Oil fume purifier is deeply loved by many chefs and friends for its unique oil fume purification function, and is widely used in kitchen oil fume purification. The oil fume is decomposed into oil particles, carbon dioxide and water through oil fume purification, and finally the oil particles are collected and put into clean air. After working for a long time, the fume purifier will accumulate a lot of dirt, which will lead to its poor purification effect. The lampblack purifier needs regular cleaning and maintenance to ensure the working efficiency and prolong the working life of the equipment. Many people may also clean the fume purifier regularly, but the efficiency of the equipment has been declining, and the cleaning method is wrong, of course, it has no effect. The following is a brief explanation for everyone by the kitchen ware camp: the correct cleaning and maintenance method of the lampblack purifier.

Cleaning and maintenance steps of oil fume purifier:

1, take out the electric field. What we want to clean is the battery in the lampblack purifier. Before taking out the battery, we must first turn off the power switch of the equipment and then carefully take out the electric field.

2. Water to be purified. Prepare a container for water first, and the size of the container should be able to hold the electric field. Warm water (40~50℃) is injected into the container, then caustic soda is added into the water, which is prepared according to the ratio of (1: 20), and the caustic soda is gently stirred to dissolve in the water. Pay attention to the amount of water to soak the electric field.

3. Soak the electric field. Put the electric field into the water in the container and soak it for 20 minutes. Lift the electric field repeatedly every 2 minutes until the electric field is clean.

4. Put the electric field on the ground. Take out the soaked electric field and lay it flat on the clean ground.

5, water gun flushing. Wash the electric field directly with a water gun, and wash the electric field clean. Washing with a water gun is because the water gun has a large impulse, which can wash away dirt that cannot be soaked and make the electric field cleaner.

6. Dry electric field. Put the electric field on the shelf, let the water on the electric field dry naturally, and then put the electric field back to the purifier after drying.