Recently, the "double standard" for floor paving has been officially implemented, and the national standard GB/T21238-2116 and the Technical Specification for Wood Floor Paving Engineering (CECS 191: 2115) issued by the Ministry of Construction will make the paving quality have rules to follow.

For the new wooden floor paving standard, provide consumers with 9 simple methods to check whether the wooden floor paving is qualified.

1. The used accessory system must be a qualified product.

2. The thickness of the mat must be greater than 2mm, and the whole mat has slight wave shape.

3. The maximum gap between skirting products and floor products should be less than 3mm.

4. According to the requirements of the paving standard, the height difference of the product should not be greater than 1.2mm.

5. Insert the back of the wallpaper blade into the horizontal and vertical joints of the floor. If it can be inserted, the gap may be too large.

6. The sawing door cover shall not be more than 1.1mm above the upper surface of the floor.

7. standing at the buckle, quickly tap the surface of the buckle with the sole of one foot to check whether the buckle is firm.

8. The consumption standard of the floor stipulates that the loss rate should not exceed 5%.

9. 8-12mm telescopic gap should be reserved at the junction of the floor, pipes and walls.