Before decomposing the gas stove, the decomposing tools should be prepared. The decomposition stage is not complicated. You can prepare a screwdriver in advance. There are screws on ordinary gas stoves. You must unscrew the upper screw first, and then remove the screw. It's easy to remove the gas stove. After removal, you can check the condition of the gas stove first. This should be repaired in combination with the problem of gas stove. There are also some gas stoves that are directly fixed with sealant. Therefore, it is necessary to use tools to separate the sealant first, so as to slowly remove the periphery of the gas stove.

to disassemble and repair the gas stove, firstly, remove the cooktop of the gas stove, and then use tools to disassemble the panel of the gas stove. Generally speaking, the panel on the gas stove is made of glass, so be careful when handling the gas stove panel. The most common problem on gas stoves is the stove problem. There are several screws on each stove. Before disassembling the stove, remove this screw first, and then slowly remove the lid, easel and ignition needle of the gas stove. The maintenance of gas stoves is best left to experts to solve. Please don't break it down by yourself. When we need to replace the gas stove, or when the gas stove breaks down and needs to be repaired, we should separate the gas stove.

how to disassemble the gas stove? Remove the screws that secure the panel, and then remove the control handle. The handle of the control panel is friction fit and can be pulled out directly. Some handles have fastening screws on the base. You can use a screwdriver or a universal wrench to remove the screws, then pull the handle and twist the screw set at the edge of the control panel to remove the service panel on the back of the panel. If the stove and the countertop are flat, then the stove can open the cupboard door below, hold it by hand and lift it down gently. If the trachea is uncomfortable, you can pull out the trachea before operation. Finally, for the sake of safety, no matter what method is used, it must be done after cutting off the natural gas source.

you can put some oil on it or knock it with a wooden block, and knocking the wooden block will not easily deform the gas stove. It is recommended not to touch the air leakage casually, which is very difficult. The reason for this phenomenon is that it burns and burns to death for a long time, so it is difficult to fall. The ignition switch is an ignition channel and a combustion channel. You need to block the combustion channel for this phenomenon. Please use 6 mm steel bar, spot weld with T-welding machine, and slowly screw it onto the screw to be removed, so as to ensure that the screw can continue to be removed. If the screw can't be loosened, drill the screw by hand and unscrew the fire cover. Twist it slowly, don't twist it. Aluminum plates are prone to distortion. I really can't. It is recommended to find professional staff of the maintenance company to handle it.