Many friends like wall coloring, in fact, the basic techniques are very simple. Everyone may wish to try

Preparation tools, painted paper. Whiteboard paper (that is, a little thicker cardboard), sulfuric acid paper (through the map with). These two kinds of paper are sold in stationery stores. Long grid ruler, preferably 50cm steel grid ruler. Acrylic paints, or paints and brushes. As a side note, sulfate paper is a translucent paper. Translucent paper is used for drawing. So you don't have to worry about it after you buy it. If there is a thicker butter paper is better, but the price is a little high.

Paper pictures are not easy to find. You should be able to see it yourselves if you go to a stationery store.

The reason why I chose steel for the grid rule is because it's easier to cut. Of course, I forgot to mention earlier that there are also wallpaper cutters.

If you feel that you are not good at hand-drawing, and you are afraid that you can't draw a good draft JM, you can download your favorite pattern on the Internet, and use your printer to type it out. , If you think it is not big enough, you can go to the photocopying society to expand to the size of A3 paper. There are dozens more, each dispersed to make, and finally assembled into the finished manuscript.

Steps:

One, select the manuscript

Choose your favorite manuscript is not difficult to get from magazines at hand, randomly downloaded from the Internet, but there is a point to bear in mind, if you are ready to print it out to use, it is necessary to ensure that the picture is not too small, or print is not clear.

Two, expanding the print

Will choose a good pattern, expanding the print to the size they need. Here I introduce a few methods: 1. hand-drawn, this does not need to be detailed. 2. can simply be put into the arm, we all know that the maximum size of the copier recognition of the paper for the A3 (297mm * 420mm), if you need the pattern just in this range, congratulations, you can go directly to the copying society to expand. 3. splicing enlargement, is the pattern is divided into a number of parts, one by one, the production of the pieces.

Three, through the map

Through the draft: tools: base, sulfate paper, cardboard, butter paper can also be, 2B pencil, wallpaper knife.

One, the sulfuric acid paper fixed on the base.

Second, with a 2B pencil on the sulfate paper through the draft.

Three, if you use very thick kraft paper, you can just cut it, if you have to transfer it to cardstock, then you need to use a 2B pencil and apply pencil shavings all over the back of the sulfate paper.

Four, the coated pencil shavings of the sulfate paper, back side down on the whiteboard paper fixed.

Fifth, use a ballpoint pen without oil through the draft. It is to trace over.

Sixth, remove the sulfate paper, you can see the whiteboard paper with a drawn manuscript.

Basic tools for coloring: template, template brush, adhesive paper, ruler, tray

Next, fix the template on the wall, dip the template brush into the color to fill the fastened space evenly. Be especially careful not to break the paint mold underneath the stencil when you uncover it. You can repeat the print if needed, but remember to wait for the paint film underneath to dry or be careful of smudging. Use a stencil brush dipped in color to fill the snapped space evenly.