Grease in sewer pipes is a very common problem, which will not only lead to drainage problems, but also bring many other damages. The following is a detailed introduction to the problem of oil in the sewer pipe and its solution.

First of all, we should know how the oil in the sewer pipe is produced. Generally speaking, this problem is mainly caused by superficial activities. Humans will produce many different kinds of oil in the process of food processing. Because oil is insoluble in water, it is easy to be discharged into sewer pipes. If these oils are not treated in the pipeline, they will accumulate and slowly block the pipeline.

The following is how to solve the problem of oil pollution in sewage pipes:

1. Preventive measures

Prevention is more important than cure, so some preventive measures can be taken to avoid such problems before large-scale oil accumulation and consolidation of sewer pipes occur. After cleaning up the accumulated grease, you can try to install a filter at the drain to absorb the centrifugally precipitated grease, solids and other particles.

Clean by hand

Manual cleaning is a simple and effective method to solve the problem of oil accumulation. Compared with other methods, it does not need to use any chemicals. It should be noted that dense articles should not be thrown into the sewer pipe, so as to accurately clean up the grease accumulation.

3. Use biological starter

Biological starter is a natural way to clean sewer pipes, which uses human biological cells to decompose organic matter. Specially designed leaven can be used to treat sewage outfall, the period is about 5 to 7 days, and 44% to 565,438+0% of oil consolidation can be eliminated.

In short, the problem of sewer blockage is very common, especially in the accumulation of grease or fat. Everyone needs to keep clean at all times and clean regularly to prevent and solve this problem.