How many people in a general architectural design company, what positions

Ordinary design company about 50-100 people, the size of the design institute varies, the large design institute 300-500 people, small point of the 100 or less there, the position of the dean - director (project manager) - project manager - a professional responsible for the designers of the various professions.

How many architectural design companies in Guiyang

Weiqing Road, Zhongjian Building (next door to the Shanlin Hotel) on the fourth floor, the Design Research Institute, a professional architectural design company. Looking for Chen Zhuo, Wang Ke.

What is the ancient architecture design company in Zhejiang?

Zhejiang has a lot to do with the ancient architecture of the company ah, depending on which you need, with qualifications and long experience in the design institute is relatively small, you can learn about some specific cases, such as the Liujiang Ancient Town, "Vision Design Institute - Hanzhong Zhuge Ancient Town," and so on, and more references

What is the ancient architectural design company in Chongqing

Chongqing a lot of ah, create Ancient architecture tourism complex features, the establishment of benign green space system, to create a cultural landscape environment has become a rise. Vision Design Institute antique building design experts: antique buildings as a combination of ancient architectural art and modern science and technology products, inherited the beautiful shape of the ancient architecture, the momentum of the huge set of features, enhanced structural disaster resistance and durability, and make its structural type has been a great development, is a perfect blend of modern and ancient technology

Shijiazhuang architectural design company how many, thank you all!

Jia Lin, Jiamei, Lanxiang, often giant set, Strong, Weston, Jing Palace, Great Wall, more, all have qualifications ah.

There are several in Bazhong are quite good ah, to combine the contemporary actual situation, to achieve the dual coordination of commercialization and leisure of ancient buildings. Vision Design Institute antique building design experts said: antique buildings as a combination of ancient architectural art and modern science and technology products, inherited the ancient architecture of the beautiful shape, the momentum of the huge set of features.

In the design capital, Shenzhen has what architectural design company

Green Pengcheng Design Institute ...... much

Architectural design company to costumer, architectural design company to costumer knowledge

can, first of all, depending on your college major, if non-costing professional, you need to take the first test of the budgetary officer, one year before being allowed to take the test of costumer, of course, local regulations are slightly different. The first thing you need to do is to get a good deal on a new product or service, and then you can get it back.

Any architectural firms use SketchUP

Depending on the level of complexity, it takes about 3--6 hours.

SKETCHUP modeling basic steps:

1, ready to guide the map before the preparatory work

2, remitted to the CAD file

3, stretching the various floors of the block

4, open windows and doors (whether or not to build the window frames, according to the actual situation needs to be carried out)

5, add a new balcony (balcony made in accordance with the actual depth of) outdoor staircases. (the depth of the balcony production according to the actual situation needs to be carried out) outdoor stairs and other external components that need to be produced.

6, add a new page to determine the positioning of the observation angle of the mold.

7, remitted to the JPG image file, for the post-processing stage to provide architectural images.

First, in the remittance of CAD before the following preparatory work must be done:

⒈ in the DWG file according to the actual situation of the unwanted lines, layers, all cleared out.

Note:

① clean up the process to give full consideration to the sketch elevation block in and out of the relationship, to ensure that the internal needs of the wall is not removed.

② CAD graphics remittance, in the remittance of graphics according to the need for the main body and balcony and so on separate remittance.)

2. In SKETCHUP open program, select "View" in the "User Settings" command, in the dialog box that appears:

① Set the "Basic Units" in the "Set Basic Units" selection item. In the dialog box that appears:

①Select "Decimal" for "Unit Form" in the "Set Base Unit" selection item.

② Deselect the "Show outline" selection in the "Render" option. This is to ensure that the lines in the imported dwg file become thin lines for accurate modeling. (This procedure can also be done after importing the dwg file, and will produce the same results.)

Second, the import of DWG files:

1. Select the "File" option in the menu, select the "Import" command, and select the "Import DWG/DXF" option in the submenu. Select the "Import" command and select the "Import DWG/DXF" option in its submenu. After that, the system will automatically pop up a dialog box, in the lower right corner of the dialog box there is an "option ......", click on it and a new dialog box will come out, in this dialog box, select the "unit" for mm, "unit" for mm, "unit" for mm, "unit" for mm, "unit" for mm, "unit" for mm, "unit" for mm. In this dialog box, select the "unit" for mm, (this option is recommended to use this unit, select this unit is to ensure that the cad map into sketchup and cad in the map to maintain the ratio of 1:1, so that in the model can be guaranteed to generate a three-dimensional from the plane, the height in accordance with the actual size of the stretching.

2. Then select the dwg file you want to import and choose the "import" command. cad drawings are automatically imported into sketchup.

Third, the establishment of the model:

First, the processing of cad drawings into sketchup:

1. The cad drawings into sketchup for the group A,B,C,D ...... (the planes of the various floors are grouped separately, such as convergence of the elevation, the elevation should be grouped separately). separately grouped).

2. A,B,C,D......copy an A',B',C',D'.... ..., as a reference. Put it next to the first organization A,B,C,D .......

(So that when you encounter a difficult shape or a figure that is not easy to make when building a model, you can blow up this group A',B',C',D'...... and select the part you need to pull from it. From there, select the desired part to stretch, and put the stretched block into the main model.)

Second, sketchup model construction:

1. wall production

A,B,C,D ...... to build the model, make full use of the rectangle command to form a plane on the plane of the closed graphic (plane as long as it is closed, closed part of the internal automatically with a fill color,) so as to stretch the plane to generate a plane. ) in order to stretch the plane to generate three-dimensional. [Face A (a layer of planes) only plays a role in modeling dimensional positioning measurements].

When stretching the height of a block, you can enter the corresponding height in the data box on the bottom right of the modeling interface, and pay attention to the clear grouping of the model according to the actual need. If there are no special circumstances, the general method is to stretch the layers, and then create a block, the built layers of the block for the upper and lower splicing. Form the main body of the building.

2. window production

The wall stretching can not be the first to not consider the issue of the window, in the block wall stretching is completed, and then open the window on the wall, open the window holes in different ways, I am accustomed to the use of the edge of the wall line offset to the edge of the window holes should be opened, up and down the left and right of a,b,c,d,, after the a,b,c,d, the four lines of the ends of the redundant portion of the deleted, select the a,b,c,d, on the wall.

The production of window frames in the elevation using the rectangle command to form the closed and window frame planes, after which they are stretched to form windows and grouped.

3. Glazing

The windows on the walls with different setbacks are glazed individually, and grouped with the corresponding window frames to form a new combination for movement and management, (which can be made into a layer for management). If the model is multi-layer, and the upper and lower layers of glass in the vertical direction on the same surface, you can use the top layer to the bottom of the length of the production of a large piece of glass to represent (this is conducive to the management of glass in this case).

4. Steps

It is recommended to build the steps at the end of the modeling of the first floor, and when the steps (or outdoor stairs) are built, they are made as an element and placed in the appropriate position.

5. Balcony construction

The balcony should be constructed separately from the overall building, and in groups to ensure that the balcony is a self-contained assemblage of blocks that can be modified later.

After the model is completed, observe whether there are any errors in the whole, and if the changes can be changed in PHTOSHOP, then you can also use phtosho to fix the errors after converging the images.

Fourth, the material of the paste system:

Open "View" in the "Material Viewer", if we need to apply a material to the model, then we need to drop the material picture into our If we need to apply a material to a model, then we need to drop a picture of that material into our sketchup material library.

How to do this: Select the Create button in the Material Viewer dialog box. In the "Add Material Blend" dialog box, check the "Use Texture" box, and a "Select Image" dialog box will pop up automatically, where you can find the image of the material you want to apply. After you find the image of the material you want to apply, click "On", and then select "Add" command in the folder that pops up automatically. Close this dialog box, and the material you just added will be displayed in the "Model" of the "Material Viewer". Click the pattern of this material, and then click the model you want to attach the material to, the material will be attached to the model automatically. If you want to adjust the scale of the material displayed in the model, just click on the material in the model in the Material Viewer, and then in the dialog box that pops up, select the left/right and top/bottom Expansion Kits to the right of the "lock" symbol on the right side of the folder icon. In the dialog box that pops up, select the Right/Left Expansion Kit and Top/Bottom Expansion Kit commands to the right of the "Lock" symbol on the right side of the folder icon, and then enter the scale in the data area, and at the same time, while adjusting, you can see the change of the scale relationship of the material attached to the model.

V. Adding pages:

1. How to add pages: Choose "Pages" in the sketchup application, and click the "Add Page" command to add pages.

2. Select the appropriate angle perspective as a page (a picture). To create another perspective, you need to add a new page. For each page, if you make adjustments to the angle or shading to create a new effect, you should "page update" the page, otherwise the page will not store the corresponding changes in the page.

The Page Update command is a right-click on the page title, and a drop-down menu appears from which you can select the Update command.

The next step is to adjust the camera angle effect on the model.

VI. Setting the camera angle:

Steps:

1. First, deselect the Perspective Display option in View, so that the model view becomes the top view.

2. Select the Camera Position option in View, then select the camera position in the top view, click and hold the mouse to stretch it in the direction you are looking, and then release the mouse at this point, and the system will automatically produce the effect that the operator has set. After setting the effect, then enter the height of the line of sight (the height of the line of sight of a person standing is about 1650mm), select "Perspective Display" in the "View", the selected model will automatically appear in the set perspective effect, the end of the perspective modulation, followed by the shadows of the The next step is to set the shadows.

VII. Shadow settings:

1. Find the "Shadow" option in "View", click it and the "Sunlight and Shadow Options" dialog box will appear. The "Sunlight and Shadows Options" dialog box will appear. Check "Enable Shadows". Below the "Surface" and "Ground" options, the choices are based on the actual situation. We can check as many boxes as we want.

2. On the "date / time", we can according to the aesthetic needs of the shadow light to the appropriate adjustments, in short, the principle is to make the light hit the building to produce a good effect of light and shadow, for the building itself.

3. Regarding the adjustment of the relationship between light and dark, we can choose the following "Diffusion" and "Environment" options, stretching the slider to adjust the changes. (The toolbar for shadow settings is in View >> Tools >> Shadows)

Note: When you don't need a shadow effect on a building, it's best to leave the shadows in place. buildings, it is best to turn the shadow display off for faster execution.

Eight, sketchup remit to the image archive:

Select the title bar in the "file" & gt; & gt; remit & gt; & gt; image,

the system automatically pops up a dialog box (remit image), in the dialog box you can choose to remit their own image to be stored, as well as the type of archive to be stored In the dialog box, you can select the location where you want to store your exported images, as well as the type of file you want to store them in, and you can also select the "Options" button to choose the appropriate resolution and image quality in the "*** Export Images" dialog box that pops up, and then click the OK button.

Afterwards, tap Export, and the image will be automatically stored in the format you want.

Nine, image printing:

Right-click the image, select "Print with ACDSEED" option, the system will pop up the print dialog box, you can select the printer, click the "Properties" button, the printer properties dialog box will appear. The Printer Properties dialog box will appear, in which you can set the paper size and the direction of the preprinted image displayed on the paper. You can set the settings as needed, preview them, and print them.

X. Reminder:

When stretching the block, pay attention to always clear an unnecessary excess lines on the surface (in clearing the lines, pay attention to the line (or one of the model formation) must be entered into the corresponding component corresponding to the line before it can be edited, modified, deleted. You should also be careful not to remove any lines that may have a negative effect on the model, such as surface distortion). If a line is removed that will have a negative impact on the model, and it is an unwanted line in the overall model, you can hide the line in its own block so that it does not show up.

If the hidden E is a subcomponent (or something in a subcomponent) of a component, then after hiding it, if you want to display the component, you must also go to the corresponding component of the E to change the display. Otherwise, you will not be able to display the component.

What are the small and medium-sized architectural design firms in Suzhou

Suzhou Chengfa Architectural Design Institute Co.

Suzhou Xinyu Architectural Design Co.

Suzhou Jiucheng Urban Architectural Design Co.