question 1: what methods and materials should be used for scaffolding on the roof (come in and look closely, 11 points)? It is best to remove the floor tiles for waterproofing. The scaffolding must ensure that the water does not reach the floor, that is, it is completely closed. The house is almost transparent, with steel frames and sun panels (scientific name is acetate), but it is too hot in summer, and the whole sauna is 35 square meters. Ha ha.
question 2: which material is durable and not heavy for scaffolding on the roof? In recent years, it's all colored steel tiles, columns and so on. Just use square pipes
Question 3: How much is the material for roof scaffolding by hand? It ranges from 111 to 151 per square meter, depending on what material is used. Ask several families how to take it. Bargain yourself. Low price and poor materials. Equal condition.
Question 4: What are the taboos for building a shed on the roof? Pay attention to the sun exposure
Question 5: It is better to build a shed on the roof or to build a house in waterproof glue, or it is best to build a shed, which can not only put some sundries, but also relax here if the roof is green. Waterproofing from materials to construction, if a link goes wrong, it will eventually break down and leak.
question 6: how high is the roof scaffolding? 1. air circulation insulation method. It is to cover the roof with a hollow interlayer of about 31 cm, which can effectively isolate the heat transfer effect when the sun is exposed in summer because there is flowing air below.
2. Water insulation method. This method requires high quality of the roof. Nowadays, many houses use this heat insulation method, and the roof is usually a shallow puddle, about 1.5 cm deep. This kind of roof heat insulation method can effectively and reasonably reduce the indoor temperature and is relatively simple.
3. White paper reflection method. As the name implies, it is to lay a layer of white paper with smooth surface on the roof. This material is tin paper, which is not easy to get greasy and can strongly reflect light and insulate heat.
4. At present, there are many methods for roof insulation. You can lay a pearl sand insulation layer with a thickness of 11 cm on the roof, and then make a layer of cement prefabricated insulation board. If it is a cast-in-place reinforced concrete roof, a 21 cm thick soil layer can be stored on it for greening and planting flowers and plants, which not only beautifies the bad environment, but also has the function of heat preservation and heat insulation.
5. Roof heat insulation method The invention discloses a roof leak-proof heat insulation method, which covers the whole roof with glass steel plates and bonds the glass steel plates into a whole.
compared with the prior art, it has the advantages of easy construction, high material strength, light dead weight, long service life, good leak-proof and heat insulation effect, etc.
6. If the users at the top floor adopt the method of laying ceramsite concrete for heat insulation, the indoor temperature can be greatly reduced, which will not only lead to a comfortable summer, but also effectively save electricity consumption and reduce the expenditure of electricity. As a roof thermal insulation layer, ceramsite concrete has a good moisture-proof and waterproof effect with effective thermal insulation. Now ceramsite concrete has been widely used as toilet backfill and roof thermal insulation layer.
question 7: can a roof made of stainless steel be scaffolding? Hello, yes. I suggest 314 stainless steel pipe, because 211 stainless steel pipe is easy to rust if it is exposed to rain and water for a long time in the open air.
question 8: how to build a shed when the sloping roof leaks rain? What material can be used for durability? Please give some valuable advice from experienced friends. I don't know if yours is made of cement, so there's no way to use the tile cover.
Question 9: The roof scaffolding is waterproof and leak-proof, and the roof shed is waterproof and sun-proof. What material is good? The waterproof and leak-proof effect of metal material is the best. If it needs a certain amount of light, it is still a sun panel (the disadvantage is that it needs to be replaced regularly). If economic conditions permit, use glass.
Question 11: What does scaffolding mean? It is a product manufacturing process that takes the metal backplane structure as the matrix, fixes all components and devices on the backplane, and then connects the components with wires to form a circuit, thus realizing the functions of electronic equipment.