"I want to do no main light, but I'm afraid that the ceiling home floor height will be depressing".

This has been the Top 10 in doing no main light design doubts.

This is because most of the impression of no main light lamps and lanterns remain in the embedded downlight, installation needs ceiling level.

As we all know, to do the ceiling without the main light in the height of the layer are bound to make some sacrifices.

Is it possible that the house has a lower floor height, there is no way to realize the design of no main light?

Today to share, do not need a ceiling, do not sacrifice the height of the storey, how easy to realize the design of the main light without luminaires!

01/

One light, many lights

The main thing about the design of no main light is to realize the zoning scatter lighting.

Double head and triple head are optional, multi-directional lighting.

Three-head than two-head one more light source, but both only need to reserve a wire, both in the realization of multi-directional lighting is very advantageous.

In the space of the lamp, the orientation of the lighting to determine a few light, the two together is not bad.

Multifunctional, but light health.

36 ° beam angle, the lamp body 360 ° rotation, the standard version of both wall washing, basic lighting.

Deep cylinder design, softer and more decent light, if matched with a frosted version, anti-glare index increased steeply, I have to say that the home light health has long been an important indicator of the selection of the main light.

Do the entrance, balcony in the small main light with only one wire.

One lamp, different light, their own DIY.

Light on the lamp can be manually switched to different optics, the standard transparent version of the luminous flux 600lm, to meet the daily activities of the illumination; frosted version of the luminous flux of 400lm, uniform brightening.

The lamp body rotates 360°, using different light output on one lamp, the frosted version for basic lighting and the standard version for local or basic lighting.

In the living room, dining room, bar with the most ingenious.

The light is soft and eye-friendly, and you can also change the color ring independently. In addition to the fine-tuning effect of the color ring on the light, you can also select different color rings according to the style of the home decorating color, the style of unity, echoing each other.

02/

Explicitly installed main light, brightness proportionality

Only to understand the presence or absence of the main light, only to produce a brightness just right expectations.

Brightness is determined by the light source, and the availability of ten or twenty lamp beads, however, leaves the Moonlight Box with a brightness that needs to be y proportioned to the space and individual needs.

30 ° beam angle, but to achieve a range of light, the body is not big but can dominate a world, as a small master light to use.

Living room, checkroom more suitable.

Smaller lamps, more attention to the appearance of the integration with the home.

Minimalist lines, a row of lamp beads emit a moonlike light, hanging on the ceiling like a flash of the moon.

Used in the living room to show temperament, party to give a sense of atmosphere;

Used in the dining room to increase appetite, soft light sprinkled, high apparent finger to restore the color of food.

The moonlight box of light, can be suitable for home dining room, bar.

03/

A light strip, a circle of light

The stealthy small hand, see the light does not see the light strip, the light is uniform and gentle, quick and easy to install.

Variety of shapes, length can be customized, is the perfect choice for creating a sense of space and atmosphere.

The existence of the strip lights up all the "cracks" in the home, which can be used as ceiling recess light, kitchen cabinet light, kicking light at night.

In fact, in the design of no main light, the light is not to be ignored, the decoration of the different conditions also have a lot to say, the next issue of the strip light topic, and then from all aspects of the detailed introduction.

Referring to the principle of choosing the basis of the lamps and lanterns without mains:

A. The appearance of the lamps and lanterns with personal aesthetics, home decoration effect fit

B. Lamps and lanterns design and the light source *** with the decision of the sense of light

C. Lamps and lanterns itself, such as saving the function of the wall near the IP level

So the home does not hang the ceiling to do the design of lamps and lanterns without mains, the appearance of the appearance of more than the embedded lamps, the light is not to be ignored, because it is more than the embedded lamp. Not to be ignored, because it is more than embedded lamps and lanterns in the home has a sense of presence, people need to use the combination of open lamps and lanterns with the use.

(Part of the picture from the network and user pictures)

The above content is shared by the good living user GELED Memory Point, I hope it can help you~