is a graphic design software of Corel Company in Canada. This software is a vector graphics production tool software produced by Corel Company. This graphic tool provides designers with many functions, such as vector animation, page design, website production, bitmap editing, webpage animation and so on.
4. Illustration Studio
Illuststudio is a drawing software launched by CELSYS in August 2009, which has many drawing functions. The layer is powerful, and it also has vector function, and the brushes are rich and diverse. It integrates the functions of three softwares of saipspt! Is a software with good performance!
5、AdobeIllustrator
Adobeillustrator, commonly called "AI", is an industry standard vector illustration software for publishing, multimedia and online images.
This software is an excellent vector graphics processing tool, which is mainly used in printing and publishing, poster book typesetting, professional illustration, multimedia image processing and Internet web page making. It can also provide high precision and control for line drawing, and is suitable for making any small design to large-scale complex projects.
Reference source:
-Drawing software