1. Determine the installation location: the long-line commercial dishwasher needs to be installed in a well-ventilated room. It is best to install it near water source, power supply and drainage pipeline for easy connection. At the same time, it needs to be placed horizontally
2. Install the water source interface: connect the water inlet pipe of the dishwasher to the water source pipe. If the water source pipe connector does not meet the requirements of the dishwasher, the water source connector needs to be replaced again.
3. Install the power connector: connect the power cord of the dishwasher to the power connector, and pay attention to contact safety and adequate grounding.
4. Install the drain pipe: connect the drain pipe of the dishwasher to the drain pipe. Pay attention to the height of the drain pipe.
5. Connect the dishwasher to the water source and power supply: After the dishwasher is connected to the water source and power supply, it needs to be checked and put into trial operation to ensure the correct connection and normal operation.
6. Install the ready-made flow controller: Because the dishwasher needs to consume a lot of water when working, installing the flow controller can achieve the purpose of reducing the waste of water resources.
7. Install and prepare wastewater treatment equipment: Because washing dishes will produce a lot of wastewater, which may pollute the environment if it is not handled properly. Therefore, it is necessary to install wastewater treatment equipment to protect the environment.
In short, the installation of long-line commercial dishwashers needs to follow the above methods to ensure safe, stable and efficient operation.