Sometimes we buy attractive range hoods. I didn't feel attractive at first, but after using it for a while, some people found that the attraction was not good. In fact, there are many factors affecting the effect of lampblack from range hoods. Today, let's talk about the reasons why the lampblack machine is not attractive except for its own performance.

for the range hood, in short, its essence is the fan, and the most attractive factors are its own power and design. I think everyone knows this, which is why we choose a strong attractive range hood. However, there are also the following reasons that affect its attraction and oil smoke absorption effect.

1. The installation height does not meet the requirements

The range hood we bought at home has corresponding installation requirements, whether it is top suction type or side suction type. The biggest requirement is the height. For the side range hood, the bottom is 35 to 41 cm from the ground and the top is 65 to 71 cm. Of course, some manufacturers have slightly different heights according to the different ventilation ducts designed. If we don't follow the best installation height given by the manufacturer when installing, whether it is too high or too low, it may affect the lampblack effect of the lampblack machine itself. Which means it's not attractive.

solution: if the installation is not as required, it needs to be reinstalled and adjusted according to the installation instructions of the range hood.

2. The range hood is too dirty

Although the current range hood is clean-free, research continues, but unfortunately, the stubborn oil fume attachment cannot be completely cured. Oil will still be attached to the blades and ventilation ducts of the range hood during long-term use. These oils will affect the operation of the fan, hinder air circulation, and directly affect the suction of the range hood.

solution: not cleaning the range hood for a long time is obviously not attractive. Please get into the habit of cleaning the range hood thoroughly once and regularly. In this way, as long as you keep the range hood clean, you can ensure its attractiveness.

3. The pipe is too long or bent too much

The range hood is usually equipped with a pipe leading to the outdoor or public flue, but the installation of this pipe has requirements. If it is not installed as required, it will affect the attractiveness of the range hood. In fact, the biggest influence is the length of the smoke pipe and the elbow. When we install it, if it is not installed according to the requirements, if the pipes used are too long or there are too many elbows, the exhaust of the range hood will produce great resistance, which will affect the attractiveness of the range hood.

solution: for the length and elbow of the pipeline, you need to refer to the installation instructions of the range hood. Generally speaking, this is in line with the design power of the range hood. Just install it as required. It is best to use an arc-shaped flue. The shorter the pipe of the range hood, the fewer elbows the better. 4. Use when the kitchen and windows are closed.

in a closed room, if the blower is used to draw air out, the room will generate negative pressure. So is our kitchen. When using the range hood, if the doors and windows are closed, it will become a closed space. Even if air enters the crack of the door, it will prevent the range hood from sucking air outwards. The range hood is not attractive enough.

solution: when the doors and windows are closed, if the attractiveness of the range hood decreases, please try to open the window. In that case, the amount of inhalation can be ensured. One can relieve stress and the other can ensure the oxygen content in the kitchen. This can also solve the problem that the range hood is not attractive enough.

in addition to its own performance problems, the lack of attractiveness of the range hood is also related to the above four situations. These four situations will lead to the lack of attractiveness of range hoods. We also give the corresponding solutions. In general, ensure the attractiveness of the range hood. When choosing optional parts, please choose attractive products, please install them as required, pay attention to daily cleaning and maintenance, and pay attention to the smooth flue and window opening. In this way, the range hood will serve us better.