advertising light box is a very popular way of company publicity at present, which is well received by the majority of users. Many businesses choose to install light box advertisements near physical stores to let more consumers know about the activities of the stores. What is the method of making advertising light boxes? Let's take a look.

manufacturing method of advertising light box

1. Manufacturing material of advertising light box

Keel: made of wood strips, angle irons or aluminum alloy profiles.

light source: two sets of fluorescent tubes.

panel: plexiglass color plate or pvc color plate.

bracket: triangular iron frame.

2. Tools for making advertising light boxes

Electric drills, cross screwdrivers, trowels, hacksaws, wood saws, shovel hammers, pliers, small nails, latex, hook knives, wire saws and plexiglass glue.

Third, the key points of making advertising light boxes

1. Light box design: The design requirements require that the size, color and font of the light box should be arranged in the primary and secondary order, and the pictures and texts should be changed and placed horizontally and vertically. In addition, it depends on the bracket made at the installation site. Based on the design, the size, font and color of each word are calculated and searched.

2. Light box keel: generally hexahedron. Materials: 21×21 or 31×31.

3. Angle iron: it can be processed by itself with conditions, but can be processed outside without conditions.

4. Wood: nail rack with 2×2 cm square wood.

5. Blanking: four pieces in length and four pieces in width, and 1.5cm less from the length and width = wood length. Saw 2×1 tenons at both ends, paste them with white latex and nail them. Thickness dimension minus two material thicknesses +1.5= thickness length. Then put on white latex and nail it. Aluminum material: aluminum alloy material for floor cabinets, with the same height, width and length. Saw it at a 45-degree angle and connect it with plug-ins.

6. lighting: generally, two or three fluorescent tubes are used. 41W1.2 long lamp tube, with 1.3m light box. 31W lamp tube is 1.9 meters long, which is used in light boxes over 1.1 meters. The thickness is generally 21-25 cm. Therefore, when negotiating with customers, we must consider the material saving problem of organic board (specification is 1831×1211mm) and the length of fluorescent tubes. When installing, install lamp caps and ignition lamps with screws at both ends of the lamp holder, and the ballast will be placed beside it. It is best to stick the ignition lamps with adhesive tape after trial burning. The power cord is connected according to the ballast circuit, and the wires are thicker at 1.7mm and 1.8mm along with the wooden frame according to the schematic diagram of fluorescent lamp ballast.

7. Light box panel: mostly with white background, divided into two kinds of plexiglass plates: milky white and magnetic white. Generally, I like to use a magnetic whiteboard: first, the white magnetic board has a white surface; second, the leftover materials can be used for processing small print, otherwise the milky white paste can't be used, the red background is red, the blue background is blue, and the benzene board can't be made, and the glue marks can be seen. Cut the board of the light box with a hook knife, and the length, width and size are 2-3mm smaller than the wooden frame.

8. Upper plate: When nailing small nails (1.5mm), drill a small hole with an electric drill first, otherwise the hard nails will crack, just nail at the edge of 5 mm, and nail three or four nails more than one meter long. Only four nails can be nailed to the 21mm wide side plate. Drill holes in the side to thread the wires out.

9. Aluminum strip: 21×21mm aluminum corners are used, and the length and width are all 2mm larger than the top plexiglass board. The aluminum corner head is sawed at a 45-degree angle, and the screws are all nailed on the 21mm thick side, including regular script on the front. People can't see the nail.

11. Paste the organic characters: arrange the characters on the light box according to the design, lightly check, straighten the characters, and then paste them with organic glass glue. There are two pasting methods, one is to stick the organic glue on it, and the other is to use a medical needle to suck the organic glue and gently inject the edges. The second one is better than the first one. Check whether there are any typos, missing words or reversed words, and check whether each word is glued firmly and whether there are any missing words.

11. Cleanliness: Use a small piece of clean cloth, dip it in some water, and then squeeze some toothpaste to wipe it evenly. After wiping it evenly, dip it in some water with a cloth, and wipe it on a large area. The water is not easy, so the cloth can be wet.

12, light box installation sequence: design bracket-blanking-welding press-fixing-light box installation.

IV. Precautions for installation of advertising light boxes

1. Operators must wear pure cotton white gloves when disassembling and assembling light boxes. Because the hands will sweat, and there are chemical components such as oil, salt, acid and alkali in the sweat, they are corrosive to some extent. Sticking to stainless steel will slowly corrode the surface of stainless steel, making the surface of stainless steel slowly fade and discolor, losing its original color and affecting its appearance.

2. When disassembling the outer frame of the light box, you must handle it with care, and collision and distortion are prohibited.

3. Unplug the plug, disconnect the power supply, and then check the original electrical appliance (live operation is prohibited); Careful inspection is required, such as the power cord entry hole, ballast input and output terminals, wires on the lamp holder, etc.

4. The size of the light box must be consistent with the size of the light guide plate, not too big or too small, so as not to affect the display effect and the heat inside the light box;

5. When installing the outer frame of the light box, handle it gently, lift it horizontally and hang it horizontally.

6. Then check the power cord of the light box.

7. Plug in the power plug and turn on the main power switch to see if the light is normal. If there is a phenomenon that one side is on and the other side is off, please disconnect the power first, unplug the plug, and check whether the lamp socket wire is loose or not. Whether the input and output wires of ballast are loose, etc.

8. If the whole light box is not lit, please check whether the leakage protector is closed, whether the wire connector in the plug is loose, whether the input and output connectors of the ballast are loose, etc.

9. If the leakage protector is not turned on, please check whether the input of the power cord, the ballast and the branch circuit under the lamp tube are leaking

11. If there is too high noise in the light box, please check whether the ballast is aging;

11. If the light box turns on and off, please check whether the ballast, each terminal and plug are aging, whether the lamp tube is in place or aging, etc. Please check whether the leakage protector is closed, whether the wire connector in the plug is loose, whether the input and output connectors of the ballast are loose, etc.

9. If the leakage protector is not turned on, please check whether the input of the power cord, the ballast and the branch circuit below the lamp tube are leaking

.

11. If the light box turns on and off, please check whether the ballast, terminals and plugs are aging, and whether the lamp is in place or aging.