How to draw 111 points in p>CAD elevation

The elevation is to look at your building from the side. First, draw the line of plus or minus 1.11, then determine that the length of your house elevation is the distance between the outer lines of two outer walls, determine the position of the inner wall, and draw the positioning perimeter of the wall; Then determine the height and draw the axis of the height; Then, based on these data, you can determine the position of your doors and windows, and draw the elevation of the doors and windows. Because it is cad, you have to draw the doors and windows line by line, which is very troublesome. If you can use Tianzheng Building, it will be much simpler. After determining the insertion point, just insert the elevation of the doors and windows directly. It is very simple. If it is drawn by cad, Tianzheng Building will definitely open, but it will be drawn by Tianzheng Building. On the computer without Tianzheng building, some blocks drawn by Tianzheng building can't be opened

How to draw the elevation

Draw the elevation according to the plane, and then adjust the elevation effect according to the renderings, and the renderings are the best. We usually draw the facade first and then make the renderings for the renderings company. Some companies also do renderings directly for the renderings company

How to draw the CAD elevation. . . 5 points

How to draw it, because all lines are thin lines, and then the outline of the building is thicker, and the outline of the building in front is thicker. Look at two cad elevations on the Internet and you will know how to draw them.

How to draw the elevation in architectural design?

Draw the elevation according to the plane, and then make corresponding elevation effect adjustment according to the renderings. The renderings are the best. We usually draw the facade first and then make the renderings for the renderings company. Some companies also make renderings directly for renderings companies

How to draw a good elevation?

first, it should be stable with the plane, such as the position of doors and windows.

Secondly, the styles of parapet and window sill need to be accumulated continuously, and you can also refer to other people's works.

Third, decorations, common lines, patterns and so on.

fourth, the overall effect, which requires aesthetic knowledge. Basically meet the symmetry, harmony and continuity.

how to draw the CAD elevation of interior design?

First of all, you should draw the floor plan well.

Look at how to draw the elevation plan. 11 points

You can see the length and other things on the floor plan, and you can determine the height of each floor by looking at the model of the window.

How can a novice draw a good construction drawing?

Some people say that drawing a building construction drawing is something that an idiot can do, but if you don't pay attention to the details, it may even be worse than an idiot. Give this article to the novice of architectural construction drawing. 1. The first step in structural design of building construction drawing is to understand the building construction drawing. Architectural specialty is the leader of the whole building design, and there is no other specialty of architectural design, so it is particularly important to understand the building construction drawing. Generally, the construction drawing includes the following parts: drawing catalogue, door and window table, general description of architectural design, floor plan from the first floor to the roof, front elevation, back elevation, east elevation, west elevation, section (depending on the situation, there are multiple), node details, door and window details, and stair details (depending on the function, there may be multiple stairs and elevators). As a structural designer, we must carefully organize the architectural drawings. If we don't understand them, we need to ask other majors involved in architecture and architectural drawings to build them, so as to be absolutely clear about the design concept and intention of the building. 2. The drawing catalogue and the door and window table drawing catalogue are the catalogues to understand the overall situation of the whole building design, from which we can know the number of drawings, the drawing size and the project number, as well as the main functions of the construction unit and the whole building. If there is any discrepancy between the drawing catalogue and the actual drawings, we must check the situation with the building. Door and window tables are familiar to everyone, that is, door and window numbers, door and window sizes and practices, which are essential for everyone to calculate loads in the structure. 3. General Description of Architectural Design The general description of architectural design is very important for structural design, because it will mention many practices and many data to be used in structural design, such as: the location of the building (used in the structure to determine the fortification degree and wind-borne snow load), the elevation of the Yellow Sea (used to calculate the foundation size and the elevation of the buried pile top, etc., without which it is impossible to construct in construction), the wall method, the ground method and the floor method ... and so on (used to determine various parts) 4. Building plan The building plan is more intuitive. The main information is the layout of the column network, the layout of the functional walls of each floor, the layout of doors and windows, and the location of stairs. The first floor plan is not needed in the modeling of the upper structure (except for the overhead floor and basement), and the first floor plan is used in the foundation. As for how to really do the structural design, this paper will not elaborate, but only talk about how to look at the construction drawing. As a structural designer, while looking at the floor plan, we need to consider whether the column network layout of the building is reasonable. If it is inappropriate, we should give reasons to persuade the building to modify it. Usually, it will not affect the modification of the building function and use effect, and the building will also agree to modify it. If the building does not change, we will only have to cry and look at the plan (people are the boss, there is no way ...), look at the building plan, and understand the functions of each part of the building. Basically, the value of the structural live load will be roughly valuable. Understand the layout of column network and wall doors and windows, the size of column section, the height of beam and the layout of beam are almost there. Anyway, there must be a beam under the wall. Unless it is a partition provided by Party A, it is best to stand on the beam. It is worth mentioning that pay attention to the roof plan. Usually, modern buildings have a layered framework for the effect of the facade, which is usually complicated. It is necessary to carefully understand the concept of the building and consult the building or ask for the renderings when necessary. Strive to make yourself understand what the three-dimensional formation of the whole frame looks like, so that you won't make mistakes ... In addition, you need to know clearly whether the level is structural slope finding or architectural slope finding. 5. Architectural elevation is a description of the architectural elevation, mainly the appearance effect, and the information provided to the architect, mainly the elevation layout and elevation layout of doors and windows, as well as the elevation decoration materials and concave-convex changes. Usually, the wired place is the change of surface, and then the height and other information, which is also the data that plays a role in determining the structural load. 6. The function of the building section plan is to cut the part that can't be clearly expressed in the plan and elevation to express the treatment of the interior of the building by the architect. The structural engineer can get more accurate height information and local height changes in the section, and the section information directly determines the sinking or lifting of the beam at the cutting position relative to the floor elevation, or staggered beams, sandwich beams, short columns, etc. At the same time, there is a clear concept of whether the frame beam acts as a lintel or whether another lintel is needed. 7. Details of nodes and details of doors and windows In order to express the practices of various parts of the building more clearly, so that the construction personnel can understand their own design intentions, it is necessary to draw details of nodes with complex structures to explain the detailed practices, not only through knots ... > >

how to draw the elevation of architectural design?

I wonder which direction of the arc the landlord refers to? The following methods are provided for your reference:

hand-painted elevation, compasses for regular arcs, and curved boards for irregular arcs.

if you want to draw the feeling of an arc on a curved wall, you can use the method of halo removal.

if the facade is complicated, the landlord can draw the facade (CAD or Sketchup) by computer, print it out, and then print it on the front drawing.

Appropriate shadows and trees can make the facade look better!

How to draw a cylindrical building elevation

In the scheme stage, orthographic drawings are usually drawn, and the drawings are just beautiful; The construction drawing should be expanded to facilitate the actual dimension marking and construction.