Weekly Record of Internship 1
Weekly Record of Internship I have to sigh that time has passed quickly. This week, I got a new harvest, that is, I created a lot of my own firsts. I got on the computer for the first time. That was Tuesday. The little master was drilling, adjusted the knife and squeezed down the hole. My hands were itchy, so I went over and said, let me give it a try. Thanks to the school and the teacher for arranging the metalworking internship at school, so that I can get started quickly and understand the key points of work here. Push the knife out after pressing a certain distance, in order to get rid of the iron filings, and when drilling, press the drill bit down with one hand, and remember to add coolant to the hole with the other hand, a milky water-based coolant. It's the first time to borrow tools from the warehouse, because many tool sets are not fully equipped. Although borrowing is not for your own use, it is still very fulfilling, which may be a part of getting familiar with the environment. The harvest is not small.
Two weeks passed quickly, and one week passed. Here, our classmates first had a three-day pre-job training together. The contents of the training were as follows: 1. Basic information of the company, such as development history, number of employees, selling points of products and so on. 2. The basic system of the company, such as: working hours, off-duty hours, holidays, etc. 3. The company consists of several workshops: c1c2c3 Workshop b1b2b3 Workshop a1 Workshop d1 Workshop, etc. 4. Spare-time arrangements of the company, such as the latest movies being shown free of charge in the canteen on the second floor on the night of 135 every week. On the afternoon of the last day, I signed a labor contract with my company. I have also visited the place of work, and in a daze, a week has passed. A lot of things were said during the training, but one thing to remember is that this company was such a professional company in Asia XX years ago. Every workshop of the company is compared with small processing plants in other places, which may be a selling point of pride. It feels good.
Week 3 of Internship: This is the second week we have been here, and we have gradually become familiar with it, but we can only do some simple things at work. After all, we have just arrived here, and we will gradually get used to it after a long time. The company has its own set of personnel training policies, and the employees who just came in started from the provincial model. The work of saving mould is all hands-on, which is not hard. Generally speaking, the dissatisfaction is that it is tedious and monotonous. I sit in the provincial mould every day when I go to work, grinding and grinding on the mould parts with an oilstone in my hand. Because I am bored, I have to find some work for myself, but I can't leave my hands behind, so it's only the parts. This is the moving mould insert, this is the fixed mould insert, and this is exactly the same. One advantage of being in a professional mold factory is that you can come into contact with molds of different shapes, which is very attractive to the students who have just come out, especially when they are professional counterparts. Very excited.
The work of the four-system module of the internship weekly diary is much busier than that of the provincial module. Although I have been here for more than a week, I have basically not completed a task by myself. What I can do is to help, pass tools, move mold parts, and template die. I know a lot about the environment: the molding module is an independent small team, which is responsible for the processing and assembly of the whole set of molds independently. The group is equipped with four milling machines, two rough milling machines and two fine milling machines. It is the use of such equipment to complete machining work other than numerical control machining, such as drilling and transporting water holes, jacking pinholes, machining rough machining small inserts, etc. The team members are composed of an old master, that is, the team leader, an old worker who has worked for ten years, and this one is always on the length of service. Three superfine product who worked for two to four years, and a team member who worked six months before me. There may be a generation gap, but I talk to the youngest worker the most, and I know a lot about the tools standing behind him every day. One thing here is that the milling machine is called a lathe.
Week 5 of internship here is a new beginning, because I have been transferred from the boring provincial module to the sixth ancestor of modeling. It was Wednesday afternoon, and the workshop director suddenly appeared in front of me and asked me to put down my work and go with him. At first, I thought it was for me to do odd jobs, because I was a newcomer, and it was inevitable to be dragged out to do odd jobs such as sweeping the floor. I didn't expect him to take me to the front of the leader of the modeling team that I often see when I go to work at ordinary times, and told me that this is your leader, and you will work here in the future, and then walk away. The following content is somewhat formulaic, just like some accounts. What's the name? Where are the people? My name is Huizhou, so long as it doesn't concern privacy or secrets. What can I do when I first arrive? Spectator, that's it. Now look around, but what kind of work do you do? Get familiar with the working environment, where the tools for work are placed, get familiar with the team members and help them, such as passing the tools.
It's the third week since I came here. As it's my first month in the factory, I don't have to go to work on Saturday and work overtime at night. At least that's how the system in my workshop is implemented. Some students are not so lucky in the workshop, and they will go to work on Saturday the next week. At present, the work is still a provincial model, and there is no way. The system is set up like this. Only when the superior person leaves, the pawn below will go up, which is heartbreaking. This is the sad side of the wage earners. It's easy to save the mold, and it's all hands-on work. However, it's depressing that the work is repetitive. I repeat an action every day, which is too painful. Sometimes I feel like a machine, like a robot, moving to a certain distance and returning, well, just like that linear motor, doing this reciprocating motion that I think is the most regular. People in the workshop don't get along too badly, because they can't talk too much at work, and then they leave in a hurry after work, which is a bit of a failure, as if they only remember the team leader.
Week 7 of internship this week's work will be much more complicated and busier. I've been here for a month, for example, when drilling. Find your own drill and borrow it from the warehouse when you are too lazy to find it. Anyway, careful use will not wear it out and it will save much effort. I'm worried about the work here. The molds here should be cleaned before assembly, because the surface of the mold was coated with a layer of engine oil for rust prevention. According to the compatibility principle, the cleaning agent is a kind of natural water of organic matter, the main component of which is xylene, which is highly volatile, flammable, explosive and toxic, and is dangerous. Ethyl acetate, acetate, benzene, toluene, acetone, ethanol and butanol are made into a mixed solvent, which is called banana oil. Pure banana oil is a colorless, transparent and volatile liquid with a strong banana smell, slightly soluble in water, soluble in various organic solvents, flammable, and mainly used as a solvent and diluent for painting. Contact with such dangerous goods every day, will it be harmful to your health? It is worth considering.
What's the difference between the eight-system module and the provincial module? One thing is that the provincial module is sitting, while the modeling is standing. You can't sit while driving the machine, and you can't sit down when carrying ingredients. This week, I finished the work of clamping the workpiece and straightening it with the edge finder. At first, when I saw the guidance from my predecessors, I felt that there was no difficulty. I just knocked carefully on the Y axis while moving the X axis. What is the difficulty? When I was operating, I was a little embarrassed to say it. I wanted it to be perfect, so I came slowly. I knocked on the left and moved to the right of the X axis and then moved back. After more than an hour of dallying, I still didn't finish it. The little master couldn't stand it, so I ran over and gave a hand. It took ten minutes to get it done. Experience, this is a living example. Because of this blow, when I needed to straighten, I volunteered to embroider one. Now, I can finish it in five minutes, although others can finish it in three minutes. It's still pretty good.
Weekly Record of Internship 2
1: Weekly Record of Internship This week is the first week of my first internship, so basically all companies need us to know about themselves, so that I can integrate into the operation of this investment company more easily. As far as I know, an investment company is an investment company that can make money for the industry. Stock certificates? Hui? There are all kinds, and there are many businesses. In this week, I realized that the projects the company has done probably include these: industrial investment, venture capital, financing and wealth management, urban construction, business and education investment; And so on, many businesses. In fact, I think the main thing is urban construction, that is, real estate investment. This makes more money. After all, this is a listed company, so I feel honored to work here. However, I understand that the company can provide such good conditions for our students to practice, so we students should make great efforts here and try to learn more things that are not in our textbooks.
2. After a week's internship weekly diary, I found how little I learned in school, and the knowledge contained here is wider, which is a bit difficult for me as an intern who started as an account manager. Now I must master the emergence, development, structure and operation of the securities market, and master the main business and risk supervision of securities intermediaries. Fortunately, my basic knowledge is still ok, so I am proficient in securities and securities markets. I haven't considered doing the securities business before, so I haven't applied for the certificate in this field. Now I want to get in touch with the securities industry, so I have to resign myself to study. More and more, I feel that three years in college seems a bit wasteful. Without a good start for myself, a good plan is not enough.
Three: Weekly Notes on Internship In the past, people always complained that college students only had textbook knowledge but no practical ability, but in the case of stock trading, the situation was just the opposite. At present, there are more and more college students trading stocks, and the 21xx market has spawned a number of new student investors. They are either too busy to attend classes because of the hot market, or too lazy to attend classes because of short-term profiteering. The stock market has trained a group of students who have only practical ability but no book knowledge. For students, no matter how important practice is, it is not as important as classroom. No matter how important practice is, it is only a means to consolidate classroom knowledge, and classroom is the first choice to acquire knowledge. Hands-on ability without book knowledge is pseudo-ability, and the longer students practice in this impetuous market without theoretical guidance, the farther they will make mistakes.
four: weekly diary of internship this week, we started to get in touch with stocks. Originally, the difference between investing and stock trading was whether we used more brains or hands-on. It takes about two or three weeks to learn how to make an order, and then learn some technical analysis-that is, to face the stock, and then you can start tossing. It takes two or three years or even longer to learn investment. To weigh stocks and understand their value, you must master economics, accounting, financial analysis, money and banking, investment, statistics, etc. More importantly, you must be very familiar with at least one industry. The investors must be professionals, and there are no restrictions on stock trading, including amateurs and pseudo-professionals. No matter what happens, our account managers have to understand, because every customer has a very different concept of stocks, and we have to communicate with them often to better understand the needs of customers. To put it bluntly, we really feel like a salesman.
five: The weekly diary of internship is approaching the New Year, so we have put a little water on the progress of the training process. The main problem we are facing is the qualification examination in February. I have been studying the two books of securities basics and securities trading in the library these days. Reading books is good, which can help me slowly start to understand the operation of the securities market. In the securities market, bulls and bears change. No matter whether it is a bull market or a bear market, there is a kind of crazy power at the end. Such a market reminds people of the scene of tens of thousands of people waving red books and shouting slogans in unison-people can't think when they shout loudly. The risky investment in the stock market needs to be cautious. Seeing the red flag fluttering in a sea of people reminds us again and again that irrational enthusiasm is terrible, and it is a kind of powerful ignorance.
six: weekly diary of internship. I made a plan this week. After all, the opening time from the New Year to the year after is nearly three weeks, so I can't leave it here. So I wrote the following plan: I should make full and reasonable use of my time. If I can't concentrate, what can I do with more time? I usually review at night, because at that time, I am in the best condition and can read books best. My review method is: Step one, read through the chapters first. When a chapter is completed, read the teaching AIDS again and do the exercises. Mark the wrong questions to understand where they are, and then continue. At this time, you should spend more time to understand the contents of the book. The first time is to lay the foundation, and you can get used to it when you have laid the foundation. The second step is to read through, watch the teaching assistants do the questions, compare what they did wrong last time and this time, and mark all the wrong questions in the specific position in the textbook, which will help deepen the memory and focus on understanding. The third step is to repeat the first and second items. When you finally sprint, you can take out the questions you have done and browse them several times. In addition, you can learn about the next certificate every day. What about (18) health (5)? Living examples are often understood faster than reading a book. Remember to use highlighter or red pen for the key content. After reviewing many times, you can go straight to the key point. Multiple-choice questions are difficult, and each question scores one point, which often determines the success or failure of the exam. We must strengthen practice and pay attention to details.
VII: I haven't been idle during this period. Although I haven't worked as hard as before, I will still spare a few hours to study stocks and I have also started trading stocks. Generally, the investment is relatively small. I just want to satisfy my own speculation about the turbulence of the market, so I pay more attention to the changing rules of stocks. How to choose stocks is a very basic knowledge. Up to now, there are thousands of A-shares in Shanghai and Shenzhen stock markets in China. After ten years of ups and downs, investors have matured day by day. From the general rise and fall of early stocks to the present, they have completely bid farewell to the era of ups and downs. From the analysis of the market in the past two years, the proportion of stocks that have risen in each rising market is only about 1/2, and the stocks that have exceeded the broader market are even rarer. Even if many people judge the general trend correctly, they still cannot make profits because of the deviation of stock selection, which shows that stock selection is important to investors.
Eight: Weekly Notes on Internship My stock selection method has finally been summed up. I am a rookie, and I have little experience before, so I used the following methods to select stocks. The manager once told us that stocks are generally ok.