Hotel kitchen is a high-temperature and high-fume environment. For a long time, the interior of the range hood is easily blocked, which will not only affect the service life of the range hood, but also affect the hygiene and safety of the kitchen. Therefore, it is very necessary to clean the range hood regularly. This article will introduce the operation steps of cleaning the range hood in Xi 'an Hotel to make your hotel kitchen safer and more sanitary.

operating steps

preparing tools and materials

the following tools and materials need to be prepared for cleaning the range hood:

detergent (professional detergent is recommended)

washing (professional washing is recommended)

gloves, masks, goggles and other protective articles

ladders or pedals

garbage bags

Disassemble the range hood components

First of all. The specific steps are as follows:

Turn off the power switch of the range hood and disconnect the power cord.

remove the oil screen, oil cup, oil fume pipe and other parts of the range hood.

climb on the range hood with a ladder or pedal, and remove the hood.

put the removed parts into garbage bags for subsequent cleaning.

cleaning the range hood components

the removed range hood components need to be thoroughly cleaned. The specific steps are as follows:

Soak the parts of the range hood in water to soften the oil stain.

thoroughly clean the components of the range hood with detergent and washing.

after cleaning, rinse with clear water.

dry the cleaned range hood parts.

cleaning the interior of the range hood

Cleaning the interior of the range hood requires attention to safety, and it is recommended that it be operated by professionals. The specific steps are as follows:

Clean up the oil stain inside the range hood.

thoroughly clean the inside of the range hood with detergent and washing.

after cleaning, rinse with clear water.

dry the inside of the cleaned range hood.

installing the range hood components

after cleaning, you need to install the range hood components back. The specific steps are as follows:

Install the cleaned range hood components back to their original positions.

install the hood housing back.

install the oil screen, oil cup, oil fume pipe and other parts of the range hood back.

turn on the power switch of the range hood and check whether the range hood works normally.