Floor paint is needed for decoration in many occasions. Epoxy self-leveling paint is not only very smooth and beautiful, but also has the characteristics of anti-slip and wear resistance, so it is favored by consumers. Then, what is the price of epoxy self-leveling paint? Next, let's bring you an introduction about the price of epoxy self-leveling paint. Let's take a look.

1. The price of epoxy self-leveling paint

1. Tianjin Sanhong Special Paint Co., Ltd., the price of self-leveling floor paint is 26 yuan; Shenzhen Jiacai Building Materials Co., Ltd. Epoxy Floor Paint, 34 yuan; Wuxi Junteng Floor Technology Co., Ltd., epoxy floor paint, the price is 41 yuan.

2. Zhengzhou Shangxia Purification Engineering Co., Ltd., epoxy floor paint, 32 yuan. Brand: Jieda, category: epoxy self-leveling floor paint, according to solvent type: paint, color: diverse, single piece net weight: 15kg, shelf life: 12 months, function: wear resistance, price: 38 yuan. Category: epoxy self-leveling floor paint, solvent: oily paint.

3. Brand: South Asia 128, color: various colors, single piece net weight: 25111g, shelf life: 36 months, price: 35 yuan. It is often scraped with self-leveling paint, and the paint consumption per square meter is 1.1kg. It is coated with self-leveling coating, and the coating consumption per square meter is 1.8-1.1 kg. If it is necessary to increase the thickness, two or more layers of medium coat mortar can be coated; 1.2mm epoxy self-leveling material 45-51 yuan; 1.5mm thickness about 51 yuan; 2.1mm epoxy resin self-leveling contractor 55-61 yuan, 3.1mm thickness between 65-71 yuan.

Second, the basic requirements for the construction of epoxy self-leveling paint:

1. Epoxy self-leveling paint is a ground construction technology. It is a liquid made of a mixture of various materials and water. It falls on the ground and flows with the height of the ground. It can automatically level and dry quickly. Self-leveling floor paint has excellent functionality, so there are certain technological requirements in construction.

2. Before the construction of epoxy self-leveling paint, the strength, humidity and compactness of the base layer must be checked, because the self-leveling floor paint is a one-time thick film molding, and it is difficult to repair the thick film molding if it is not checked in advance. Self-leveling floor paint should also avoid low temperature and high humidity environment, which will affect the curing speed of epoxy resin, and the moisture of curing agent will also affect the quality of products.

3. Scratch coating is a common construction method of self-leveling floor coating. Because of its simple operation, easy training for newcomers and wide application, scraping is also the first construction method in China. However, there are also some shortcomings, that is, the efficiency of single-person buildings will be reduced. If it is used in a large area, it is recommended to use airless spraying, which is safe and effective, and can also save materials.

3. Features of epoxy self-leveling paint

1. Good leveling performance, non-toxic, odorless, water-based, environmentally friendly, easy to clean, high wear resistance, high film forming rate, high air permeability, good anti-pollution and good decorative performance

2. Suitable places for epoxy self-leveling paint

3. Factory workshops, underground garages and indoor ground engineering have high requirements for ground leveling < When cleaning the floor, please use a soft absorbent or wet vacuum cleaner, which can be cleaned with water or detergent, but please pay attention to the slippery floor. Before the equipment enters the factory, put the bottom of the cardboard box on the floor to avoid scratching the ground during transportation.

2. For trolleys, please use hard or elastic rubber wheels as wheels, and use them inside and outside the factory respectively. 8. Wax according to the requirements of the ground (the effect can prevent the ground from being scratched). After the flat construction is completed, it will take 7-11 days to put it into use. During curing, water or other solutions should be avoided from penetrating into the surface. All employees entering the workshop must be replaced with rubber shoes (black shoes that cannot be worn at the bottom of foam) (to avoid the sand outside being scraped into the workshop).

3. For any hardware, such as iron chairs, iron tables and iron frames, the feet should be wrapped with soft plastic, rubber or filled with paper to avoid scratching the ground during use.

The above is the introduction of epoxy self-leveling paint that we brought to you. Thank you for reading.