coffee shop bar design: 1. coffee shop bar design type 1. linear bar: this is the most common coffee shop bar, generally closed at both ends, which can protrude into the room or be recessed into one end of the room.

there is usually no fixed size, depending on the number of service personnel. Generally, the maximum length that a service personnel can effectively control is 3 meters; 2.U-shaped bar: This type of coffee bar is less common than the first one.

In design, more than three working points are arranged, both ends of which are against the wall, and an island-shaped storage room is set in the middle of the bar to store the guests' supplies; 3. Square bar: There is an "island" in the middle of this middle bar for staff to make and store things, which provides a relatively large space for guests, but the number of waiters can be appropriately increased to ensure that the surroundings are within the effective service area of waiters.

Second, the design points of the coffee bar 1. It is best to use wear-resistant materials for the countertops of the coffee bar. Generally, the coffee bar is equipped with a sink. If you want to install a bar with a sink, it is best to use a material that is resistant to water. If the bar uses electrical appliances, artificial stone, melamine board, stone and other refractory materials are the best.

It's best not to save the use of veneer materials for the sake of drawing. Workers often work on the bar, which will damage the countertop and affect the appearance; 2. The lighting design of each area of the coffee shop is very important for creating the atmosphere. The coffee shop can be divided into three parts according to the area, and each part needs different brightness.

The bar belongs to the working area, and the light should not be too dim. If you want to match the overall atmosphere, you can install warmer lighting on the ceiling to match the overall leisure and romantic atmosphere of the coffee shop. 3. If you want to use electrical appliances with high power consumption in the bar, such as induction cooker, it is best to design a separate circuit to avoid circuit tripping.