The hotel's main large-scale equipment includes:

fire water supply system, fire alarm linkage system, air source (hot water supply), boiler (optional heating supply), central air conditioner (split air conditioner is also optional, but central air conditioner is recommended), elevator unit, radio and television signal group, front desk management system, room consistency system (optional), generator (or UPS power supply) and so on.

Hotel catering equipment:

1. Refrigeration equipment: Do not operate at high temperature > When used in a 38-degree environment, the compressor should be ventilated to dissipate heat, 81% of the items stored in the refrigerator should be the best, the cold air should be circulated, and the refrigerator should be kept warm from 1: 11 to 6: 11 to save electricity;

second, heating equipment: rice steamer and water boiler should always discharge pollutants to remove scale, and keep the electric heating tube with the best heating effect and power saving effect; Do not use groundwater; When the heating equipment is off duty, it is safe and energy-saving to turn off the power supply;

Third, the stove equipment: the fire is adjusted to 81% blue with white, the thermal efficiency is the highest, and the combustion is the most sufficient, mainly to adjust the ratio of gas and wind; In addition, it is necessary to regularly remove the carbon deposit in the furnace core, which has a good effect of saving energy and money;

four, food machinery: the power is large and small, so don't overload it. The multifunctional ones have different configurations and need to be replaced. Pay attention to the tightness of transmission system and belt, and add oil lubrication to gears and bearings;

5. During the installation and use of hotel equipment, first of all, we should pay attention to safety: there are many equipments and electrical appliances, and it is forbidden for liquids such as water or oil to invade the electrical appliances such as motors, switches, circuit boards and numerical control to prevent short circuit; High-power motor and heating pipe, wiring and switch configuration should be reliable, and voltage regulator and open-phase protection device should be installed; When installing liquefied gas stoves, try to use medium or high pressure valves as little as possible, which is easy to leak when the pressure is high.