Causes and solutions of gas stove fire being extinguished:

1. Battery is dead or poor contact.

You can fasten the battery and reinstall it to ensure that all contact surfaces of the battery are clean, and then fire to see the situation. If it is still off, you can replace the battery and try again.

2. thermal probe problem

look at the broken stove on the other side. Will the flame in the middle burn the probe? You must burn the detector to put out the fire. When there is still some time, you can hold it for ten seconds. When the switch is released, the probe is thermally sensitive. You must burn it to put out the fire.

3, thermocouple temperature is not enough.

don't release the solenoid valve through the small mechanism on the switch after the fire. When the thermocouple reaches a certain temperature, loosen it. It usually takes more than 31 seconds to one minute.