Current location - Recipe Complete Network - Catering industry - Kitchen countertop size
Kitchen countertop size
Kitchen countertop size: the width is generally 40-60cm and the height is generally about 500-600cm.

There are two kinds of kitchen countertops, namely 12.7mm and 27 mm. The height of the water side behind the kitchen countertop is generally 50 mm As for the length of the kitchen countertop, it is generally necessary to design and install it according to the structure and length of the cabinet and the needs of the owner. At present, there are generally 80cm, 75cm and 65cm in the height of cabinet countertops available on the market, and the height of national standard cabinet countertops is 80cm.

The method to determine the optimal height is: the operator's forearm is raised horizontally, and the height from the elbow back to 100- 150mm is the optimal height of the kitchen countertop. According to the physical condition of most of our orientals, it is suggested to choose 80-85cm, with the average height 160- 170cm as the reference frame, which is suitable for both men and women at home.

Matters needing attention in kitchen countertop decoration

1, ensure that the kitchen floor, wall and top are decorated, and then install the countertop. Mainly to avoid the error between the actual environment and the scene at the beginning of the cabinet design after the kitchen decoration, resulting in the failure to install the countertop.

2. Clean up the installation site before installing the platform. Because the countertop is installed in the reserved position as a whole, in order to avoid improper installation of the countertop caused by the sanitary condition of the reserved position, the installation site needs to be thoroughly cleaned before installing the countertop, especially the ground where the countertop is installed.

3. Use professional glue when installing, and do a good job of grinding and polishing. Generally, the installation of countertops is by splicing, so professional glue should be used when splicing to ensure the sealing of countertops. At the same time, for the beauty of the joint, the construction workers can also use a grinder to polish it, making the joint more beautiful and fashionable.