1. What's the furniture market like in Xianglu Reef?
How about Xianglujiao furniture market? Since it is a furniture market, of course, there are many kinds, brands and styles of furniture. Many people like to buy furniture here, which shows that its quality is guaranteed and its cost performance is good. Products belonging to mass consumption. Of course, some merchants have some high-end things, but compared with other furniture markets, the price is not high, and there are many good things to choose slowly. Have the feeling of scouring furniture, belonging to Dalian.
2. Where is the censer reef furniture market?
Where is the address of Xianglujiao Furniture City? Located near Qingniwa Bridge, Northeast Road, Xigang District. Bus lines are No.34, No.41,No.515, No.517, No.713, Dalian Bay-Jiefang Road, Dalian Bay-Qingniwa Bridge and Qingniwa Bridge-Qian. The roads will be crowded on weekends, so you can adjust the time according to your own needs, but if you buy small pieces of furniture, it is more convenient to drive there and transport it home directly.
Third, the skills of choosing furniture
1, depending on the production quality
(1), wooden furniture is composed of cutting, sawing, decorative edge sealing and assembling parts. The production quality of wood-based panel furniture mainly depends on its cutting quality, edge and surface decoration quality and panel port quality. There are quality requirements for straightness, verticality and angle of plate parts during cutting and sawing. Generally speaking, the cutting and sawing technology of plate meets the precision requirement within 0.0 1 mm per meter. After the plate is cut and sawed, the profile is flat and the angle is good, and the plate will not tilt after being made into furniture.
(2) Edge and surface decoration mainly depends on whether the glue on decorative parts is uniform, whether the bonding is firm, whether the trimming is smooth and smooth, whether the end faces of visible parts such as side plates, door panels and drawer panels of parts are edge-sealed, and no traces of bonding can be found on the edge contour of decorated plates. The assembly mainly depends on whether the tongue-and-groove at the drilling hole is exquisite and neat, whether the joint is firm after installation, whether there is any gap in the T-joint after the plane and the end face are connected, and whether there is any looseness after pushing. Whether the gap between the door and the drawer is too large is generally required to be between 1.5mm-2.0mm, and whether the push and pull of the door and drawer are flexible.
2. Is the furniture structure firm?
Small pieces of furniture, such as chairs, stools, hangers, etc. When selected, it can be dragged on the concrete floor, and the sound is crisp, indicating that the quality is better; If the voice is hoarse and cracked, it means that the tenon and mortise are not closely combined and the structure is not firm.
You can shake the table by hand to see if it is stable. You can sit on the sofa. If you sit on it, it will creak and shake. It's a manicure. It won't take long.
Square tables, bar tables, chairs and other legs should be fixed with four triangular clips. You can turn the tables and chairs upside down and touch them with your hands when choosing.
The above are some brief introductions about the furniture market of Xianglujiao. In fact, the quality of furniture in this market is still very guaranteed. Mastering some of the above information will be helpful to your choice.