1. Select the installation location.
The installation position of ultrafiltration water purifier should be selected near the water source, such as kitchen or balcony. You should choose a wall with strong bearing capacity, horizontal, dry and ventilated, or a cabinet under the sink.
Connect the faucet
Connect the faucet equipped with the water inlet pipe with the water inlet pipe of the water purifier. Put the sealing ring on the water inlet pipe on the thread of the faucet, then screw on the water pipe and tighten it with a wrench to ensure no water leakage.
3. Install the front filter element
Remove the lower panel of the water purifier and install the front filter element in different positions in turn. Three filter elements are connected in parallel, and the sequence is (from left to right): PP cotton filter element, granular activated carbon filter element and compressed activated carbon filter element. Pay attention to put in different filter elements in order when installing.
4. Connect the water purification pipeline
Fix the pipeline at the water outlet of the water purifier with a clamp, and then connect the water outlet of the water purifier with a clamp. If necessary, you can measure the length of the pipe with a ruler and then cut the pipe with a cutter.
Turn on the water purifier
Turn on the faucet, adjust it to medium water flow, check whether the faucet is closely connected with the water purifier, then plug in the plug switch and turn on the power supply of the water purifier. The ultrafiltration water purifier was successfully installed.
In a word, the installation of ultrafiltration water purifier needs patience and care, and attention should be paid to choosing the appropriate location and connection method, correctly installing the front filter element, and finally opening the water purifier and checking the connection and power supply. If it is inconvenient or inexperienced, it is recommended to ask a professional water purifier installation company to install it.