Considerations for store decoration
Space layout should be reasonable
When carrying out store design, the first thing to consider is how to better utilize the space. The smaller the area of the store, the more it is necessary to make full use of the space. The store is mainly to operate goods, in the design of the store, should mainly consider the layout of the goods. Operators are best to split the slot display of goods, because there is a high frequency of purchase, the purchase of scattered characteristics, from the easy access to goods and anti-theft considerations, generally should be placed in the store on the inside, and with the counter to separate it from the outside.
In order to ensure that there is sufficient display space, a large area of shelves is essential. In general, shelves should be set on every wall in the store except for walls with special purposes. Shelves for display, according to the material to determine its length, too long is poor load-bearing effect, there are security risks; too short is more spaced out, resulting in a waste of space.
The area of less than 20 square meters of the store, in order to make full use of space, the need to carefully calculate the length of the shelves and the number of sections, in order to make the shelves and the store to achieve the best match; area of more than 30 square meters of the store, you can consider setting up the main product display area, because the store in the future business, may be a brand of cigarettes or alcohol for key promotions, the need to focus on display; area of more than 40 square meters of the store can be designed to stack the shelves, the store can design the shelves. 40 square meters above the store can be designed to stack the head position, which is also out of sales of key brands to consider.
In addition, the operator should be based on the size of the sales volume of goods set aside for the turnover of goods storage area, which will bring great convenience to the future operation.
Security precautions to keep in mind
The stores are dealing with high-end goods. From the cases of theft of retail stores around the world, the key objects stolen by criminals are high-grade goods, so operators should enhance the awareness of security precautions, in the store design should be taken into account when the security issues. Operators should pay attention to both anti-theft and fire prevention when designing and decorating their stores.
Anti-theft store anti-theft to pay attention to three aspects. First, small, lightweight, easy to access goods should be placed in the counter; second, because the goods are often directly facing the customer, in order to avoid leaving the opportunity for lawbreakers to take advantage of all open shelves should be installed with glass doors, equipped with locks if necessary; third, the installation of the store door should be in line with the requirements of anti-theft, to set the necessary anti-theft alarm device.
Fire prevention Shop is generally more upscale decoration, the installation of more lighting, wiring laying is also more hidden, a little careless, it is easy to leave hidden security risks. In the decoration of the store, in addition to ensuring the use of qualified decoration materials, but also to ensure that the lines laid to facilitate access. For example, should try to avoid the line behind the shelves, the line on the top of the shelves is a good choice. In addition, there is a certain economic strength of operators in the renovation can consider the use of fire-resistant materials.
Color lighting to be used
The color of the shelves and counters determine the main style of the store. The color chosen for store decoration should strive to be elegant, fashionable, not vulgar, in line with popular aesthetic requirements. At the same time, the color should not be too mixed, the color of the shelves to be able to set off the goods well as the standard, can not dominate. Floor and ceiling should usually choose light color tone.
Light for *** customer desire to buy, create a good shopping environment is very important. Reasonable use of lighting, lighting, can achieve the effect of improving the grade of goods. Store in the design of the store, should be reasonable use of the following types of lamps.
Lighting lamps These lamps are mainly used for store indoor lighting. If the indoor natural light is not good, the lighting lamp is the main source of light, the use of time is longer, so you should choose energy-saving lamps.
Spotlights are divided into shelf spotlights and door spotlights. These lights have a better effect on rendering the atmosphere, displaying goods, the disadvantage is easy to heat, high power consumption, should not be used for a long time.
Shining lights These lights are mainly used for regional lighting, mostly used in counters, shelves, the role is to increase the brightness of the goods, so that the packaging of goods glow. Such lights are mostly fluorescent lamps.
Light boxes are mainly used for indoor advertising and outdoor store signboards. Inside the light box usually use fluorescent lamps.
Increase the brightness of the room, in addition to pay attention to the use of lights, but also pay attention to the use of mirrors. I recommend that operators in the shelves on the inside of all inlaid mirrors to enhance the reflection of light, enhance the effect of commodity display. If conditions permit, operators should try to improve the use of windows and doors to increase the amount of light.
Door design should be eye-catching
Consumers recognize an unfamiliar store from its appearance. Their general psychology is: an elegantly decorated store, the sale of goods should also be high-grade quality; a general decoration and even the appearance of old and outdated stores, the sale of goods should be lower grade, the quality is difficult to guarantee. It can be seen that a good front design is crucial for a store.
The store front must be designed to be novel, concise, beautiful and generous, can attract the attention of customers. Because the store sign itself is an advertisement with a specific meaning, the color of the sign should be eye-catching, and it should be able to be seen by customers or passers-by from a distance or from multiple angles.
The form and installation of the signboard should strive to be different, not only to be eye-catching, but also to integrate with the store design, to establish a perfect appearance of the image.
For most stores, there are two golden hours of sales in a day, namely the two time periods of noon and night. When the sky darkens, if there is not enough light to illuminate, and then the good front can not be reflected, not to mention to attract consumers. Therefore, the store front design should fully consider the problem of night lighting. Light box cloth, neon lights, aluminum composite panels with spotlights, acrylic blisters, can meet the requirements, but the light box cloth is the cheapest material, from the store's grade and positioning, it is not recommended to use the light box cloth.
Precautions when decorating clothing stores
First, the ground should not be all paved marble
Marble is dozens of times higher than the weight of the floor tiles and wood flooring, if the ground is all paved with marble there is a possibility that the floor can not be overburdened. Especially above the second floor, because without the house safety appraisal station appraisal of the house decoration, the weight of the floor decoration materials shall not exceed 40 kg / square meter.
Second, shall not arbitrarily in the load-bearing wall through the hole
Do not change the load-bearing wall or demolition of connecting line balcony and doors and windows of the wall as well as expanding the size of the original door and window or another door and window, this practice will cause the building regional cracks and serious impact on the seismic capacity, thereby shortening the service life of the building.
Third, should not be excessive pursuit of luxury
In the four walls plastered with panels, the ceiling set on two or three layers of three-dimensional ceiling, this decoration appears to be luxury, is not desirable. Because the four walls are full of plates, occupying a larger space, will reduce the area of the entire space, the cost is also higher, while not conducive to fire prevention. Ceiling is too low will make the whole room produce a sense of depression. Fourth, avoid using aluminum wire wire due to the conductive efficiency of aluminum wire is poor, the use of wire is easy to heat, loose joints and even cause a fire, so the wire should be selected with copper wire. In addition, in the construction should also pay attention to not directly in the wall trench buried wires, should use the regular casing installation to avoid leakage and fire.
Notes on the renovation of second-hand houses
Structural optimization
1, second-hand house renovation, old house renovation, according to the actual situation of the house before the optimization of some structural layout, the wasted space to make full use of it;
2, demolition and renovation of some partitions and non-bearing walls, wall cabinets, roof cabinets, etc., to increase and improve the light and utilization.
Water optimization
1, according to the shower, sink, toilet, washing machine, washbasin, dunnage pool, water purifier, electric water heater, gas water heater location to increase some inlet, outlet, drain.
2, the original old pipeline with PPR pipe is best to use PPR composite copper pipe replacement for dark pipe.
3, the old valves are always shut off the water, both unsightly and not good, it is best to replace the quality of reliable vacuum copper ball valves.
Circuit optimization
1, many buildings around the 1990s, lighting and sockets mixed with a circuit, wire for the aluminum core wire or 1.5 square copper core wire, the use of the process, once the same time to open a number of electrical appliances or which one leakage of electrical appliances on the main gate jumped, resulting in other appliances can not be used properly, and in addition, these old houses have no grounding of the circuit protection, there is no effective way to prevent the circuit from aging, it can not be used to prevent the circuit from aging. There is no way to effectively prevent the circuit aging or short-circuit leakage on the human body caused by accidental injury, which is even more need to be completely transformed!
2, some of the old buildings of the strong electrical system at the end of the last century *** had a capacity increase in processing, but the capacity increase is generally limited to the air-conditioning circuit, basically guarantee the use of the cable, but most of these capacity increase cable routing for the wire groove routing or three-phase sheathed cable directly outside the wall, a serious impact on the wall's overall aesthetics, the lines should be transformed into a dark line.
3, these old houses; the old house distribution box settings are generally older, the circuit is too simple, and the power ratio of the various circuits is not reasonable, according to the power size of all the power devices, planning a safe and reasonable circuit design. Ideally, the distribution box should be five switching circuits: main switch, lighting, general outlets, air conditioning, kitchen and bathroom outlets. If there is a fast-heating water heater also need to install a separate circuit of 6-square copper-core wire.
4, with more and more electrical appliances and lamps used in the home, there are many places to place switches and sockets. Before the renovation must be done in advance of the wiring work, which places later need to be placed what appliances, to plan ahead, and the old house reserved switches and sockets are generally not enough. In general, a room should be set at least 3 sockets, the number of sockets in a two-bedroom home is not less than 15, and the switch is not less than 8. The same room should be the same height of the switch, the general switch lower from the ground 1.4 meters, the lower part of the socket from the ground 0.3 meters, all the switches should be set in a very convenient to reach the part.
Weak power optimization
1, cable TV, telephone lines should be rewired according to actual needs.
2, Internet TV is the trend, so each TV port to add a network interface, through the weak power box in the router to distribute.
3, increase the home weak power distribution box, modem, router, TV distributor, etc. need power and corresponding space, there is a special weak power distribution box will be much more convenient.
Wall optimization
1, eradicate the original environmentally friendly and water-resistant ordinary putty, replaced with more environmentally friendly and reliable water-resistant anti-cracking putty.
2, for the wall and floor foundation of the original regional hollow drums and cracked parts must be shoveled to a solid grass-roots level, and then paste kraft paper tape and paste glass mesh cloth anti-cracking treatment.
3, around the 1990s of the last century, many brick-concrete structure of the building wall plaster layer is a lot of paper lime cover, the internal bond strength is very low mixed mortar, this wall is particularly prone to large-area drums and cracks, scraping putty in advance before the anti-cracking treatment.
4, internal heat preservation and non-bearing wall wall cracking is more serious case must be full paste 9.5mm thick paper plasterboard anti-cracking treatment.
Optimization of doors and windows
1, shovel out the original environmentally friendly non-water-resistant common putty, replaced with more environmentally friendly and reliable water-resistant anti-cracking putty.
2, for the wall and floor foundation of the original regional hollow drums and cracked parts must be shoveled to a solid grass-roots level, and then paste kraft paper tape and paste glass mesh cloth anti-cracking treatment.
3, around the 1990s of the last century, many brick-concrete structure of the building wall plaster layer is a lot of paper lime cover, the internal bond strength is very low mixed mortar, this wall is particularly prone to large-area drums and cracks, scraping putty in advance before the anti-cracking treatment.
4, internal insulation and non-bearing wall wall cracking is more serious case must be full paste 9.5mm thick paper plasterboard anti-cracking treatment.
Thermal insulation optimization
1, some of the old house balcony railing and external walls have not done thermal insulation treatment or thermal insulation treatment measures are not reasonable.
2, the use of lightweight bricks, extruded plastic board, insulation rock wool, these lightweight insulation efficiency superior materials in these insulation efficiency weak parts of the thermal insulation treatment.
Water optimization
1, the old house bathroom and kitchen waterproof layer has been aged, anti-leakage effect is greatly reduced.
2, can be utilized for waterproofing of polymer Oriental Rainbow waterproofing mortar with superior environmental performance.
3, waterproofing is completed on the ground full of water, 24-hour water closure test, no leakage can be paved brick and other next process.