model essay on rectification report format
model essay on rectification report format, rectification is to correct past mistakes, and rectification report is a serious style, so it is necessary to use accurate words and standardize the writing format. Let me give you a brief understanding of the model essay on rectification report format. Rectification report format 1
From June 9 to July 21, 2111, the Intensive Inspection Team of Air Pollution Prevention and Control of the Ministry of Environmental Protection inspected our district, and found that the pollution control facilities of 21 enterprises in our district were not operating normally and the scattered pollution was not thoroughly investigated. Qingyuan District attached great importance to it, made careful arrangements, conducted in-depth research on the existing problems, put forward specific rectification measures, defined the completion time limit, and instructed relevant departments to immediately organize rectification and finish it on time. The specific situation is now reported as follows:
1. Problems assigned by Luojiaying Yuanfeng Petrochemical Gas Station in Qingyuan District
1. No EIA approval procedures.
2. No oil and gas recovery device is installed.
implementation of rectification: in view of the existing problems, the environmental protection bureau of our district issued a notice of environmental monitoring site and ordered it to stop business. At present, the refueling equipment has been completely dismantled, and the oil storage tank has been filled with water and sand.
second, the problem assigned by the unnamed iron powder factory
: the supervision team refused to inspect when it showed the law enforcement certificate.
implementation of rectification: after investigation, the factory belongs to the enterprise of "scattering small and polluting", and now it has been banned according to "two breaks and three cleanups".
iii. Problems assigned by Baoding Dongfanghong Machinery Manufacturing Co., Ltd.
: At the time of on-site inspection, the factory was in production, DF-2 workshop was painted in the open air, VOCs were discharged unorganized, and there were no collection and treatment facilities and paint barrels for arbitrary discharge.
implementation of rectification: in view of the existing problems, the environmental protection bureau of our district dismantled the painting equipment of this enterprise and stacked the paint barrels in a fixed place in an orderly manner.
IV. Issues assigned by Beite Heavy Industry
: On-site inspection shows that the factory is in production, and 1. There are no environmental protection procedures; 2. Paint heavy machinery products in the open air, without waste gas collection and treatment device and unorganized emission of VOCs; 3. Exhaust gas collection and treatment facilities are not installed in the welding process, and exhaust gas is discharged directly.
implementation of rectification: in view of the existing problems, our district organized Baituan Township Government and Environmental Protection Bureau to jointly enforce the law, and now it has been banned according to "two breaks and three cleanups".
V. Problems assigned by Baoding Yiyou Furniture Co., Ltd.
: On-site inspection shows that the factory is in production, there is no VOCs collection and treatment facility in the painting process of furniture plates, and VOCs are discharged unorganized.
implementation of rectification: in view of the existing problems, our district cut off the power supply and dismantled the painting equipment (wood roller coating equipment) of this enterprise, and now the rectification has been completed.
VI. Problems assigned by Xinyang Machinery Factory in Qingyuan District
: On-site inspection of the factory is under production; 1. Paint products and equipment in the open air, without waste gas collection and treatment facilities and unorganized emission of VOCs; 2. No waste gas collection and treatment facilities are installed in the welding process, and waste gas is discharged directly.
implementation of rectification: in view of the existing problems, our district requires the enterprise to stop production and implement rectification measures. At present, a closed painting workshop of 12m _ 6m has been built and UV photooxidation waste gas treatment equipment has been installed. The welding workshop was sealed, and several mobile smoke purification and treatment equipment were installed, and the rectification has been completed.
VII. Baoding Southern District Hongguang Carton Factory
Assigned problem: The factory was in production at the time of on-site inspection. VOCS treatment facilities are not installed in the printing workshop; Ink wastewater is discharged into the sewer pipe where the equipment is put down, and then discharged directly.
implementation of rectification: after investigation, the factory is located in Luzhuang Village, belonging to Jiaozhuang Township, Lianchi District, Baoding City, and not under the jurisdiction of our district.
VIII. Problems assigned by Qingyuan Chengxin Water Washing Factory
: The factory was in production at the time of on-site inspection. When inspectors arrived at the factory gate, employees saw the law enforcement vehicles and closed the factory gate urgently. At 11: 15: 11:21, the inspector knocked at the door, and two employees, 1 men and 1 women * * *, went to inquire about the situation. After the inspector showed his identity, he not only refused to open the door, but also the local township government staff surnamed Liu came to open the door. The factory director didn't open the door for a long time, law enforcement officers failed to enter the factory, and the enterprise had enough time to temporarily open the treatment facilities.
implementation of rectification: in view of the existing problems, law enforcement officers in our district criticized and educated the person in charge of the factory, explained the Environmental Protection Law and other relevant laws and regulations, and asked them to actively cooperate with the environmental protection inspection. According to the relevant laws, he was fined 51,111 yuan, which has been paid.
IX. Unknown aluminum ingot smelting plant in Qingyuan District
Problems assigned: The plant was not produced at the time of on-site inspection, and the aluminum ingot smelting furnace in the smelting workshop was not equipped with waste gas collection and treatment facilities.
implementation of rectification: after investigation, this stall is illegal. In view of the existing problems, law enforcement officers in our district banned this stall on May 24, and looked back at this stall on August 5, and thoroughly cleaned the factory according to the principle of "two breaks and three cleanups".
X. Issues assigned by Qingyuan Huaqiang Metal Die Casting Co., Ltd.
: The company was in production at the time of on-site inspection. 1. The collection and treatment facilities of aluminum melting furnace were damaged, and there was a hole in the top of the collection cover; 2. The waste gas collection and treatment cover in the casting workshop has been separated from the pipeline, so it can't be collected, and the waste gas in the workshop is directly discharged through the roof ventilator; 3, waste gas collection and treatment facilities are not enabled, and workers temporarily open them during on-site inspection; 4. There is no waste gas treatment facility in the smelting workshop on the right side of the factory entrance, and the smelting furnace uses coal as fuel.
implementation of rectification: in view of the existing problems, the environmental protection bureau of our district ordered the enterprise to stop production and rectify immediately. At present, the maintenance and repair of waste gas treatment facilities have been completed, and all the smelting equipment on the right side of the factory has been dismantled. At the same time, the company has been fined RMB 1 million in accordance with relevant laws and regulations on environmental protection, and the punishment has been put in place.
XI. Problems assigned by Caiqiao Door Industry Factory in Qingyuan District
: The factory is in production, and there are the following problems: 1. The factory is using two coal-fired boilers (without nameplate identification, the initial judgment on site is 1.3 tons), using coal as fuel, supporting bag-type dust removal facilities, no desulfurization facilities, and direct discharge of SO2 flue gas; 2. In the painting workshop, the painting operation was not carried out in the special painting room, and VOCS were discharged directly.
implementation of rectification: in view of the existing problems, the environmental protection bureau of our district ordered it to stop production immediately and carry out rectification as required. At present, coal-burning facilities and painting equipment in the workshop have been dismantled.
XII. Problems assigned by pesticide plant, Baoding
: The company did not produce it at the time of on-site inspection, and there was no collection and treatment facility for organic waste gas from the liquid pesticide subpackaging process, and VOCs were discharged directly.
implementation of rectification: in view of the existing problems, the environmental protection bureau of our district ordered the enterprise to stop production and rectify. At present, VOCs collection and treatment facilities have been installed.
XIII. Problems assigned by Baoding Liyuan Copper Manufacturing Co., Ltd.
: The company was in production at the time of on-site inspection, and there were problems:
1. Environmental protection procedures were not provided on site;
2. The dust collected in the casting room is directly discharged to the outside;
3. The third smelting furnace has no smoke and dust collection and treatment facilities, and the smoke and dust are directly discharged to the outside; 4. The shot blasting machine has no dust collection and treatment facilities, and the dust is discharged unorganized. "Field investigation: there is no environmental protection procedure, and the dust is discharged directly.
implementation of rectification: in view of the existing problems, the environmental protection bureau of our district ordered the enterprise to stop production and rectify. At present, the technical transformation EIA has passed the project approval meeting, and production equipment and pollution control facilities are being installed in accordance with the requirements of the technical transformation EIA. At the same time, according to environmental laws and regulations, the company was fined 291,591 yuan, and the punishment has been put in place.
XIV. Issues assigned by China Energy Conservation Baoding Environmental Protection Energy Co., Ltd.
: After the on-site inspection of law enforcement officers showed their identities and showed their law enforcement certificates, the security guards refused to open the door and refused to inspect. On-site investigation: The company's security guard was hired by the security company. Due to the security system, the person in charge of the unit was not informed in time, resulting in the failure to open the door in time.
implementation of rectification: in view of the existing problems, law enforcement officers in our district criticized and educated the person in charge of the factory, explained the Environmental Protection Law and other relevant laws and regulations, and asked them to actively cooperate with the environmental inspection work, and have filed an investigation on them.
XV. Problems assigned by Tan Zhanwei Baking-Free Brick Factory
: There is no environmental assessment procedure, the ground is not hardened, the materials are piled in the open air, not covered, and there are no dust suppression measures.
implementation of rectification: in view of the existing problems, our district has completed the ban according to the principle of "two breaks and three cleanups".
XVI. Baoding alpha precision casting co., ltd.
assigned problem: its metal smelting furnace has no waste gas collection facilities.
implementation of rectification: in view of the existing problems, the environmental protection bureau of our district ordered the enterprise to stop production and transform immediately. At present, the factory has been demolished, and the enterprise plans to transform into logistics warehousing.
XVII. Problems assigned by Sheng Da Gas Protection Equipment Factory
: On-site inspection shows that the factory is in production, there is no environmental protection procedure, there is no voc collection and treatment facility in the painting workshop, and the dust is discharged unorganized.
implementation of rectification: in view of the existing problems, the enterprise has been required to implement the shutdown measures in the early stage, and its workshop and equipment have been dismantled during the review of law enforcement.
XVIII. Problems assigned by the unnamed steel processing factory
: The factory did not produce at the time of on-site inspection, and there was no special painting room for painting operation, so it was painted in the open air and VOCs were discharged directly.
implementation of rectification: after investigation, the factory belongs to caiqiao door manufacturing factory in Qingyuan county, which is actually the cutting workshop of caiqiao door industry, and there is no painting operation. Now the cutting equipment in this workshop has been dismantled and used as a warehouse.
XIX. Problems assigned by Beiyangzhuang Cement Brick Factory
: The factory was in production at the time of inspection, and the following problems existed outside the list of scattered pollutants: 1. No environmental protection procedures. 2. There is no cover in the yard and there is a lot of road dust. " Field investigation: the cement brick factory has no environmental protection procedures and belongs to a "scattered pollution enterprise"; There is no cover in the yard, and there is more road dust.
implementation of rectification: in view of the existing problems, our district has completed the ban according to the principle of "two breaks and three cleanups".
21. Problems assigned by Beiyingtou Yinsheng Weaving Factory in Qingyuan County
: At the time of on-site inspection, the company did not produce, and there was no environmental protection procedure. The oilcloth production line was equipped with waste gas collection facilities, but the generated VOCs were not treated.
implementation of rectification: in view of the existing problems, our district has completed the ban according to the principle of "two breaks and three cleanups".
XXI. Baoding Yongyi Building Materials Co., Ltd.
Issues assigned by Baoding Yongyi Building Materials Co., Ltd.: 1. 2. Materials and waste residues are piled up in the open air, and the road area is seriously dusty and uncovered, and the factory area is messy. 3. There is no EIA procedure. "On-site investigation: the company is located in Rongguanying, Suncun Township, Qingyuan District. The company has an industrial and commercial business license and has no environmental assessment procedures.
implementation of rectification: in view of the existing problems, our district has taken measures to cut off power and stop production for the company on June 3. At present, relevant equipment has been dismantled and bulk materials have been covered. Report format of rectification situation 2
After the Implementation Opinions of the District Committee and the District Government on Promoting the Activities of Enriching the People and Building an Efficient Hailing in the Region was issued, the streets in the city conscientiously implemented the spirit of the meeting, formulated the implementation work plan of our street according to the unified deployment of the District Committee and the District Government and combined with the actual situation in the city, and found out the outstanding problems in the efficiency construction in time through a comprehensive investigation of the administrative efficiency and executive power of the organs, and strictly formulated the implementation plan to clarify the rectification responsibility. The implementation of the rectification is now reported as follows:
1. Problems in checking and arranging
1. Problems in ideological understanding
1. Lack of understanding of the significance and importance of efficiency construction, which has nothing to do with oneself, and actions are not conscious enough to attract enough attention; Second, some people don't know enough about efficiency construction, and think that efficiency construction is a matter for leaders and has little to do with the staff, as long as they do their jobs well. Third, the promotion of efficiency construction is not strong. After some departments and units found the problems, they did not formulate and implement the rectification plan in time, and the promotion was not enough, and the improvement of administrative efficiency was not obvious, which affected the efficiency of work.
(2) Problems in work discipline
First, the assessment system of organs is not strict enough, and it cannot be regularized and institutionalized, and there is a phenomenon of being tight and loose, and the phenomenon of being late for work and leaving early occurs from time to time. Please cancel your leave system and fail to perform it well; Second, the spirit is low, individuals are not in the post, they don't contribute, they cope with it at work, they are lax in discipline, their sense of work responsibility is not strong, and they lack the spirit of pioneering and innovation; Third, supervision and inspection are not in place, the monthly assessment of individual departments is not rigorous, there are no severe reward and punishment measures, and there is a lack of a set of effective restraint mechanisms.
(3) Problems in work style
The work is not thorough enough, but it is big; Working procedures and links are not standardized enough; The service attitude is not enthusiastic enough, and there are some phenomena such as blunt attitude, poor service and nonstandard civilized language.
(4) Problems in work efficiency
First, the awareness of serving the overall situation is not strong, the interests of departments are over-emphasized, and some relationships have not been straightened out. Second, the handling of some things has not yet reached the satisfaction of the clients, and the work efficiency is not high.
Second, the main reasons
(1) Not paying enough attention to theoretical study. When the work is heavy and things are long, theoretical study is often regarded as a soft task and virtual work, and active self-study is neglected; Sometimes there is a pragmatic idea, and it is urgent to learn first, and there is a phenomenon that the time is tight and the time is loose, which causes the content of learning to be unsystematic, incomplete, not extensive and not profound. There is laziness in studying business. Some comrades think that science and technology managers are not scholars and lack conscious action to study business as a responsibility and a way to improve their ability.
(2) The working standard is not high enough. Work is done when it comes, when it doesn't come, etc., and it fails to actively go deep into the grassroots and the masses, investigate and study, and some departments can't go deep into the community to carry out twinning activities on a regular basis in strict accordance with the provisions of the division of labor in the community.
(3) the sense of innovation is not strong enough. Accustomed to seeing problems and doing things with old eyes and traditional ideas, some comrades have a weak sense of pioneering, and they are stuck in the old model and lack innovative spirit in dealing with new problems. Faced with the new situation and new tasks, when the conditions are not available at the moment, some comrades have a fear of difficulties and worry. They dare not rush in their work, dare not try, and dare not set higher goals and requirements, resulting in various potentials not being fully tapped.
iii. rectification measures
in view of the above problems, our street has carefully studied and formulated rectification measures, defined the rectification time and responsible person, and ensured that all tasks are implemented.
(1) Strengthen study, raise awareness, and ensure the quality of institutional efficiency construction.
do a good job in learning and establish and implement various learning systems. Seriously organize and study the important spirit of the district party Committee and district government on carrying out efficiency construction, and hold a mobilization meeting on the theme of "enhancing discipline and improving execution", closely combining the two, and mentioning