Demonstrate and draw the construction drawing of wall demolition with CAD software;
1. Open the CAD, open the material, adjust the layer 1- to create a new wall, double-click to enter the model space, press PLINE multi-line drawing, enter 60, enter 1070 again, press the space bar, and enter 140.
2. Draw according to the L line, enter 60 and drag it to the end.
3. Press O for offset, offset 140. Press the L line, draw the outgoing line, enter 640, and then enter 140 again, as shown in the figure.
4. Draw according to the L line, and enter the height of 200 and the width of 900, as shown in the figure.
5. Draw according to the L line, enter 240, and repeat the operation, as shown in the figure.
6. Press the L line, draw a picture, enter the width of 520, and connect them, as shown in the figure.
7. Adjust the layer 1- Create a new fill, fill the H mode, and adjust the style BRTCK. Click Add Pick Point, adjust the scale to 10, and then fill it.
8. Press Ctrl+C to copy the legend and description, and Ctrl+V to paste and adjust the position. Adjust Layer 5- Text and Legend. Adjust the color to yellow. Change the selected text to logo text.
9. Press M to move the PL position, and use the T-text tool to modify the text wall drawing and adjust the position.
The above is the operation flow of CAD software demonstrating the construction drawing of wall demolition. Have you learned? Almost all construction drawings do this. If you want to know more about construction drawing, please continue.