5 model essays on signs and signs contract

With the increasing legal awareness of people, contracts are indispensable in many occasions, and signing contracts is one of the best ways to avoid disputes. What kind of contract have you seen? The following are five signs and signs contracts that I have compiled for you, for your reference, hoping to help friends in need.

logo and signboard contract 1

Party A:

Party B:

1. Introduction

On the premise of abiding by the Economic Contract Law of the People's Republic of China and the Regulations of the People's Republic of China on the Management of Construction and Installation Projects, Party A and Party B agree with each other in accordance with the relevant regulations, policies and regulations of the government on the management of advertising and decoration industry.

ii. engineering information

1. engineering address: party a is willing to hand over the signage project located in the city to party b

, and the specific information is as follows:

2. engineering category

3. engineering contracting form

this project adopts: the construction project within the contract price is subject to the budget submitted by party b, and it is settled by contract. The Quotation for Signboards and Light Boxes of Gongan Road Construction Bank submitted by Party B and the main material samples (boards) involved in the budget are reviewed by Party A and signed by Party A and Party B for approval.

the engineering change items and materials that occur in the construction process are not included in the lump sum project, and the method of settlement is the same as article 6. In the process of construction, projects not included in Party B's budget are involved, and Party A shall not require Party B to carry out the construction without issuing corresponding changes. The closing method is synchronized with the general contract payment.

IV. Project Price

According to the Quotation for Luminous Signs and Light Boxes of CCB, the contract price of this project is determined to be RMB after friendly negotiation between Party A and Party B: excluding the tax cost, RMB is uncontroversial.

if an out-of-contract visa occurs in the project, the out-of-contract change fee shall be settled within one week after the completion of the construction project according to the evidence such as the change order of decoration project instructed by Party A and the change application form submitted by Party B..

if party a does not agree with the change plan submitted by party b, party b shall not change it; The change order issued by Party A must be changed by Party B after meeting the conditions of time limit for a project, project cost and loss of purchased materials. If there are any additions or deletions in the construction, Party A shall notify Party B in written form, and the additions or deletions shall be decided by both parties through consultation. Without the Decoration Engineering Change Order Directed by Party A and the Change Application Form submitted by Party B, the construction party will not make any changes.

v. Time limit for a project

This project will end from. In case of project increase or decrease and material change during the construction period, the construction period will be postponed, and the cumulative power outage of 4 hours will be counted as one day. If Party A fails to pay on time, Party B can stop work, and the shutdown period will be postponed. And Party A and related supporting projects affect Party B's construction, the construction period shall be postponed.

VI. Payment of project funds

The project funds shall be paid in three installments.

Phase I: On the date of signing the contract, Party A shall pay Party B 31% of the total project price, namely RMB;

Phase II: After the project is completed, the employing unit will pay 65% of the total project price, namely RMB; Phase III: After the one-year warranty period expires, Party A shall pay 5% of the total project price, namely RMB;

VII. Person in charge of the construction site

Person in charge of Party A's construction site: Person in charge of Party A's finance:

Person in charge of Party B's project:

VIII. Warranty service of the project

8.1 The users of our company enjoy the quality problems caused by materials, construction technology and other reasons during the warranty period, and the company will provide 48-hour quick response on the premise of paying off all the project funds. The damage caused by man-made reasons will not be guaranteed, and if maintenance is needed, the company will charge an appropriate fee;

8.2 for the materials provided by party a, party b only undertakes the warranty responsibility for the construction part.

IX. Rights and obligations of Party A

9.1 Party A shall provide Party B with water and electricity facilities and a good construction environment, and the expenses of water and electricity for construction and living shall be borne by Party A;

9.2 party a is responsible for coordinating the relationship with other construction units and paying various management fees charged by the management department;

9.3 party a shall send a plenipotentiary to take charge of coordination, and all documents signed by the plenipotentiary sent by party a shall be recognized by party a;

9.4 according to the needs of the project, party a should send a representative to supervise and guide party b's work, and party b must accept the management of the project quality and progress of the representative sent by party a. All documents signed by Party A's representative will be recognized by Party A;

9.5 the plenipotentiary appointed by party a has the obligation to assist party b to ensure the smooth construction of the site. All materials and construction projects that need to be changed must be put forward by the authorized representative of Party A, and the Notice of Change of Party A's Instructions must be issued, which can only be changed after Party B signs it for approval, otherwise Party B will not change it. Where Party B proposes changes, Party B shall issue a Change Application Form to Party A, and the authorized representative of Party A shall be obliged to review and sign the changes of Party B..

X. rights and obligations of party b

11.1 party b's construction personnel shall earnestly safeguard the interests of party a and protect and take good care of party a's property at the construction site. Party A's house equipment shall not be damaged;

11.2 party b shall not use high-power electrical appliances for non-construction purposes (except domestic electricity) on the site;

11.3 party b must implement the relevant management regulations of the place where party a is located, care for the environment, pay attention to hygiene and maintain the company image;

11.4 pay attention to protect finished products, semi-finished products and raw materials to prevent bumps and scratches;

11

.5 Ensure that the construction work is solid, standardized and of excellent quality. In case of rework due to quality reasons, the rework fee shall be borne by Party B..

Xi. contract modification and termination

11.1 this contract, including the modification of contract annexes and material samples, requires the consent of both parties, and goes through the relevant modification procedures, and the contract and annexes are not allowed to be modified at will.

11.2 in the course of construction, if it is necessary to change the decoration project, the other party shall be notified one week in advance, and the relevant change procedures shall be handled. In case of increase or decrease of expenses, the construction period shall also be advanced or postponed. Party A shall not refuse to sign the Change Application Form for any reason, or refuse to issue the Notice of Party A's Instruction Change, and Party B has the right to suspend the construction and postpone the construction period.

11.3 in the course of construction, if the materials selected in the contract are replaced due to engineering needs or other reasons, it shall be approved by both parties, and the party requesting the replacement shall bear the expenses (transportation fee, handling fee, material return loss fee) and sign for approval.

11.4 after the contract is signed, if one party wants to terminate the contract, it shall pay the other party a penalty according to the contract price. If the contract is required to be terminated during the construction process, the contract termination formalities shall be handled according to the above agreement after the final accounts of the completed semi-finished and finished products are made.

11.5 the contract shall become invalid after the execution of the contract, the expiration of the warranty period and the settlement of the warranty fund.

XII. Other matters

12.1 Quotation for Signboards and Light Boxes of Gongan Road Construction Bank and the `material samples' submitted by Party B will serve as annexes to the contract, and both parties * * * will have the same legal effect as the original contract.

12.2 the notice of instruction change issued by party a, the change application form and the project completion acceptance form submitted by party b, which need to be confirmed by party a, shall have the same legal effect as the original contract after being signed by both parties.

12.3 within one week after the completion of the project, Party A shall organize the acceptance; if it is not accepted within the time limit, the project will be regarded as qualified; Party A shall pay the final payment of the project in the agreed way. If it cannot be paid after the deadline, the ownership shall belong to Party B, and Party A will pay 2% of the total project price to Party B as a daily penalty.

12.4 matters not covered in this contract shall be negotiated by both parties.

12.5 this agreement is made in duplicate, one for party a and one for party b.

XIII. Countersignature

Party A: Party B: Address: Address: Telephone: Signature of Representative: Bank of Deposit: Bank of Deposit: Account Number: Account Number: Signboard Contract 2

Entrusting Party: (hereinafter referred to as Party A)

Trustee: (hereinafter referred to as Party B)

Party A and Party B make clear their respective In accordance with the Contract Law of the People's Republic of China, the Advertising Law of the People's Republic of China, the Regulations on the Contract of Construction and Installation Projects and other laws and regulations, the following agreement is reached on the matter that Party A entrusts Party B to install the parking garage and outdoor guide system in the base of China Petroleum Joint Production Command Center:

1. Production content and requirements

1.1 Party A entrusts Party B according to the provisions of this contract.

1.2 for specific specifications, quantity and frame materials, please refer to the contents determined in Appendix 1, Contents and Quotation of sign production for Parking Garage and Outdoor Guide System;

1.3 party b must ensure the quality when making and installing the identification signs, and the warranty period is three years (if the product is damaged due to human factors or force majeure, it is not covered by the warranty). Party B shall handle it within 72 hours after receiving the notice;

1.4 installation location: Urumqi, Xinjiang;

II. Project cost and payment method

2.1 The total cost of production, installation and maintenance of this project is RMB one hundred and sixty-three thousand nine hundred and thirty-eight Yuan only (￥1 yuan);

2.2 after the signing of the contract, Party B shall provide the full invoice of the contract, and Party A shall pay 51% of the advance payment of Party B's total project amount within five working days after receiving the invoice, that is, RMB eight hundred and eleven thousand nine hundred and sixty-nine Yuan only (￥);

2.3 after party b's finished products are qualified after acceptance by party a, party a shall pay party b 41% of the total project amount, i.e. RMB sixty-five thousand Wu Bai seven hundred and fifty-two yuan only (￥);

2.4 after the installation is completed and accepted by party a, party a shall pay party b 11% of the project balance, which is

RMB sixteen thousand three hundred and ninety-three yuan and eighty cents only.

2.5 party a shall pay party b by transfer or telegraphic transfer.

III. Time limit for project production and installation

3.1 Complete the items specified in the contract within 25 days from the date of signing the contract. In case of force majeure (such as rain, snow, gale above Grade 4), the construction period will be postponed;

3.2 if party b's work cannot be completed on time due to party a's repeated amendments, the extension time can be determined by both parties through consultation;

IV. Rights and obligations of both parties

4.1 Rights and obligations of Party A

4.1.1 Handling the necessary approval procedures and related expenses for the setting and installation of identification signs;

4.1.2 have the right to put forward suggestions and amendments to Party B's manufacture and installation. Have the obligation to provide information of relevant units or other relevant information for Party B's reference;

4.1.3 provide party b with the location of identification signs and ensure that there is no pipeline line in this location and it can be constructed;

4.1.4 settle the manufacturing and installation expenses of identification signs according to the provisions of this contract;

4.1.5 party a shall coordinate all matters on the site of party b during the installation process, and shall not cause the loss of slowdown and shutdown of party B .. If the circumstances are serious, Party B has the right to claim the lost time from Party B;

4.1.6 in the process of production, installation and maintenance of party b, in case of any safety problems such as staff injury or illness, party a will not bear any responsibility, and party b shall bear all the responsibilities;

4.2 Rights and obligations of Party B

4.2.1 After Party A notifies that the site construction can be carried out, the construction and installation shall be completed within the specified time according to the installation location provided by Party A;

4.2.2 make and install in strict accordance with the construction plan drawings confirmed by party a .. If the site conditions are inconsistent with the construction drawing scheme, communicate in time and negotiate with Party A to modify the scheme;

4.2.3 in the process of production and installation, Party B should not only ensure the production quality, but also ensure that the products provided to Party A meet the specified quality and accept Party A's opinions and suggestions;

4.2.4 complete relevant work in time according to the time specified in this contract and the requirements of party a;

4.2.5 in case of problems caused by Party B's manufacturing and installation errors, Party B is responsible for making modifications in the design and manufacture, and the expenses shall be borne by Party B;

V. Liability for breach of contract:

5.1 If Party A fails to implement the payment method under this contract, it shall pay liquidated damages to Party B and postpone the contract period for every day overdue.

5.2 if party b fails to make and install identification signs on time according to the provisions of this contract without justifiable reasons, party b shall pay 1.5% of the total contract price to party a as liquidated damages for each day overdue;

5.3 party b shall ensure that the project quality, structural firmness, wind resistance and other indicators meet the national standards. If it is not up to standard, Party B shall bear the corresponding losses of rework and rework, and bear all the consequences caused by the quality problems of production and installation;

5.4 if it is due to party a's reasons, party a shall be responsible for stopping work, stopping construction and dismantling. Party B has the right to ask Party A to pay part or all of the production fees according to the actual construction situation;

5.5 if the contract cannot be fulfilled due to party b's reasons, party b shall compensate party a for the losses according to the actual situation;

5.6 after all production and installation are completed, party b shall apply to party a for acceptance in writing, and party a must organize formal acceptance within five working days after receiving the application. If Party A fails to organize the acceptance within five working days after the completion, Party B may regard the acceptance of the project as qualified;

VI. Effectiveness and Termination of the Contract

6.1 This Contract shall come into effect after Party A and Party B affix the official seal of the unit as a legal person, and the legal representative or the authorized agent of the legal representative signs (seals).

6.2 when party a and party b need to change or terminate this contract for any reason, they shall notify the other party in advance, reach an agreement on the remaining issues in this contract, explain them in the supplementary terms or sign a supplementary agreement. Before an agreement is reached, this contract shall remain valid.

VII. Other terms

7.1 Matters not covered in this contract shall be determined by both parties through consultation and a written agreement shall be made as an annex to this contract;

7.2 in case of any dispute during the performance of this contract, both parties shall settle it through negotiation, and any dispute shall be under the jurisdiction of the court where Party A is located;

7.3 this contract is made in quadruplicate, two for party a and two for party b, with the same legal effect. This contract shall come into effect as of the date of signature and seal.

party a:

agent (signature):

tel:

date of 21 years

party b: agent (signature)