1. What is hydropower transformation?
Hydropower transformation refers to the transformation process of replacing all or part of the waterways and circuits used by the original developers according to the decoration configuration, family population, living habits and aesthetic concepts. The purpose is to make the hydropower equipment in future life safer, more convenient and more beautiful.
Second, five preparations before hydropower transformation
① Determine the specifications, dimensions and placement of indoor furniture and electrical appliances.
(2) Understand the daily use requirements of your indoor water circuit, including lighting, switches, sockets, wires, telephones, networks, stereos and waterway locations.
(3) If there is a shape ceiling lamp, you should think about the layout and control mode of the lamp.
④ Determine the heating mode of domestic hot water (water storage type, i.e. hot electric water heater, gas water heater or solar water heater). Large units should consider whether to make hot water ring system.
⑤ Whether pre-water, purified water, soft water and other water treatment equipment are installed in the waterway, and whether backwater equipment should be added to the hot water with long pipeline.
Third, the general process of hydropower transformation
Before hydropower transformation, it is best to have perfect hydropower construction drawings and construct according to the drawings to avoid workers deliberately winding.
1, circuit transformation process
The designer or project manager shall make disclosure to the owner at the site according to the drawings to confirm whether there are any missing items → finished product protection (finished products such as sewer, water meter and heating) → positioning circuit elastic line → cutting groove → removing groove (it is forbidden to destroy the ground in plumbing, electricity and other pipeline areas) → cleaning up the ground garbage → fixing the box → bending the pipe → fixing the pipe → threading → pulling the wire → backfilling → connecting the wire → connecting the box → testing and acceptance of strong and weak electricity (.
2. General process of waterway reconstruction
The designer or project manager shall make disclosure to the owner at the site according to the drawings to confirm whether there are any omissions → finished product protection (such as drainage pipe, water meter, heating, etc.). ) → locate the waterway elastic line → cut the groove → remove the groove → clean the ground garbage → punch holes on the top surface to fix the pipe clamp → weld the water pipe → fix the water pipe by pointing → insert the plug → test the elevation and the levelness of the outlet wall → suppress → conduct water test → backfill.
Four, hydropower transformation need to use materials
1, the fifth generation of new transparent environmental protection electrical bushing.
Famous Carving Decorates the newly developed fifth generation new transparent environmental protection electrical bushing, which adopts lead-free environmental protection bushing. The use of transparent casing can better supervise the internal wiring problem in the construction site, and the knotting problem of wires and bare copper wires can be found and solved in time in the transparent conduit. In addition, the transparent environmental protection electrical bushing has the characteristics of flame retardancy, no open flame and pressure resistance, which can protect the life safety of the workers of the design and decoration company to the maximum extent at the construction site, and can also protect the life safety of the owner to the maximum extent after the owner moves in.
2. Low-smoke halogen-free flame-retardant Class A wire
The low-smoke, halogen-free flame-retardant A-grade line used by famous sculptures is made of oxygen-free copper, which is smokeless and nontoxic, with high heat resistance, chemical resistance, radiation resistance and high safety factor. In addition, the appearance color of the wire is well divided, and the biggest feature is its strong toughness. It can protect the life safety of the owner and his family, and create a good living environment during use.
3. German imported terminals
In home improvement, the wiring of wires is definitely very important. In the current home improvement market, you may see soldering and insulating tape wrapping, but this kind of construction is easy to age and fall off. Therefore, there is another material in the list of home improvement hydropower materials-terminals. The famous carving adopts terminals imported from Germany, and nylon modified by flame retardant insulating materials has long service life, no corrosion, good aging resistance and good safety performance. Moreover, the spring clip technology is reliable and does not fall off, which solves the technical problem that soft and hard wires are difficult to connect. It can be said that it is a combination of safety and practicality. Decoration materials, as concealed works of hydropower, must be better selected.