Current location - Recipe Complete Network - Catering franchise - What is the cause of dripping water on the refrigerator workbench and how to solve it?
What is the cause of dripping water on the refrigerator workbench and how to solve it?
It may be 1, the refrigerator door won't close and it leaks; 2. The drain in the refrigerator is blocked or frozen, resulting in water leakage; 3. The freezing chamber will not freeze and cause water leakage; 4, refrigerator condenser tube rupture caused by water leakage.

Suggested solution:

1, refrigerator door won't close, water leaks. Generally, the door seal of refrigerator is not tight. There are two cases: the door seal is deformed and the door seal is not magnetically deformed. After removing the door seal, put it in hot water of about 90 degrees for about 10 minutes. It is said that the door seal can be installed after being laid flat for 20 minutes. The door sealing strip has not been magnetically treated: the door sealing strip is directly replaced or.

2. Use a 1.5 meter cord to dredge it back and forth through the drain hole in the back wall of the refrigerator, so that the water can flow to the water receiving tray of the compressor, and the water will evaporate after the compressor works!

3. Drain the water from the food and store it in a box or bag.

4. The water tray or evaporator is placed in the wrong position, deviated, tilted or not in place, so that water flows out. The water tray is full of water and overflows to the ground, resulting in water accumulation on the ground around the box. The treatment method is to put the water tray and evaporator in place, so that the water in the box can flow into the water tray and evaporator accurately. Pour water into the puddle in time.