Regarding the installation height of the dining room chandelier, its lowest point should not be less than 2.2 meters from the ground. This height will not affect the light and will not touch people. The types of restaurant chandeliers are also diverse. You can refer to the following:
(1) European candlestick chandelier European classical style chandelier, inspired by ancient people's candlestick lighting, when people put a few candles on the hanging wrought iron. Nowadays, many chandeliers are designed in this way, only the candles are replaced by light bulbs, but the light bulbs and lampholders are still like candles and candlesticks.
There are several types of crystal chandeliers: rock crystal cutting chandeliers, heavy lead crystal blow-molded chandeliers and low lead crystal blow-molded chandeliers; Crystal glass mid-range modeling chandelier, crystal glass chandelier, crystal glass die-casting cutting modeling chandelier, crystal glass strip chandelier, etc.
Now the chandelier is no longer a single lighting device, but has become an indoor decorative product. A chandelier with different styles can add a lot of luster to the home space, reflecting the temperament and taste of the owner of the house. So how should the chandelier be installed? Let's take a look at the correct installation method of the chandelier.
Installation method 1:
1, material preparation:
(1) Building materials: The following materials are commonly used. (1) The supporting members are mainly made of wood (square wood, square wood and water plank with different specifications), aluminum alloy (plate and profile) and steel (section steel, flat steel and steel plate). ② Use plastic, plexiglass and glass as spacers, and use external decorative veneers, radiating plates and copper plates. Anodized aluminum oxide plates are used as decorative parts. ③ Other accessories such as screws, nails, rivets, finished lamps, adhesives, etc.
(2) Construction tools: pliers, screwdriver, hammer, chainsaw, electric hammer, manual, ruler, paint brush, etc.
2, operation steps:
(1) First, choose the location where the chandelier is installed and avoid the hidden wires buried in the chandelier or ceiling.
(2) In the structural layer, iron pieces or wooden bricks are embedded, and the embedding position should be accurate, and there should be enough room for adjustment.
(3) Set transition connectors on iron pieces and wooden bricks, so as to adjust the error of the blocks, and nail, weld and screw the blocks.
(4) The suspenders and slings are connected by transitional connectors.
3. Installation precautions:
If there are multiple chandeliers during installation, pay attention to their position and length relationship. The chandelier can be installed at the same time as the ceiling, so that the position and height of the lamp can be adjusted according to the ceiling joists. The hanging rod can be directly pulled out from the ceiling and sheathed. The method of adding pipes is beneficial to installation, which can ensure the integrity of ceiling board, and only drill holes where pipes need to be placed. The hanging cup directly out of the ceiling is not easy to align when installing. Sometimes the suspenders can be installed first, and then the panels can be cut off to dig holes, but it has an impact on the decorative effect. Derrick should have a certain length of thread for height adjustment. Pay attention to the reliability of the connection when hanging the light box under the sling boom.
Installation method 2:
1, material preparation
Construction tools: pliers, screwdriver, hammer, electric drill, construction materials: screws, expansion screws, back strips, etc.
2, operation steps:
① Remove the hanging board from the ceiling, align it with the empty hole in the west piece, and choose a suitable position. If the empty holes are not aligned, pay attention to the position of the adjustment screw.
(2) Then, according to the installation strip, find the position that needs to be drilled on the ceiling, start drilling, select a drill bit with appropriate size, and drill a 6mm hole on the ceiling by electric rotation.
③ Screw the expansion bolt into the hole in the ceiling. You can hammer the bolt into the hole and then fix the hanging plate on the ceiling.
(4) Connect and fix the lamp board, turn off the power supply, connect the wire with the lamp wire, wrap the adhesive tape, and then fix the lamp board on the back strip.
⑤ Install the bulb on the lamp board, take it out and screw it on the lamp board carefully. After each light bulb is installed, remember to turn on the light to ensure the normal use of the lamps.
⑥ Install relevant accessories according to the instructions, take out the parts in the box, assemble and install them according to the drawings, and hang the accessories together. Crystal chandeliers have different accessories according to their styles, some only have light bulbs, and some also include crystal balls, crystal bars, bead chains and other accessories. After all the hanging, check whether the accessories are complete and hanging properly to ensure safety, and then turn on the crystal chandelier to see the effect.