The bathroom ceiling is generally aluminum button plate ceiling, there are two ways to disassemble, one is to use the suction cups to suck, the second is to use a knife to pry, as follows:

1, prepare the suction cups. General home plush toys with small suction cups, as shown in the figure below.

2, the suction cups sucked in a corner of the aluminum buckle plate, as shown in the figure below.

3, force the suction cup down, the corner of the aluminum buckle plate will be up, as shown in the figure below.

4, in the same way, in turn, the other three corners of the aluminum buckle plate apart, so that a whole aluminum buckle plate is removed.

5, with a knife to dismantle. First of all, the knife will be aligned with the intersection of the four aluminum buckle plate point, the knife into the gap, as shown in the figure below.

6, pry hard to the inside, as shown below.

7, so that the aluminum buckle plate is followed by dismantling, hand pumping pumping, aluminum buckle plate in order to dismantle the completion.