Let's talk about an ordinary microcrystalline cabinet. The market price is about 1 100 yuan/linear meter. And this "microcrystalline board" refers to the material of cabinet door panels. A cabinet can't make several doors, and the upper cabinet can also make glass doors, and then the cost is very low.
As an agent, you might as well set up your own factory to sell. The cost is not much different.
Just found some information about cabinets, you can refer to it.
(1) cupboard
1, function
There are three kinds of cabinets: hanging cabinets, floor cabinets and special cabinets, and their functions include washing, cooking, cooking and storage. Cabinets are generally composed of countertops, door panels and cabinets.
① Hanging cabinets are mainly for storage, and there are some decorative cabinets, such as glass door cabinets, wine cabinets, hanging cabinet ends, round-headed sandwich cabinets, etc. Under the premise of meeting the storage function, the hanging cabinet has rich and colorful changes.
② The ground cabinets also have storage function, among which washing cabinets, kitchen cabinets and kitchen cabinets are necessary options. The washing cabinet and the kitchen cabinet are around the kitchen cabinet, and the top of the kitchen cabinet is facing the smoke cabinet.
③ Special cabinets are used to solve special problems in the kitchen. For example, the top of the high cabinet is flush with the upper edge of the hanging cabinet, and the high blue is installed inside, which can best hold things; Another example is the corner cabinet, which has a 270-degree hinge and a 360-degree rotating basket, and can make use of the dead zone of the corner.
(2) Desktop
1, artificial stone countertop
Artificial stone is a very popular countertop material at present, which can be divided into seamless and seam. Seamless artificial stone countertops are the most widely used materials in cabinets at present. The price of artificial stone is relatively high, and it has the properties of wear resistance, acid resistance, high temperature resistance, impact resistance, compression resistance, bending resistance and permeability resistance. Although artificial stone is resistant to high temperature, it can't directly put hot pot on it. You must use pot mats or pot racks. The quality of artificial stone varies widely. Because of its different processing technology, the quality is also divided into three or six grades. Inferior artificial stone is easy to seep, break and change color, and is not resistant to high temperature.
2, fire board mesa
The standard name of fireproof board is fireproof board. Fireproof boards are just people's idioms, but they are not really afraid of fire, but have certain fire resistance. Fire-proof board is made of fire-proof board as facing and particleboard as base material (density board is also useful), which is pressed and pasted in cabinet factory. Compared with melamine board, the processing of fireproof board is more troublesome. Many decoration teams and cabinet factories use some indigenous methods to press plates, and there is no special machine press plate, so the quality is difficult to guarantee. The veneer of fire-proof board is three layers, while the veneer of melamine board is only one layer, so the wear resistance, scratch resistance and high temperature resistance of general fire-proof board are better than melamine board. The fire-proof board is brightly colored, giving people a brand-new feeling. However, the fire board countertop is easily eroded by water and moisture, and improper use will lead to degumming, deformation, substrate expansion and other consequences.
3, stainless steel desktop
Stainless steel desktop is bright and clean, with excellent performance. Generally, a thin stainless steel plate is added to the surface of high-density fire-proof board. Stainless steel table top is firm, easy to clean and practical. For consumers who emphasize "practicality" or like metal texture, it makes sense to choose stainless steel countertops. However, the vision of stainless steel countertops is "hard", giving people a "cold" feeling, and all corners and joints of cabinet countertops lack reasonable and effective treatment methods.
4. Natural stone countertops
High-grade granite and marble in natural stone are the traditional raw materials of cabinet countertops, and black flowers and white flowers are commonly used. Natural stone has beautiful texture, hard texture, outstanding scratch resistance and good wear resistance. But the length of natural stone can't be too long, and it can't be made into a whole table. Two pieces of stitching can't fuse, and the gap is easy to breed bacteria. Natural stone has a high density and needs strong cabinet support. Although hard enough, it is not elastic enough. If it is violently hit, it will produce cracks and it is difficult to repair. Some invisible natural cracks will also break when the temperature changes sharply. Moreover, some natural stones may be radioactive and do not meet the requirements of environmental protection, which will do harm to people's health.
(3) Door panel
1, fireproof board
The standard name of fireproof board is fireproof board. Fireproof boards are just people's idioms, but they are not really afraid of fire, but have certain fire resistance. Fire-proof board is made of fire-proof board as facing and particleboard as base material (density board is also useful), which is pressed and pasted in cabinet factory. Compared with melamine board, the processing of fireproof board is more troublesome. Many decoration teams and cabinet factories use some indigenous methods to press plates, and there is no special machine press plate, so the quality is difficult to guarantee. The veneer of fire-proof board is three layers, while the veneer of melamine board is only one layer, so the wear resistance, scratch resistance and high temperature resistance of general fire-proof board are better than melamine board. The fire-proof board is brightly colored, giving people a brand-new feeling. However, the fire board countertop is easily eroded by water and moisture, and improper use will lead to degumming, deformation, substrate expansion and other consequences.
2. Melamine board
Melamine board is a fire-proof board attached to the surface of particleboard or density board with melamine, and its extended variety is that the edge is covered with metal frame. Similar to fireproof board, it has the properties of friction resistance, impact resistance, high temperature resistance, heat resistance, acid resistance and alkali resistance. Fireproof boards have various colors and lines that imitate nature, but there is no three-dimensional modeling. Adding metal edge sealing and aluminum alloy groove handle only increases its decoration, and has little effect from the actual effect.
Step 3 paint the board
Lacquer board is divided into baking paint and polyester paint. Baking paint consists of resin and additives, which can be polished. Polyester paint class adopts spray painting process, which needs no baking, matte surface and no polishing. What matters is firmness and adhesion. Good polyester paint falls off in the form of powder, and ordinary falls off in the form of fragments.
4. Solid wood board
Solid wood board is divided into pure solid wood board, solid wood composite board and solid wood veneer. Pure solid wood board requires high consistency of tree species, is natural as a whole, luxurious and classic, and has good effect; Solid wood composite board is based on solid wood splicing materials, and the surface is pasted with solid wood skin, which can achieve the visual effect of solid wood; Solid wood veneer is a double-glued solid wood veneer on the surface of medium density fiberboard. Solid wood composite board and solid wood veneer can avoid the color difference and defects of surface raw materials, achieve consistent texture and color effects, and are not easy to deform.
5. pvc plate (blister board)
PVC board can have three-dimensional modeling by vacuum pressing on the surface of substrate. Due to the integral coating, it has good waterproof and moisture-proof performance, and there are many colors and patterns to choose from. But the surface is easy to scratch and scratch, and it is not resistant to high temperature. Moreover, PVC plates are easy to deform, because the moisture in the glue will penetrate into the substrate during the gluing process.
6, crystal plate (plexiglass)
The crystal disk is made of plexiglass after the surface of the disk is painted. Because of its manual operation and the characteristics of plexiglass itself, it has many shortcomings.
7. Plastic frame plate
The plastic frame board is attached to the surface of the substrate with some plastic decorative bread. This material is mostly operated by hand. Beautiful at first, rich in color, easy to deform, fall off, distort and fade after a long time, and there are many clean dead angles.
(4) Cabinet body
1, distribution frame
The substrate of veneer is generally particleboard or density board, which is resistant to high temperature, hard texture, pressure and acid and alkali. Most cabinets are made of veneer.
2, stainless steel plate
Stainless steel plate is resistant to high temperature, acid and alkali, and can't be opened when there are pipes. The color is cold and hard, and the gap is easy to hide evil and shelter evil.
Step 3 choose
When consumers choose cabinets, they should first look at materials and hardware. Material is the main factor affecting the quality of cabinets, and the final quality results of different materials are also different. The quality of hardware also directly affects the service life of cabinets. Secondly, the workmanship of cabinets is equally important. Check whether the countertop, cabinet door, cabinet body and sealing strip have been molded by machine when purchasing, so that such products will not crack, blister or deform after long-term use, and the sealing strip will not be tightly closed, which may easily cause oil smoke, dust and insects to enter. At the same time, we should also ask whether the cabinet production is manual or assembly line. Generally speaking, the quality of manual or semi-mechanized products is unstable, and fully automated professional assembly line production can ensure the quality of cabinets. Although the slide rail of the drawer is a small detail, it is also an important part that affects the quality of the cabinet, because if there is an error in the size of the hole and the plate, the slide rail cannot be installed correctly, which will cause the drawer to be pulled left and right unsmooth or loose. In addition to materials and workmanship, we should pay attention to after-sales service. Consumers should ask the merchants about the warranty when ordering cabinets. General brand-name products are relatively guaranteed.
First of all, we should consider the storage space, environmental protection and ease of use of cabinets, followed by aesthetics. The storage space of the cupboard should be atmospheric, not too pocket-sized, so many things can't be put in. The environmental protection degree of cabinets directly affects human health, and some low-quality cabinets are not up to standard in environmental protection performance, releasing harmful gases. In addition, due to different places of origin, the quality of cabinet materials is very different even if they are the same material. In addition, fake and shoddy products are also common, such as melamine board as fire board and spray painting as baking paint. The samples are different from the delivery.
The choice of cabinets should be based on practicality. Before home improvement, the cabinet plan should be set and water and electricity equipment should be reserved. General designers will make several sets of cabinet plans, and consumers can make some changes on this basis to determine the cabinet plan. There is no need to rack one's brains to think too much, because designers are studying cabinets every day and have rich experience. In the choice of cabinet style, its height does not have to be uniform, for example, the kitchen table can be lower, the vegetable washing table can be higher and so on. Which is more delicious. However, due to the orientation limitation of various functions of the ground cabinet, the changes of the cabinet are mainly reflected in the hanging cabinet, with various styles and styles.
(5) Gas stove
1, function
According to the structure, gas stoves are divided into desktop, embedded and floor-standing gas stoves (with oven and disinfection cabinet, etc.). ). In contrast, the sales of floor-mounted gas stoves are small; According to the number of burners, there are monocular focus, binocular focus and multi-eye focus. The panel of the gas stove is made of glass, stainless steel and oil-free materials. Embedded gas stoves are more and more favored by consumers because of their simplicity, portability, high-grade and easy cleaning. According to the way of burning secondary air, embedded gas stoves can be divided into three types: "downward air intake", "upward air intake" and "backward air intake".
① downward air intake type
This kind of gas stove is based on foreign cookers. In order to meet the cooking habits of Chinese people, the heat load and burner are added. This kind of products abroad require the box to be perforated, or rely on the large gap on the box to supplement the secondary air needed for combustion, and also be used to exhaust the leaked gas (which is inevitable during ignition), so the design heat load is small. However, domestic users rarely know that the perforation of the cabinet leads to insufficient combustion, and the concentration of yellow flame and carbon monoxide is high (it is difficult to reach the national standard). Once the gas leakage is large, it may cause ignition deflagration and lead to the bursting of the glass panel.
② upwind type
In order to improve the shortcomings of the first gas stove, this gas stove raises the burner above the table, hoping that air will enter from the gap between the burner and the liquid bearing plate. However, when burning, this part has formed a high temperature zone, and the cold air expands and rises when heated, which makes the cold air of the gas stove with unreasonable design unable to enter the burner, and the secondary air cannot be effectively supplemented, which makes it difficult to solve the problems of high concentration of yellow flame and carbon monoxide. This structural design has low thermal efficiency, and the high burner greatly reduces the aesthetics of the gas stove, but it can reduce the bursting rate of the glass panel.
③ headwind type
This gas stove is equipped with an air inlet in the area where the panel temperature is relatively low. When the air in the shell is reduced due to combustion to form negative pressure, cold air will be sucked into the shell along the inlet of the air inlet, which not only provides sufficient primary air and secondary air for combustion, but also solves the problem of yellow flame and greatly reduces the concentration of carbon monoxide. Moreover, the leaked gas can also be discharged from the air inlet. Even if there is a gas leakage explosion, the air flow can be discharged from the air inlet as soon as possible, so as to quickly reduce the internal pressure and avoid the explosion. At the same time, cold air enters the furnace body through the air inlet, which also reduces the temperature of the table glass.
At present, embedded glass panel gas stoves are mostly the first two forms. If the product quality is not up to standard or improperly installed, it is more likely to cause insufficient combustion, excessive CO, yellow flame, high temperature of shell and panel, low firepower and glass explosion. Therefore, consumers must buy brand-name products in big shopping malls or reputable building materials cities.
The use of gas stoves involves every household, with high frequency of use and particularly high safety performance. Whether the quality of stoves is qualified will directly affect the safety of consumers' lives and property. According to national standards, gas cookers must meet two requirements: 1, and the concentration of carbon monoxide released by flue gas during combustion should be less than 0.05%; 2. Gas stoves must be equipped with flameout protection devices. Once the flameout occurs, the gas source can be automatically cut off within 20-30 seconds. Inferior cooking gas can not be fully burned, and its carbon monoxide gas release exceeds the standard, which will affect human health and seriously lead to death.
Step 2 choose
Pay attention to the following points when choosing a gas stove.
① Choose different types of cookers according to the overall design and use requirements of the kitchen.
(2) Although the gas stove is a low-tech product, it requires extremely high safety performance. It is necessary to purchase products from professional manufacturers with large production scale, which can ensure that the self-produced rate of spare parts can reach over 99%.
③ Igniter is the most critical component in the ignition system of table gas stove. The igniter with strong ignition and crisp sound ensures the success rate and service life of gas stove ignition.
④ Burner and distributor are the most critical components in the combustion system of table gas stove. Rust-proof burner and copper distributor can ensure the thermal efficiency of combustion and long service life.
⑤ No matter what kind of product it is, you should choose the product with flameout protection device, which can play the role of automatically stopping the gas when it is accidentally turned off. There are two ways of flameout protection: ion induction and thermocouple, among which ion induction has faster response.
6. The appearance of the gas stove should be beautiful and generous, and there should be no collision around the body. Some products made of cast iron, steel plate and other materials should be painted evenly and smoothly, and cannot blister or fall off. The overall structure of the gas stove should be stable and reliable, the stove surface should be smooth and flat, without obvious warping, and all parts should be firmly installed without looseness.
⑦ The installation positions of the switch knob, nozzle and ignition device of the gas stove must be accurate. During ventilation and ignition, the gas should be basically ignited every time (at least 8 times when starting 10), and the flame should burn all the fire holes within 4 seconds after ignition. When the electronic igniter is used for ignition, there should be no electric shock when the human body touches the metal part of the cooker. When the flame burns, it should be uniform, stable and blue, without yellow fire and red fire.
During the ignition test, you should also check whether the air door of the gas stove is convenient to adjust and whether the pot bracket is installed correctly.
Pet-name ruby check whether the gas stove is affixed with a sales license sign, and whether there is a certificate of approval, instructions and certification materials with technical parameters.