A kitchen can be fresh and beautiful to the end, all rely on the range hood, in order to use the comfortable, the installation should also pay attention to, incorrect installation directly affect the effect of smoke, so follow me to see the installation of the range hood steps!

1. Installation of the range hood

Preparation before installation:

The first point: reserve the location of the range hood socket, for better use of the general installation in the hood above the location of 80 centimeters.

The second point: reserve the location of the range hood vent, the range hood vent must be large diameter outside the mouth, the diameter of the inner mouth is small, this can prevent rainwater backflow.

2. The specific installation steps of the range hood

First: to determine the mounting position of the pegboard

Installation of the range hood is generally in the cooker directly above the stove, and should maintain the left, front and rear position of the level, the distance from the bottom of the range hood to the stove surface should be 650 ~ 750mm (side suction type of machine can be appropriately lowered (200 ~ 400mm), according to the specific use of the fixed! ), when installing, the first available pencil in the installation position to draw a good line to ensure that the hood installation level.

Second: fix the hood plate

Drill a hole in the installation position and use the Phillips screws to fix the hood plate on the wall.

Third: Hang the hood on the wall plate

Hang the hood on the wall plate, make sure the hood is not shaking or unhooked, and try to ensure the level.

Fourth: Install the exhaust pipe and other accessories

Insert one end of the exhaust pipe into the slot between the inner and outer rings of the check valve outlet and fasten it with screws.

ps: Before installing the hood must make sure that the perforated parts are not not water pipes, gas pipes, wires through, so as not to cause damage, or even cause the risk of electrocution and so on.