The mixing color of latex paint for painting walls is usually a milky white paint mixed with color flavoring. If a computer does the mixing, you will need the appropriate color card (color number). If you make your own, you can gradually add the color essence to the latex paint and keep stirring until you make the color you want. Since latex paint for painting walls gets slightly darker after a while, it will get brighter at the beginning of the mixing process.

The latex paint for brushing walls is best adjusted by the manufacturer. It is easy to adjust unevenly, and there is no guarantee that the color will be the same in every bucket instead of mixing with a primer. Both primer and topcoat need to be color-tuned, and then brush the latex paint. Color is adjusted by the manufacturer. If you choose the color it will be adjusted directly by the computer. I no longer need to color myself. Are you asking if the primer should be tinted? Primers and topcoats need to be tinted as well. To ensure even color when painting, most latex paints for painting walls are computer-tuned by the manufacturer after you select the color number. The primer and topcoat are the same color and remain the same when painted. Latex paint for brushing walls is colored with special color pastes, and the primer and topcoat need to be uniformly colored. The primer should be colored as the topcoat. If the primer is not colored, the builder needs to apply the topcoat. It is easy to cause uneven color. Under normal circumstances, the primer and topcoat need to be color-tuned.

How to color latex paint for painting walls; you should be careful when matching colors. In general, the sample is first tested to obtain a preliminary amount of color-matched paint, and then the sample is enlarged according to the results of the sample. First, the secondary and secondary colors are adjusted separately in a small container. During the color matching process, the colors of the paint and the dry film will be slightly different. When a wet film is applied, the color of the various coatings is usually lighter and deepens as the coating dries. Therefore, if the samples are dry, the color-matched coatings should be dried before the colors are measured and compared. Add the primary color (the color with a large and small amount of tinting power in the color match) first, and then slowly and intermittently add the darker color (or color match) with a large amount of tinting power, ? "light to dark", especially when adding strong coloring pigments, to avoid overdoing it. How to color latex paint for painting walls Note which accessories should be added during the color mixing process, such as drying agents, hardeners and thinners.

Tuba Rabbit online free of charge for everyone to provide "each decoration offer, 1-4 local decoration company, 3 sets of decoration design scheme", and decoration to avoid pit strategy! Click on this link:/yezhu/zxbj-cszy.php?to8to_from=seo_zhidao_m_jiare&wb, you can get it free of charge~