Safety production prevention self-inspection scheme 1
The Spring Festival is approaching. In order to do a good job in production safety during the festival and ensure that employees have a happy, peaceful and safe festival, the safety work during the Spring Festival is arranged as follows:
First, clearly understand the situation and raise awareness.
Production accidents are prone to occur at the end of the year and the beginning of the year. We need to carefully analyze the characteristics of safety management during Spring Festival travel rush, so as to further find out the key points of safety management.
1, do a good job in holiday management. During holidays, employees' activities of visiting relatives and friends increase, and they are easy to get drunk and get tired.
2. In a festive atmosphere, employees are easily distracted.
3. During festivals, some managers tend to be amiable, muddle along and lax in thinking when dealing with the problems existing in safety management.
4. Some workshops or teams allow employees to leave work early after finishing their work in class, which leads employees to rush to work early.
The above-mentioned holiday work characteristics have brought many pressures and challenges to safety production, and a little relaxation will lead to accidents. I hope that all workshops and departments must conscientiously do a good job in the ideological education, supervision and inspection of employees and explain the interests to employees; Managers at all levels set an example. The busier you are, the more you should keep a clear head and keep abreast of the safety production trends. Each workshop should take the current work safety as a serious task, concentrate, take effective measures, take strict precautions, and go all out to do the work safety during the Spring Festival.
Second, before the festival
(a) to strengthen the publicity and education of production safety, and create a strong atmosphere of "traditional festival safety".
During the Spring Festival, all workshops should take advantage of the pre-shift and post-shift meetings to strengthen education.
1. Require employees to put their work first, arrange their work and rest time reasonably, ensure adequate rest before work and avoid fatigue.
2. Drinking and drinking are strictly prohibited during work.
3. The person in charge of each department should strengthen the safety management of single-post operation, strengthen the safety education for employees and remind relevant personnel to pay attention to road traffic safety.
Related requirements:
1, education must be geared to all employees in the workshop and ensure the effect.
2. The person in charge of each workshop shall conduct holiday safety education for employees in this workshop and make education records at the same time.
(two) to carry out self-examination and self-correction of production safety, and strictly rectify potential safety hazards.
All workshops and departments should organize forces to conduct a comprehensive and in-depth inspection of the whole company, key places and key production and filling links in combination with the characteristics of safe production at the end of the year and during the Spring Festival, so as to investigate and eliminate all kinds of hidden dangers to the maximum extent.
1. All workshops should act quickly, organize and mobilize employees to investigate hidden dangers of accidents in combination with the characteristics of safe production in winter and spring, and seriously carry out self-examination and self-correction of safe production.
2, workshop director should personally organize, team by team, link by link, post by post, from personnel, equipment, management, environment and other aspects, all-round self-examination and self-correction. For the key prevention parts and weak links, we must strictly and carefully check.
3. The workshop director should personally ask about all kinds of potential safety hazards found in the inspection, especially those that have not been changed for a long time. Managers at all levels should firmly grasp, register and file one by one, assign responsibility to people one by one, formulate rectification measures one by one, pay close attention to the rectification of hidden dangers, and ensure that all kinds of hidden dangers are eliminated in time.
(3) Strengthen safety supervision and implement safety inspection.
1. The Ministry of Security should organize a pre-holiday safety inspection, especially the safety inspection of important places, key parts and key positions; Each responsible workshop should strengthen the supervision and inspection of fire control facilities and special equipment, and take effective measures to realize the effective control of major hazard sources.
2. For the safety inspection of key areas and parts of the company, the Ministry of Security and relevant departments should have inspection records, responsible persons, corrective measures and time requirements.
3. The business department of the company should actively do a good job in emergency material reserve and emergency response, and employees of all departments should be familiar with emergency plans.
4. The Operation Department is responsible for refining the scheduling and reporting system, defining the reporting procedures, reporting scope and reporting items, so as to lay a foundation for the scheduling and reporting on duty during holidays.
Third, in festivals.
(1) Strengthen the control of key links and deepen the investigation of safety responsibilities.
1. Managers at all levels should set an example to ensure normal work, the team leader should make a detailed investigation on the mental outlook of employees, and the manager at the next higher level should be responsible for supervision. Once found, those who work under the influence of alcohol and fatigue should be advised to go home and be dealt with seriously.
2. Each workshop should arrange and coordinate the work within the team, and strive to avoid the phenomenon of employees working overtime and shifting shifts.
3. Avoid high-risk operations during festivals. If high-risk operations are really necessary, risk analysis must be conducted and safety precautions must be formulated.
4. Food hygiene and safety. The person in charge of the company canteen will carry out pre-holiday safety inspection together with the canteen staff, focusing on the safety of food storage, gas pipelines and electricity consumption, urging the implementation of food hygiene and safety, enriching employees' holiday diet and doing a good job in logistics support.
5, material storage safety. All departments should carefully check and implement the safety precautions for valuables, instruments and equipment kept by their subordinate departments to ensure the safety of valuables, instruments and equipment; Safety inspection of raw materials stored in warehouses and outside warehouses; The use and storage of flammable substances and chemicals should be carefully checked. All kinds of gases and liquids shall be properly sealed and kept, and shall not be leaked or discarded at will. Items that are not used for the time being should be stored centrally, and attention should be paid to staying away from power and fire sources.
6. All kinds of safety accidents caused by inadequate inspection, responsibility, management and measures will be severely investigated and dealt with according to company regulations.
(two) serious duty discipline, to ensure the smooth flow of information channels.
1, all levels of the company should arrange special personnel to be on duty 24 hours a day according to the company's duty system, and the company's duty leader will check the duty of the personnel on duty in each workshop.
2, managers at all levels should ensure the smooth flow of telephone, mobile phone and other security information channels. Relevant personnel should report the accident as required, and quickly organize forces to start the emergency rescue plan in time to ensure that the problem is properly handled and solved.
3. In case of emergency, the personnel on duty should quickly organize forces to carry out emergency rescue, and report in time according to the procedures. Those who conceal the accident or fail to handle the accident shall be strictly investigated for the responsibility of the relevant personnel.
Fourth, after the festival
After the holiday, people should return to their posts, and their hearts should also return to their posts. All departments of the company should do a good job of collecting employees' hearts, and employees should adjust themselves in time so that their thoughts can be transferred from a relaxed holiday state to a positive work state as soon as possible. At the beginning of the new year, doing all the work well is a new starting point. All departments should carefully organize and rationally produce, so as to lay a solid foundation for the smooth completion of the annual safety production tasks.
Safety production prevention self-inspection scheme 2
I. Guiding ideology
With deepening the activities of "Year of Safe Production" and promoting the implementation of safety development strategy as the main line, with the theme of "Consolidating the safety foundation and creating a safe campus", according to the requirements of the county bureau and the actual work of the school, we will further intensify the investigation and rectification of school safety hazards and continuously strengthen the safety quality and preventive ability of teachers and students, so as to significantly reduce the safety hazards within the school, significantly improve the safety situation of the school and its surrounding environment, effectively prevent all kinds of serious safety accidents and comprehensively promote "safety"
Second, organize and lead.
In order to carry out safety inspection activities efficiently, the school set up an activity leading group.
Team leader:
Members:
The main responsibility and task is to collect, sort out and report the relevant information of the safety hazard investigation activities, and report it on time.
Third, the timing.
This special action started before June 18 and 20__, and ended on June 10/3.
Four, check the content and work measures
(a) school buildings, equipment and facilities safety inspection.
Seriously take effective measures to carry out a large-scale safety inspection of classrooms, offices, function rooms and other public areas in schools. Focus on the school's electrical equipment, fire fighting equipment and access and other important facilities to conduct a comprehensive inspection. If hidden dangers are found, they should be rectified in time, and those that cannot be rectified at one time should be reported and the management and safety education for teachers and students should be strengthened.
(B) comprehensive management of the surrounding environment of the campus
1, the school combined with the county public security, health, urban management, industry and commerce, food and drug supervision and other departments to carry out special rectification of small vendors, traffic order, food hygiene, Internet cafes and so on around the campus to ensure good order around the campus.
2. The school earnestly carried out the work of "police school education", actively contacted the police and public security patrol personnel in the jurisdiction, strengthened the governance around the campus, and ensured the good order and safety around the campus.
(3) traffic safety education
1.9 and 10 carried out special education twice to strengthen road traffic safety education for teachers and students. Educate students to obey traffic rules, care for traffic facilities, do not cross the road, do not take overloaded vehicles, do not take vehicles that do not meet safety conditions, ride in a civilized way, and be civilized and law-abiding students.
2. Hold a blackboard newspaper or handwritten newspaper competition.
Verb (abbreviation of verb) implementation steps
Stage 1: Publicity and launch (before June 18). According to the work requirements of "Safety Production Month" and safety inspection, the feasible implementation plan of Liangpao Primary School was formulated.
The second stage: self-examination of the school (June1September-August 3 1), organizing the "Six Ones" activities according to the requirements of "Safe Production Month" (organizing the staff to receive a safety training, organizing the students to receive a safety education, organizing an emergency evacuation drill, conducting a school safety suggestion collection activity, and sending letters to the parents of the students). Conduct a comprehensive safety hazard investigation on key parts, fill in the hidden danger investigation account carefully, and write the self-inspection report.
The third stage: centralized management (September1-June 65438+1October 10), centralized management of a number of long-standing, recurring and typical security risks, and truly nip them in the bud.
Stage 4: Summary of this activity and data archiving (August 1 to September 30th).
Safety production prevention self-inspection scheme 3
In order to actively respond to and implement the notice issued by Jiaocheng County Safety Supervision Bureau (Jiaocheng Safety Supervision Zi [20 _ _]No. 1 12), our company decided to start from September 12 and last until June 10. In this inspection, our company adheres to the policy of "safety first, prevention first and comprehensive treatment", and further promotes this safety inspection from the aspects of fulfilling responsibilities, strengthening supervision, advanced prevention, basic management, key links and construction site. In order to ensure the effective development of this activity, the following implementation plan is formulated. as follows
I. General requirements
Organize extensive and in-depth safety inspection activities,
1. In order to strengthen the organization and leadership of this safety inspection activity, our company is led by the Safety and Environmental Protection Department, and personnel from various production units are deployed to form a safety inspection team with clear division of labor to ensure the smooth progress of the safety inspection activity.
Second, the implementation steps
The activity is divided into four stages:
The first stage (from September 12 to September 15) is the publicity deployment stage, and the specific arrangements are as follows:
First, hold a special meeting to seriously convey and implement the spirit of document _ _ 1 12 and the detailed rules for the implementation of this major inspection.
Two, do a good job in the publicity of safety and quality inspection activities. The Safety & Environmental Protection Department issued a notice to the oxygen station, maintenance and technical transformation classes respectively, requiring the production and use departments of hazardous chemicals to cooperate with each other to complete the safety inspection.
The second stage (September 16 to September 18) is a self-examination and reflection stage:
First, the inspection team should guide all hazardous chemicals contact units to fundamentally improve the level of safety technology management, take effective measures to investigate and rectify hidden dangers in production safety, and resolutely prevent production safety accidents. It is required to conduct a comprehensive, systematic and thorough investigation and rectification, and conduct a comprehensive inspection from the source, process and details, leaving no dead ends.
Key points of safety inspection
(a) the scope of safety inspection and key investigation items
1, the safety situation of the production site
2, should know should be (employees' attention to safety in production, on-site management personnel's mastery of safety knowledge and hidden danger investigation, homework personnel's mastery of this type of work operation procedures and hazard prevention measures).
3. Implementation plan of safety management system and operation procedures related to oxygen production and use in oxygen station.
4. Whether the placement of oxygen cylinders and the configuration of safety accessories meet the national standards.
5. Whether the current on-site process safety measures with high risks can meet the safety requirements.
6. Check whether the managers and workers are familiar with the preventive measures of the site danger.
7, according to the principle of safety in production, check whether the site management personnel can effectively perform safety management duties.
8. Whether the safety valve, pressure vessel and its safety accessories are within the validity period.
(2) Electricity consumption at the production site
1. Check whether the field wiring violates the requirements of three-level distribution and two-level protection, and check whether the wiring must be set with a special protection zero line.
2, check whether all kinds of braking settings and equipment match, whether it is safe.
3. Check whether all kinds of equipment violate the principle of "one machine, one brake, one box leaking".
4, check all kinds of box, brake, line for damage, failure, aging phenomenon.
5, check whether there is private connection phenomenon on-site wiring.
6, check whether there is a mixed connection phenomenon between the field protection zero line and the work zero line.
7, check the effectiveness of lightning protection facilities.
(3) Fire fighting
1, check whether all fire extinguishers are effective.
2. Check whether the hot work system is strictly implemented at the site.
(4) Motor vehicles
1, check whether the motor vehicle is in a safe state, whether the maintenance work is timely and orderly, and whether the backfire prevention device is effective.
2. Whether the bottle collar personnel enter the bottle collar area as required to put out the fire for motor vehicles.
The third stage (September 19 to September 22nd) is the rectification stage:
According to the problems found in the second stage, formulate corresponding rectification measures and implement them. Strive to achieve the radical cure of outstanding problems, basically eliminate the problems that have not been cured for a long time, and ensure the orderly and controllable safety and quality of the construction site.
At this stage, combined with the above inspection data, the safety inspection team will keep a close eye on hidden dangers, carefully investigate hidden dangers, take timely measures to rectify the problems found, and immediately solve the problems that can be solved immediately, formulate rectification plans for those that cannot be solved immediately, and make rectification within a time limit to effectively eliminate potential safety hazards. The rectification of hidden dangers should be meticulous, not a mere formality or a mere formality.
The fourth stage (September 23 ~ 65438+1October 10) is the stage of continuous rectification and analysis: after the above three stages, the inspection team carefully analyzes all kinds of problems found in the inspection, and puts forward effective rectification measures for the problems found in the inspection that are difficult to rectify, so as to ensure the quality of the problems, eliminate all kinds of quality hidden dangers on the job site and never leave a blank.
After the inspection activities, all relevant departments should continue to check and correct the working materials, strengthen the supervision and management responsibilities of the departments' safety production, enhance the safety awareness and skills of operators, organize managers and operators to summarize and evaluate the activities, ensure that the whole team takes this inspection as an opportunity to firmly establish the concept of scientific development and safe development, further work hard on long-term management, strengthen management, implement responsibilities, continuously improve the level of safety production management, and make unremitting efforts to create a good safety production environment.
Safety production prevention self-inspection scheme 4
A few days ago, the Safety Committee of the State Council issued the Notice on Deepening the Inspection of Safety Production and Doing a Good Job of Safety Production in the Fourth Quarter (No.9 of the Safety Committee [20 _]). According to the relevant requirements of the provinces and cities to implement the spirit of the notice of the the State Council Safety Committee, it is decided through research that from now until the end of 65438+February, the safety inspection of the whole town will be organized immediately. The relevant matters are hereby notified as follows:
I. General requirements
After a comprehensive, in-depth and thorough inspection of production safety, we will further implement the main responsibility, departmental supervision responsibility and territorial management responsibility of production safety enterprises, comprehensively investigate and manage potential safety hazards, severely crack down on illegal acts, promote enterprises to further improve and implement safety management rules and regulations, strictly implement safety operation rules and standards, pay close attention to all work safety, resolutely curb all kinds of production safety accidents, and fully accomplish all annual production safety objectives and tasks.
Second, organize and lead.
In order to strengthen the leadership of the town's safety inspection work, a leading group was set up, with Secretary Sun Daming as the leader, Vice Mayor Xu Feizhou, Vice Mayor Qi Liangzu and Vice Mayor Gu Wenjie as the deputy heads, and the heads of the member units of the town safety committee as members to guide and coordinate the town's safety inspection work.
Third, the scope of inspection
Production and business units in various industries in the town focus on inspection of transportation, dangerous chemicals, fire protection, construction, fireworks, metallurgy and other industries and fields.
Fourth, check the data.
1. Implementation plan of safe production responsibility system. The establishment and implementation of the responsibility system for the legal representative of the enterprise and the main person in charge, the person in charge, the safety management personnel and the safety production responsibility system for each post.
2. Implementation scenarios of safety production laws, regulations and standard procedures.
3. Establish a safety production management organization, equipped with full-time (part-time) safety management personnel.
4. The establishment and implementation of safety management system and post safety operation procedures.
5. Implement the "three simultaneities" site of construction site safety supervision and inspection and safety facilities according to law; Safety supervision scenes of foreign construction teams (contractors), etc.
6. Hidden dangers investigation and rectification and major hazard monitoring scenarios.
7 important safety production facilities and equipment in good condition and daily management and maintenance; The good condition and inspection scheme of the storage containers and means of transport of dangerous special equipment and dangerous goods.
8 emergency management scenarios, including emergency rescue materials, emergency rescue plans and emergency drills.
9. Investigate, prevent and control the dangerous points around the enterprise or in the process of operation that are easy to cause accidents due to natural disasters.
10. Basic safety work and education and training programs. On-site principal, safety management personnel, special operations personnel holding certificates and on-site production front-line workers' education and training.
Other information that needs to be checked.
Verb (abbreviation of verb) check method and timetable
This inspection is mainly based on self-examination and self-correction of production and business units in various industries. The town government organizes relevant departments to inspect and supervise the implementation of the main responsibility of production safety and the self-examination and self-correction of production and business units.
(1) Self-examination and self-correction stage (from now until June 30th, 165438+): All kinds of production and business units should mobilize their employees, seriously carry out self-examination and self-correction of their own safety production scenarios, conduct all-round safety inspection of each post and every link of their own units, implement the responsibility system for safety production at all levels, seriously carry out self-examination, comprehensively and carefully investigate and manage all kinds of hidden dangers of accidents, strengthen preventive measures, and comprehensively carry out major safety production inspections. After a major inspection, we will further improve the daily inspection system of enterprises and improve the on-site management level of enterprise workplaces.
(II) Inspection and rectification stage (65438+February 1 to 65438+February 15): On the basis of enterprise self-inspection, the town government conducts a comprehensive inspection on the safety production of production and business units within its jurisdiction, focusing on the enterprises and industries with frequent accidents, focusing on tracking and urging the major hidden dangers found in the rectification inspection. Please ask Zhen 'an Safety Supervision Office to check the safety of chemical enterprises, metallurgical casting enterprises and fireworks and firecrackers; Enterprise management stations and park offices shall conduct scene safety inspections on industrial enterprises (except chemical industry, metallurgical casting, fireworks and firecrackers) within their jurisdiction; The security inspection site of civil explosives, fire fighting and crowded places by the police station within its jurisdiction; Road traffic safety scenes of agricultural road offices, traffic police teams, police stations and agricultural machinery stations; Rural construction service station liquefied gas filling point inspection site; Safety inspection scheme for the construction management station of the project under construction; Wen Wei's inspection of food and students' school activities and school bus safety; The special rectification site of wharf crane in Nonglu Office; The site where the agricultural machinery station carries out the safety inspection of agricultural machinery; The water pipe station summarizes the safety inspection scenes of the water conservancy industry, and after being signed by the department head, it will be reported to the town safety Committee office before 65438+February 65438+May.
(III) Town government supervision stage (65438+February 15 to 65438+February 20): Party and government leaders led a team to supervise and take charge of production safety inspection scenarios of various lines.
Work requirements of intransitive verbs
(a) comprehensive inspection, leaving no dead ends. In this major inspection, the main responsible persons of all production and business units should carry out self-examination and self-correction in combination with the implementation of the main responsibility of enterprise safety production, guide the safety responsibility to be decomposed into each production link and post, ensure that the task is clear, the responsibility goes to people, and the inspection is in place, and carry out a comprehensive safety inspection in accordance with the requirements of "never letting go of a loophole, never letting go of a blind spot and leaving no hidden danger". Villages and relevant departments should conscientiously implement their regulatory responsibilities and carry out supervision and inspection in a down-to-earth manner, paying attention to supervision and inspection of key industries as well as on-site inspection and spot checks. They should not only pay attention to the inspection of production lines, workplaces and production equipment, but also pay attention to the inspection of safety systems, operating norms and personnel management to ensure that the safety production supervision network covers all regions, industries and posts.
(2) Thoroughly rectify, leaving no future trouble. Each inspection team should carefully check to find hidden dangers, promote rectification, lay a solid foundation and prevent accidents. Hidden dangers and problems found in the inspection should be classified and summarized according to the scene to ensure that the rectification measures, responsibilities, funds, time limits and plans are in place. If it can be rectified immediately, it should be checked and corrected immediately; Temporarily do not have the conditions for rectification, it is necessary to formulate rectification plans, implement preventive measures, designate special personnel to keep an eye on them, and rectify them within a time limit; If the hidden dangers are serious and the safe operation cannot be guaranteed, enterprises and retail units shall be ordered to suspend business for rectification, and those who fail to make rectification shall not resume their operations.
(3) Careful inspection does not show respect. In view of the strong demand in the energy, raw materials and transportation markets in the fourth quarter, we will carry out in-depth special actions to crack down on illegal production, operation and construction found in the safety inspection to prevent a resurgence. It is necessary to implement the responsibility system for safety supervision at all levels, strictly implement the "four unifications" strike measures of stopping production for rectification, severely punishing, shutting down and banning, and strictly investigating the responsibility, ensure that all measures are implemented, establish and improve the joint law enforcement mechanism of departments, and do a good job in coordination and convergence between departments to prevent serious production safety accidents caused by out of control and pipe leakage.
Safety production prevention self-inspection scheme 5
I. Purpose of inspection
In view of the frequent occurrence of rain, fog, snow and ice in winter, and the neglect of safety production at the end of the year and the beginning of the year, in order to prevent major safety accidents at the end of the year and ensure safe and orderly production, our unit specially carried out this winter safety inspection.
Second, the inspectors
The project department of our unit has set up a safety inspection team with the following personnel: Team leader: Wang Huaping.
Deputy Team Leader: He Shimin, Chen Yingli
Members: Wang Jinxing, Wu Qun and Liu Jianxin.
Zheng yujiang county Feng
Feng Youjun Jiang Ying Jia Fuxia
Third, check the key points
1, security system
Hazard analysis and emergency rescue plan, winter construction safety measures, technical disclosure of construction safety, publicity, education and training of winter construction safety production knowledge.
2. There is no "three violations" on the construction site.
Whether there are dangerous projects such as large-scale hoisting, whether there are "three violations" and the specific manifestations of "three violations".
3, fire prevention and riot prevention measures
Whether the management places of all kinds of inflammable and explosive articles are equipped with fire-fighting equipment reasonably and effectively.
4. Traffic control measures in the construction area
Traffic signs shall be set up and necessary traffic control measures shall be taken on the road sections constructed on the edge of open roads; Warning signs should be set at the entrances and exits of construction areas that restrict social vehicles from entering and leaving.
5, field workers wear safety protection articles.
How many field workers are there in the inspected bid section, and how many people wear safety protection articles as required.
6, wellhead, high altitude limb safety protection.
Protection measures for pile foundation, reserved holes, ladders and bridge sides, and set up scenes to prevent being caught.
7, the construction of electricity safety
Temporary electricity erection, whether it is in accordance with the specifications, whether the distribution box meets the requirements, and whether there are daily inspection records.
8, the construction site safety warning
Whether there are safety warning signs on site and whether they are comprehensive.
9, homework personnel living quarters management
Whether the heating facilities in the workers' dormitory are managed by special personnel, whether there is any phenomenon of naked fire heating and disorderly pulling and connecting electrical appliances, and whether the dormitory lines are erected according to the specifications.
Four, hidden dangers and corrective measures
After receiving the notice from the superior, our community set up a safety inspection team to conduct a safety inspection on the construction site. Potential safety hazards are found, and the corrective measures are as follows. Screening for potential safety hazards (Feng Ming Building):
1. The fire extinguishers in the warehouse are all in the corner, so it is impossible to put out the fire in time and effectively in case of fire.
2. The fire extinguisher next to a distribution box on the west side of the absorption tower failed to inflate in time.
3. the steel frame behind the third floor of building a is too close to the telephone pole, which is easy to conduct electricity and cause fire.
4, the scene (template piled up neatly, not clear in time.
The rectification measures are as follows:
1. The fire extinguisher in the warehouse has been placed in a conspicuous place at the door of the warehouse. In case of fire,
It can be put into use immediately.
2. The failed fire extinguisher beside the distribution box on the west side of the absorption tower has been replaced.
3. The person in charge has been informed to dismantle it as soon as possible. Ensure that no safety accidents occur.
4. Formwork (wood square) has been stacked neatly and orderly.
The meaning of verb (verb abbreviation) test
1, through the construction safety inspection, understand the situation of safe production, and provide information basis for analysis and research to strengthen safety management;
2. Find problems, expose hidden dangers and take effective measures in time to ensure safety in production;
3. Summarize and exchange the successful experience of safe production, and promote the improvement of safe production level in this region and even in the industry;
4. Use the inspection to further publicize, implement and implement the safety production policies, various safety inspections and your rules and regulations;
5, strengthen the safety awareness of leaders and the masses, stop illegal command, old card illegal operation, improve the consciousness and sense of responsibility of production safety.
Relevant clauses of safety production prevention self-inspection scheme:
★ Model essay on safety production self-inspection report
★20 17 year safety inspection implementation plan
★ Three major safety inspection schemes in flood season
★ Safety inspection measures
★ Model essay on safety production work plan for this winter and next spring in 2020.
★ Seven national production safety activity plans
★ Safety production inspection scheme
★ 20 17 Implementation Plan for Safety Production Improvement
★ Model safety inspection system
★ 6 Model essay on safety production inspection system