(2) With a registered capital of 50 million yuan, he is a general taxpayer as stipulated in the tax law.
(3) Comply with the mandatory provisions of the National Technical Specification for Scrap Automobile Recycling and Dismantling Enterprises (GB22 128-2008).
(d) Coverage area shall not be less than 10000 square meters, including disassembly workshop, storage space and old parts warehouse.
(five) the annual recycling and dismantling capacity is not less than 500 vehicles.
(six) no less than 20 full-time employees, including no less than 5 professional and technical personnel.
(g) There are no illegal business records such as selling scrapped cars and scrapping five types of assembled cars.
(eight) environmental protection facilities such as hardening, leakage prevention and oil-water separation in closed or semi-closed dismantling workshops;
(9) Frame cutting equipment (including rainwater), flat device assembly and disassembly platform for car body cutting or fine disassembly platform equipment;
(j) Special waste collection devices and sealed storage containers, refrigerant collection devices with built-in air conditioners, waste storage containers with batteries, airbag detonators and other equipment; & ltBR/(K) It is helpful to improve the dismantling, clean environment, safe production, recycling and management, modern equipment and facilities, including: the recycling and dismantling process of scrapped cars, and the information management of some equipment; Equipment and facilities such as shelves and warehouses in classified parts stores.
(twelve) other conditions stipulated by laws and administrative regulations.
Materials to be provided:
(a) the preliminary examination opinions of the local municipal commerce authorities.
(2) application report.
(3) Shareholders' meeting, including name, domicile, legal representative, registered capital, shareholders and capital contribution.
(4) The resume of the legal representative to be appointed and a copy of the valid identity certificate, and the certificate (certificate) issued by the public security organ of the place of residence that the unit or community has no intentional criminal record.
(5) The original (including the copy of the inquiry letter sent by the bank, the copy of the bill, the bank's capital verification certificate, and the capital verification certificate issued by a legally qualified capital verification institution by a certified public accountant, each page is stamped with the official seal). It has been less than three months since the application materials for verifying the issuance date of the certificate were submitted to the provincial commerce authorities.
(6) Notice of pre-approval of enterprise name issued by the administrative department for industry and commerce. & lt/ (7) Feasibility study report, articles of association, internal management system and business rules that comply with laws, regulations and articles of association (including the management system for recycling end-of-life vehicles, the recycling system for end-of-life vehicles, the dismantling system for end-of-life vehicles, the sales system for scrap metal for dismantling end-of-life vehicles, and the sales management system for available parts for recycling and dismantling end-of-life vehicles).
(8) The business area is not less than 65,438+00,000 square meters, and the working area (including storage and dismantling sites) is not less than 6,000 square meters; Valid proof of the business place (ownership or right to use the lease right or funds for more than three years)
(ix) List of dismantled equipment (proof of purchase or lease).
(j) List of articles, list of fire control facilities and fire safety inspection opinions issued by the fire control administrative department at or above the county level.
(1 1) Local public security departments and industrial and commercial departments distribute original recordings, unsold scrapped cars, five-scrapped assemblies, assembled cars and other illegal evidence.
(twelve) the original certificate of the environmental protection registration form of the construction project issued by the local environmental protection administrative department.
(thirteen) the original certificate provided by the local public security department that the annual recycling and dismantling capacity of scrapped cars is not less than 500 vehicles.
(14) There shall be no less than 20 full-time employees, including at least 5 professional and technical personnel, and the employees shall be provided with the original pre-job training and professional qualification certificates.
(15) management, which adopts modern equipment and facilities to establish the dismantling files and databases of scrapped cars, and records the flow direction of parts after recycling, dismantling and dismantling of scrapped cars to meet the requirements of materials and wastes, office automation and real-time video monitoring equipment and facilities.
(16) Site requirements for the end of scrap car recycling and dismantling (see the approval form for details):
1, ground hardening operation space.
Storage space for scrapped cars (including temporary storage) to prevent liquid waste from reaching the ground. The materials used in the ground and skirt corners should be used to build a solid barrier. The impervious layer should be at least a clay layer with a thickness of 65,438+0m, or a high-density polyethylene or other artificial materials with a thickness of 2mm, so as to ensure that it will not be polluted by air, soil, surface water and groundwater. Open diversion channels should be set around the storage.
3. Close or semi-close the workshop floor on site to prevent leakage. The dismantling workshop should be well ventilated, well lit, safe and far away from residential areas, and should be built in urban residential areas, commercial areas and environmentally sensitive areas. The pollution control area should have wind and rain-proof facilities.
Oil-water separation devices and their connecting drainage pipes are set at four storage points and the sewage outlet of disassembly workshop, and the sewage recovered from separated waste oil is directly discharged into the water quality meeting the requirements of the third-class discharge standard.
5. For scrapped cars that are classified and evacuated for life-cycle liquid waste recovery, the evacuation rate of all kinds of liquid waste should be no less than 90%, and the sources of wastewater pollution must highlight different containers. Separation and recovery and evacuation standards.
6. Store old parts.
(17) Requirements for facilities and equipment for recycling and dismantling of final scrapped automobiles (detailed approval form):
1 Vehicle weighing equipment
2 Special waste collection and classified storage containers for indoor dismantling pretreatment platforms and equipment, preferably lifting platforms, are convenient for workers to discharge fuel and other liquid wastes at the bottom. The diameter of incompatible holes of waste liquid is not more than 70 mm, and the exhaust holes are clearly marked in various containers, which can be stored in leak-proof and overflow-proof containers.
Use special tools and containers for liquefied gas tanks, pumping units, liquid pumps and special tools required for battery disassembly, and empty and collect indoor liquid waste. You should use special tools to remove the pretreatment platform.
4 airbag detonating device. Units or enterprises that directly detonate automobiles after the airbag detonators are dismantled and stored shall directly dismantle and store the automobile detonators, so as to ensure airbag detonation and avoid accidents.
5. Classify storage capacitors, polychlorinated biphenyls (PCBs), oil filters and battery containers, which have the value of material reuse, but have the identification marks of hazardous substances and hazardous wastes, determine the names of specific substances, and collect the marks that the police determine that hazardous waste containers and materials meet the strength requirements.
Six shearing equipment, body cutting and flattening equipment.
7. Automobile lifting and transportation equipment.
Remove five main components to disassemble or finish the platform.
(eighteen) requirements for fire control facilities, environmental protection and storage of scrapped cars (see the approval form for details):
Fire-fighting facilities, fire extinguishers, fire pools, bunker fire exits.
2. All kinds of waste storage facilities shall comply with the national environmental protection standards GB 18599 and GB 18597 "Pollution Control Standards for General Industrial Solid Waste Storage and Disposal Sites" and be implemented.
3 different sorting and recycling containers. All kinds of wastes left by scrapped cars should be recycled by classification, and the evacuation rate of all kinds of liquid wastes should be no less than 90%, which is an important source of liquid waste pollution and meets the evacuation standards. Chlorofluorocarbons-
The refrigerant collection device of automobile air conditioner is 12, and the two refrigerant recovery and storage devices (SEPA application) are HFC 13a.
Five-star sealed container specially used for storing garbage. Volatility can prevent the waste of liquid. The container containing liquid waste must be in good condition, and the materials and lining are compatible with the liquid and do not react with each other.
Identify all kinds of storage parts, materials and waste containers to avoid confusion, and mix them evenly to avoid confusion of container parts caused by confusion. Stir well, and the contaminated container can be reused.
7. Clear identification. Dismantle all parts, materials and waste classified storage warehouses. Parts containing harmful substances shall be marked with the same type of harmful substances.
(nineteen) "Hunan Province scrap car recycling enterprise qualification approval form" format.
(twenty) documents required by the audit institutions.
& gt Note: The applicant should bind the application materials with A4 paper (with table of contents attached), and provide copies and originals.