Do it when the next 29 o'clock is ready!
Minister of environmental protection talks about environmental supervision: 20 17 environmental protection is no joke, and the overall pattern of environmental supervision at the central and provincial levels has been formed.
On April 5, the Ministry of Environmental Protection held a video conference on intensified supervision of air pollution prevention and control.
On April 6, the first phase of intensive supervision training on air pollution prevention and control in Beijing, Tianjin and Hebei and surrounding areas was held in Beijing.
On April 7, 224 people who participated in the first round of intensive supervision on air pollution prevention and control will go to "2+26" cities to carry out comprehensive and intensive supervision. ...
In just three days, the environmental supervision work was put in place from the beginning of the meeting, which is the largest action directly organized at the national level in history.
Driven by the central supervision effect, at present, 2 1 provinces and cities in China have issued documents on the division of responsibilities for environmental protection. 24 provinces and cities have introduced environmental protection supervision programs. The promulgation of these documents has compacted the environmental responsibilities of local governments at all levels, and the overall pattern of central and provincial environmental supervision has been formed.
In 20 17, the central environmental protection inspector group will cover all the remaining 15 provinces and cities, including Hunan, Xinjiang, Tibet, Guizhou, Anhui, Sichuan, Shanxi, Shandong, Tianjin, Hainan, Liaoning, Jilin, Zhejiang, Shanghai and Fujian.
A new round of environmental protection inspectors is about to begin. Enterprises need to know: what do environmental inspectors mainly check at the enterprise site?
The Ministry of Environmental Protection reminds: If the following 29 points are not done well, you will never want to start work!
First, what does the environmental inspection generally check?
According to the speeches of the relevant leaders of the Inspector Group, the focus of environmental protection inspectors is to urge the provincial party committee and government to implement the national environmental protection decision-making, solve outstanding environmental problems, implement the main responsibility of environmental protection, promote the construction of ecological civilization and environmental protection in Guangdong Province, and promote green development.
1, focusing on outstanding environmental problems that are highly concerned by the central government, strongly reflected by the masses and have a bad social impact and their handling;
2, focus on the inspection of regional watershed environmental quality deterioration trend and remediation;
3, focusing on the supervision of local party committees, governments and their relevant departments environmental inaction, chaos as the situation;
4, focus on understanding the local implementation of environmental protection, party and government responsibility, strict accountability, etc.
Second, what will the local inspection check?
If an enterprise has one of the following problems, it will be fined, shut down, ordered to rectify, interviewed, etc. Please check for yourself!
1. powder and related accessories from coal-fired boilers shall be sealed while producing accessories;
2. Products with noise and strong smell should also be rectified;
3. Without a business license, non-standard manufacturers need to rectify;
4, by the way, check the existing fire safety hazards;
5, by the way, check fake and fake imitation cards.
6. Stealing waste water;
7. Discharge irritating gases such as paint smell;
8. Low frequency noise or excessive noise;
9. Dust pollution;
10, the EIA was not publicized;
1 1, and there is no environmental approval procedure;
12, there are hidden dangers in the operation of the motor unit;
13, illegal construction;
14, set up concealed pipes to discharge sewage without permission;
15, cinders everywhere;
16, there is a problem with digging and burying paper residue;
17, no wastewater recovery system;
18, the water intake permit was not handled;
19, no bright business;
20. Other wastes are stored in ponds without anti-leakage measures;
2 1, the problem of poor pollution control facilities;
22, smoke emission concentration exceeds the standard;
23. The garbage accumulated in the factory was not handled in time;
24, did not go through the formalities for examination and approval of environmental impact assessment documents;
25, pollution control facilities without the acceptance of the environmental protection department;
26, sewage permit expired;
27. Illegal production;
28. The COD of the filter exceeds the standard;
29. No sewage permit.
What is the main inspection of environmental protection supervision and law enforcement on the enterprise site?
Eight aspects!
I. Rights of environmental inspectors
When carrying out on-site inspection, there shall be no less than two environmental monitoring personnel engaged in on-site law enforcement, and they shall produce the "China Environmental Monitoring Law Enforcement Certificate" and other administrative law enforcement certificates to identify themselves and explain law enforcement matters.
Environmental monitoring personnel have the following rights:
(a) to enter the relevant places for investigation, sampling, monitoring, photographing, recording, video recording and making notes;
(two) to consult and copy the relevant information;
(three) to meet and ask the relevant personnel, explain the relevant matters and provide relevant materials;
(four) ordered to stop or correct the illegal act;
(5) Applying the summary procedure of administrative punishment and making a decision on administrative punishment on the spot;
(six) other measures stipulated by laws, regulations and rules.
Enterprises should remember: no violence against the law, no enforcement, no cooperation with the supervisor. Otherwise, the consequences will be serious.
Second, environmental monitoring generally checks the content.
1, enterprise production situation
A. Industry and main products of the enterprise
B last month's products and production capacity, and whether each line is in operation.
2. The implementation of enterprise environmental protection
A. Whether the project performs the EIA procedures according to law, and check the EIA documents and EIA approval, etc.
B. Check whether the nature, production scale, site selection, production process or pollution control measures of the project are consistent with the EIA and approval documents. If the project starts construction five years after the EIA approval, whether to resubmit the EIA.
C. Check whether the environmental protection completion acceptance has been carried out after the project is put into production. Whether the environmental protection completion acceptance procedures are complete.
D. Production workshop: whether the workshop floor exceeding the standard or raw materials involving corrosive substances such as acid and alkali is treated with anti-corrosion and maintained regularly. Whether there is leakage in the production process.
E. Check the application for sewage permit, the implementation of sewage declaration and the implementation of sewage fee payment.
Check all kinds of pollution and control on the spot. If the enterprise does not have relevant pollution discharge links (such as the impact of links on groundwater, etc.). ), it may not be checked.
Environmental supervision and law enforcement on-site inspection of enterprises is divided into eight aspects:
A, sewage pollution control inspectors
1, environmental monitoring of water pollution sources
Operation status, historical operation status, treatment capacity and water quantity, wastewater quality management, treatment effect and sludge treatment and disposal of sewage treatment facilities. Whether to establish a ledger for the operation of wastewater facilities (key time of wastewater treatment facilities, daily wastewater inflow and outflow, water quality, dosing and maintenance records). )
2. Sewage outlet supervision
1) Check whether the position of the sewage outlet meets the requirements;
2) Check whether the number of sewage outlets of polluters meets the relevant regulations;
3) Check whether the setting of monitoring sampling points meets the relevant pollutant discharge standards and regulations;
4) Check whether a standardized flow measurement section is set to facilitate the measurement of flow and speed.
5) Check the general sewage outlets and set up environmental protection signs.
6) Check whether the online monitoring and monitoring equipment is set as required.
3. Replacement review
1) If there are flow meters and pollution source monitoring equipment, check the operation records;
2) If there is a water supply device or a water certificate, the displacement shall be calculated according to the water consumption;
3) If there is no metering number and valid water certificate, the number of drainage systems of similar enterprises given in relevant national standards and manuals shall be estimated.
4. Discharge water quality
1) Check whether the discharged wastewater quality meets the requirements of national or local pollutant discharge standards.
2) Check the models, specifications, verification and calibration of monitoring instruments, meters and equipment.
3) Check the monitoring analysis methods and water quality monitoring records. On-site monitoring or sampling can be carried out when necessary.
4) Check the rain and sewage diversion, and check whether the sewage disposal unit implements cleaning and sewage diversion.
5, accident wastewater emergency disposal facilities
1) Whether the emergency disposal facilities of accident wastewater in sewage disposal enterprises are complete, and whether the interception, storage and treatment of wastewater generated by environmental pollution accidents can be ensured.
2) Check the reuse of treated wastewater.
Second, the exhaust pollution inspection
Check the operation, historical operation, treatment capacity and production capacity of waste gas treatment facilities.
1, boiler, petrochemical, chemical and other combustion exhaust gas inspection.
1) Check whether it is reasonable to recycle or incinerate the combustible organic waste gas continuously produced by chemical and petrochemical enterprises, and whether it is reasonable to treat the combustible organic waste gas intermittently produced by incineration, adsorption or combined processes.
2) Check the inspection procedures and performance indicators of boiler combustion equipment, check the operation status of combustion equipment, and check the control of sulfur dioxide and nitrogen oxides.
2, process waste gas, dust and odor pollution sources
1) Check whether the discharge of waste gas, dust and odor meets the requirements of relevant pollutant discharge standards;
2) Check the recovery of combustible gas;
3) Check the environmental protection measures for transportation, loading and unloading and storage that can emit toxic and harmful gases and dust;
3, air pollution prevention and control facilities
Purification system for gas pollutants such as dust removal, desulfurization and out-of-stock.
4. Exhaust gas outlet
1) Check whether the polluter has built a new vent in the area where new vent is prohibited;
2) Check whether the height of the exhaust pipe meets the national or local pollutant discharge standards;
3) Check whether the exhaust passage has a sampling hole and a sampling monitoring platform;
4) Check whether the exhaust port is set according to the required specifications (height, sampling port, signboard, etc.). ), and whether the exhaust gas and practical online monitoring facilities required by the environmental protection department are installed.
5. unorganized emission sources
1) If the unorganized discharge point of toxic and harmful gases, dust and soot can be discharged in an organized way, check whether the pollutant discharging unit has made rectification and implemented organized discharge;
2) Check the dust generated by coal yard, material yard, goods and construction production, and see whether measures to prevent dust pollution have been taken or dust-proof equipment has been set up as required;
3) Monitor at the enterprise boundary to check whether unorganized emissions meet the requirements of relevant environmental protection standards.
Three. On-site inspection of solid waste pollution sources
1, check the source of solid waste.
1) Check the type, quantity, physical and chemical properties and generation mode of solid waste.
2) According to the new National Hazardous Waste List or GB5085, check the types and quantities of hazardous wastes in production.
2. Storage, treatment and disposal of solid waste
1) Check whether the polluter undertakes the facilities and places for centralized storage and disposal of industrial solid waste and domestic waste landfill in areas requiring special protection, such as nature reserves, scenic spots, drinking water source protection areas and basic farmland protection areas.
2) Check whether the solid waste storage facilities or storage yard are equipped with facilities that meet the requirements of environmental protection.
3. Hazardous waste storage, treatment and disposal
Check whether the polluters dump solid wastes into rivers, Hu Bo, canals, channels, reservoirs, beaches and bank slopes below the highest water level and other places where dumping of wastes is prohibited by laws and regulations.
4, solid waste transfer
1) Check the transfer of solid waste.
2) If hazardous waste is transferred, check whether the hazardous waste transfer form is filled in. Approved by the competent department of environmental protection of the local people's government at or above the municipal level in the place where they moved out and the competent department of environmental protection of the local people's government at or above the municipal level in the receiving community.
3) Check whether the signs of solid waste and hazardous waste are set.
4) Check the sludge disposal contract, sludge transportation and weighing records, etc. Judge whether the sludge output is reasonable.
Four. On-site inspection of noise pollution sources
Whether the pollution control facilities are set according to the requirements of EIA documents or EIA approval, and whether the noise is up to standard.
Verb (abbreviation of verb) on-site inspection of groundwater pollution
1) Whether there are site sewage treatment facilities (units), heavy-duty links, solid waste (hazardous waste) stacking places, chemical stacking places, etc. There are anti-leakage and anti-corrosion measures.
2) If there is groundwater pollution, whether the control measures are in place.
Six, environmental risks and emergency plans on-site inspection
1) Check the preparation, evaluation and preparation of the emergency plan, and attach the text, pictures and related materials of the emergency drill.
2) Whether the project meets the requirements of environmental protection, such as initial rain pool (such as chemical industry, electroplating, printing and dyeing, heavy industry) and emergency accident pool.
3) Emergency material reserve (name, quantity, validity period, etc. )
Seven, the ecological environment on-site inspection
Eight, environmental protection department inspectors to investigate and deal with environmental violations.
The necessity of investigating, transferring and supervising the complaints and reports of environmental pollution and ecological destruction has attracted great attention. Fines are not easy to get away with.
-End-
If you think the content is good, don't forget to forward it. Of course, if you are interested in any content or have any suggestions for us, you can leave a message and tell us. I'm here, waiting for your news ~ ~ ~