The origami methods of the Crown are as follows:
1. Method 1
1. Prepare a square origami and fold it in half.
2. Fold it left and right, then open it, and fold both sides towards the center line.
3. Open the two corners downward to both sides.
4. Fold back the two outer edges and fold the lower corner.
5. Fold up the lower corner.
6. Just open it from the top, and the simple crown will be folded.
Method 2
1. Prepare a square piece of paper.
2. Fold upward.
3. Fold it to the left and open it again.
4. Align the two sides of the center line and fold in half before opening.
5. Align the center line shown in the figure, open both sides and press, both sides should be pressed.
6. Fold the other side back, both sides.
7. Fold the triangular part.
8. Align the center line and fold down, with all four sides.
9. Open the overlapping part to align the center line in the drawing and press it down, with all four sides required.
11. Fold the creases folded in the ninth step inward according to the creases, with all four sides required.
11. Fold back the extra corners and take all four sides.
12. Open it to form a body.
13. Press the edges and corners in a three-dimensional manner.
14, adding a little star is even more beautiful.
15, finally finished the production.
3. Method 3
1. First, take out a square piece of paper. If you don't have it, you can cut it. You can choose the color as you like. I used orange.
2. First, fold the diagonal of the square paper in half to form a triangle.
3. Then open the triangle and fold the other two corners in half to form a triangle.
4. After opening, a cross crease is obtained, and the corners of the four sides are folded to the center point to form a square.
5. Then turn to the back, fold the crease on one side to the middle line in half, and expose the lower corner at the same time, and fold the other side in the same way.
6. Put the two big triangles on the top upright, and fold the four corners towards the crease of the middle line to form a triangle.
7. This is a picture with four corners folded.
8. press down two large triangles.
9. Then put your finger in, prop it up, and pinch a crease at each corner to form a square shape as shown in Figure
11, so that the crown is folded.