Energy-saving measures commonly used in property management

Energy-saving refers to the application of methods that are technically reliable, economically feasible and reasonable, and acceptable to the environment and society, so as to effectively utilize energy and improve the energy utilization efficiency of energy-using equipment or technology. I will share the common energy-saving measures of property management for you. Welcome to read and browse.

1. What about the public lighting system? Energy saving?

Main measures and means:

(1) The public lighting lamps adopt `lamps with energy saving';

(2) The public lighting switch in the building adopts controllable lighting switch, which can be turned on as needed;

(3) For public entertainment places, the responsibility system of special attendance shall be implemented, and the entertainment places shall be switched according to the number of people;

(4) The lighting of parking and garage shall be switched on and off in different periods;

(5) The lighting of the facilities and equipment rooms of the public * * * shall be controlled according to the working conditions of the personnel. When carrying out maintenance, more lights shall be turned on, and less or no lights shall be turned on at ordinary times.

2. what about the power transformation and distribution equipment? Energy saving?

(1) Low transformer loss. According to different seasons, adjust the external environment temperature of transformer (for indoor dry transformation), and adopt artificial methods to reduce the external temperature in summer. (Excessive external temperature, excessive loss);

(2) adjust the balance of three-phase load to reduce the loss of transformer and line;

(3) Adjust the capacity of capacitor compensation, improve the quality of electricity consumption, and obtain compensation for electricity charges.

3. Three-phase AC motor frequency conversion? Energy saving?

(1) frequency conversion of secondary water supply motor saves energy (for direct pressurized secondary water supply). According to the water consumption, frequency conversion of water pressure is adopted to save electricity;

(2) elevator frequency conversion saves energy. According to the number of elevator passengers, traction sensors are installed to adjust the frequency of elevator traction motors, thus saving electricity.

4. What about the secondary water supply system? Energy saving?

(1) The switch, gate and automatic water level control of the reservoir and roof water tank shall be inspected frequently to prevent water from running and leaking due to malfunction;

(2) detect and maintain the water supply pipe network in time, so as to prevent the water supply pipe network from problems, water leakage and waste;

(3) Strengthen the maintenance of the main valve of the main water supply network, so as to prevent the branch water supply network from having problems and not being closed in time, resulting in waste.

note: the water supply system is not like the power supply system. Once there is a local problem, the water supply system will not stop supplying. In addition, once the problem is repaired, the waste will be irretrievable. Therefore, daily inspection and maintenance is particularly important for water supply and energy saving.

5. Quantitative management of water and electricity meters

Most residents in Haikou are responsible for reading meters and paying fees, which brings certain risks to the operation of the property company. Therefore, it is necessary to do a good job in hydropower balance calculation. Regularly check the data of the general table and household sub-tables, so as to measure first, then analyze and then balance, and adopt the comparison method to reflect the water and electricity consumption in time and effectively. Through the quantitative management of water and electricity, the problems can be quickly found out and dealt with in time, so as to avoid the risk of water and electricity losses. ;